Reviews Automatic Tape Extruder

Official Creality Ender 3 S1 3D Printer with Direct Drive Extruder CR Touch Auto Leveling High Precision Double Z-axis Screw Silent Board Printing Size 8.6X8.6X10.6in, Upgrade Ender 3 V2 for Beginners

  • ...e engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU..
  • CR Touch Auto Bed Leveling: Upgraded CR Touch 16-point automatic bed leveling technology saves you the trouble of manual leveling. Easy to use, the intelligent leveling system can automatically compensate for the printing height of different points of the heatbed..
  • Removable Spring Steel Print Sheet: Different from ender3, ender 3 pro and ender 3 v2, this new-released FDM 3d printer comes with a removable PC spring steel platform. The innovative printing platform is a combination of a PC coating, a spring steel sheet and a magnetic sticker, which sticks to the surface immediately when released. The PC coating brings good adhesion and printed models can easily be removed by bending the print sheet..
  • Higher Printing Precision & Easy to Install: With a Z-axis dual-screw+Z-axis dual-motor design, Ender-3 S1 works smoother and more synchronously to lower the possibility of lines and ridges on the sides of your....
Check Stock

Transmission Filler Cap, Transmission Filler Cover Transmission Filler Plug 25615 RCL 003 Gear Box Accessory Replacement for ATF Automatic Transmission Filler Plug Motor john deere x360 hydrostat tra

  • 【Easy to Install】- Automatic Transmission Vented Fluid Filler Cap，sophisticated production provides excellent quality, can be easily installed with the adhesive tape on the back.does not require complicated operations.Save your time and energy..
  • 【Fitment】- Replacing OEM numbers for reference: 25615‑RCL‑003, replacement for Honda. Transmission Filler Cap is manufactured according to the original factory standards and is very suitable for your model.Please confirm your model before purchase..
  • 【ABS material】- Transmission Cap Cover Replacement is made of high‑quality ABS material sturdy, durable and has a long service life.resistant to rust and corrode, rugged and durable. Conform to strict quality control standards, dependable to use..
Check Stock

Befenybay 3D Printer Direct Extruder Support Kit Easy Print Flexible Filament for Creality Ender-3, Ender 3 Pro,CR-10,CR-10S

  • 【Material】Plate is made of aluminum alloy sheet material,dual gear extruder is made of aluminum alloy.
  • 【Advantage】A direct drive extruder improves extrusion and retraction.
  • 【Widely Used】Used for Ender 3/Ender 3S/Ender 3 Pro/Ender 3 V2/CR-10/CR-10S 3d printer.
  • 【Filament】More material options,easy to print TPU flexible filament.
  • 【Package Include】1kit direct extruder support plate with 3pcs pulleys, 1pcs length 60cm motor extension cable,2pcs Teflon tubes,1kit metal dual gear extruder,1pcs 40mm height stepper motor.
Check Stock

Shimpo Handheld Extruder

  • Handheld Extruder includes 5 Dies and 1 Blank die made of stainless steel..
  • The barrel unscrews and you fill it with clay, then use the extruder like a calking gun..
  • Hollow die set available Product number: H-EXTRD-HDS.
  • The 4 IN 1 Extruder die set comes with 9 dies and 1 block out die. H-EXTRD-4IN1.
  • Hand held extruders are great for forming anything from coils to small slabs and can be used in a variety of construction techniques.
Check Stock

Flashforge 3D Printer Adventurer 3 Lite Auto Leveling Quick Removable Nozzle High Precision

  • Auto leveling – Removable and Heating bed,much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG etc.
  • Detachable Nozzle – Buckle design removable nozzle supports quick replacement,no need to disassemble whole extruder when performing maintenance.
  • Automatic Loading-Get rid of manual feeding operation, ensure even feeding.
  • Out of box – Super quiet,the sound of operation is 50 decibels. A fun STEM educational experience in mechanical engineering and electronics.
  • What you get – Flashforge 3d printer Adventurer 3 Lite,12 months warranty, lifetime technical assistance and 24 hours professional customer service.
Check Stock

