Reviews Automatic Concrete Brick Machine

Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders & Circular Saws - Long-Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Segmented Diamond Blades For Long-Lasting & Reliable 1.25” Depth Concrete, Cinder Block & Brick CUTTING | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
  • ✅ AVOID BLADE WARPAGE, Premature Wear and slow down periods with lower priced blades by relying on Makita’s advanced air flo....
Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

  • Concrete Screw Flange 5/8" Head (depending on the length, it will be either full or partial threaded). The diamond tip allows for superior penetriating into hard materials. Great for anchoring items to concrete, brick, block, or other masonry materials. Ceramic coating exceeds 500/hrs salt spray resistance.
  • An externally threaded, hardened screw with a double lead, consisting of alternating raised and lowered threads with notches cut into the raised threads, and a diamond-shaped, nail-type point. Cuts its own threads and when used in concrete, block or brick. Eliminates the need for an anchor when used in light or medium-duty applications. When used in concrete, it can be removed and re-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
  • Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
  • Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of t....
Check Stock

BINOTA Concrete Hole Saw SDS Plus Max Shank for Cement Brick Wall, Kit 40 65 80 100 125 MM

  • The hole saw alloy teeth are made of high-strength tungsten-cobalt alloy and have a sharper shape design. Hole saws have better hole opening efficiency..
  • The surface of the carbid hole saw is smooth: the waste is easier to remove when opening, and the operation is more stable and the opening effect is better..
  • It can be used to open self leveling concrete, hollow brick, cement wall, concrete wall, red brick etc. when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc..
  • The concrete drill bit adopts a cross type, which is more stable and not easy to slip when drilling, and the high quality masonry drill bit is applicable to masonry wall, brick walls, cement boards and so on..
  • The core drill arbor of the hole saw is designed with SDS PLUS 110mm and SDS MAX 160mm, which are perfectly matched with the round shank four-hole and five-hole electric impact drills respectively. The length can meet the drilling requirements of most wall thicknesses..
Check Stock

BINOTA Concrete Hole Saw SDS Plus Max Shank for Cement Brick Wall, Kit 30 40 65 80 100 MM

  • The hole saw alloy teeth are made of high-strength tungsten-cobalt alloy and have a sharper shape design. Hole saws have better hole opening efficiency..
  • The surface of the carbid hole saw is smooth: the waste is easier to remove when opening, and the operation is more stable and the opening effect is better..
  • It can be used to open self leveling concrete, hollow brick, cement wall, concrete wall, red brick etc. when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc..
  • The concrete drill bit adopts a cross type, which is more stable and not easy to slip when drilling, and the high quality masonry drill bit is applicable to masonry wall, brick walls, cement boards and so on..
  • The core drill arbor of the hole saw is designed with SDS PLUS 300mm and SDS MAX 300mm, which are perfectly matched with the round shank four-hole and five-hole electric impact drills respectively. The length can meet the drilling requirements of most wall thicknesses..
Check Stock

The Book of Five Rings

  • 14 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum....
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig....
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and....
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum....
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is....
Check Stock

HBKEEN Core Drill Bit for Concrete Diamond Laser Welded Core Bits 1-1/4"-7 Threaded for Hard Concrete Brick and Block (8 inch）

  • {Specification} 8 inches Laser Welded Diamond Wet Drilling Core Bits.
  • {Drilling Depth} 14" with mesh segments. Fast,smoothly, long life.
  • {Application} #30/40 diamond grit, designed for drilling concrete, reinforced concrete, hard brick, block and other hard masonry.
  • {Drilling method} Wet use only. Hand held drill, drilling machine.
Check Stock

Ceiling Nailer Fully Automatic Nailing Woodworking Decoration Integration for Light Steel Keel, Steel Plate, Concrete, Bridge, Anti-theft (A9, Handheld)

  • ...f the silencer hole and is absorbed by multiple silencers to achieve the ultimate silencer effect..
  • 【Adjustable power:】 4 blocks of adjustable power. Can hit 1 cm thick steel plate.
  • can hit C20-C70 grade concrete. It contains five poles and has a total length of 3.4m.
  • it can be used for 5.5m high floor slabs..
  • 【Automatic slag discharge:】 Comes with diversion groove, no need to disassemble and clean dust