Streamline Imagined T-Rex Tape Dispenser

  • APPLICABLE TAPES--This automatic tape dispenser is suitable for various tapes with no protective film: scotch tape, kraft paper tape, double-sided tape, teflon tape, fiber tape, warning tape and etc. The maximum cutting length can reach up to 999mm, about 39inches. Suitable tape width is 6-60mm. If you have any other needs, welcome to consult us first..
  • SAVING YOUR MUCH TIME--This machine can hold two rolls of tape at the same time, which is convenient for multi-person operation, greatly saving much time and improving work efficiency! NOTICE: If loading two rolls, the sum of width of tape must be equal to or within 60mm..
  • A INTELLIGENT MACHINE--Via “SELECT” button, you could preset 6 groups of cutting length, and then the machine will automatically save them, once set, there is no need to set it again after power off and restart..
  • OVER EASY TO USE--This electric tape cutter is over easy to use: Please load the tape first, next set the required length, then set the mode (automatic or manual), and finally press the start button. After the machine allocates the correct length of tape and cuts it, pull it down. It is equipped with an English manual, please read the manual carefully before use.
  • if there are still any questions, please contact us for help....
Check Stock

FLASHFORGE Creator Pro 2 3D Printer with Independent Dual Direct Drive Extruder for 4 Printing Modes, Metal Frame Structure, Acrylic Covers, Stable & Precise Printing with ABS, PLA, PETG, PVA, Hips

  • 【Independent Dual Extruder】Compared with traditional parallel extruders, the independent dual extruder structure can print copy and mirror models at the same time, and better supports soluble consumable printing. Higher printing efficiency.
  • 【Considerate Machine Design】Fully enclosed body with removable cover to meet the temperature requirements of different strands.
  • All metal frame body with stable structure.
  • Alloy material construction plates with 6.5mm thick alloy material which can be heated, resistant to transformation..
  • 【Residue Scraping Design】In the process of dual printing mode, the filament tends to overflow due to the continuous heating of the nozzle. This design of dual extruder 3D printer Creator Pro 2 helps avoid misalignments in the colors, and get cleaner dual prints..
  • 【Widely Filament Compatibility】240℃ direct drive dual extruder works with PLA, ABS, PVA (print with PLA), HIPS (print with ABS), PETG Filament, support 3rd party filament. CP2 The Best Dual Extruder 3D Printer Choice!.
  • 【Warranty and Service】All FLASHFORGE 3D printers come with lifetime technical support and a one-year warranty. We provide 24-hour online customer service, if you have any questions about the product operation or so....
Check Stock

Raise3D Pro3 Dual Extruder 3D Printer

  • Huge Build Volume: Single: 11.8" × 11.8" × 11.8" Dual: 10" × 11.8" × 11.8".
  • Maximum Nozzle Temp: 300ºC, Max Build Plate Temp120ºC. Prints with a Variety of Materials up to 300ºC Including: PLA/ ABS/ HIPS/ PC/ TPU/ TPE/ PETG/ ASA/ PP/ PVA/ Nylon/ Glass Fiber Infused/ Carbon Fiber Infused/ Metal Fill/ Wood Fill.
  • Auto Bed Leveling & Flexible Build Plate. Fully Enclosed with Air Flow Manager & Automatic Pausing with Door/Lid Sensors.
  • Interchangeable Hot End and Extruder Cover, Z-axis rod stiffness increased by 75% to deliver a more stable performance..
  • Note: 3D Printlife filament profiles are loaded in Raise3D’s Open Filament Program, for questions on filament settings or compatibility please customize please reach out to 3D Printlife..
Check Stock

Official Upgraded Ender 3 v2 Ender 3 CR-10 All Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Creality Ender 3 Pro/Ender 5/ CR-10 Series 3D Printer

  • The gray metal extruder is an original upgrade replacement part for Ender 3, Ender 3 Pro,Ender 5,CR-10, CR-10S, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus..
  • Works better than original plastic stock extruder, make loading filament much easier. Even smoother than the red metal extruder..
  • Compatible with PLA/ABS/Wood/TPU/PTEG, 40 Teeth drive gear feeds the 1.75mm filament very smoothy..
  • Easy to Install. The extruder diy kit comes with a instruction on how to put it together, which makes it more easy to install..
  • 100% brand new and original Creality exturder. If you have any question, please feel free to contact us..
Check Stock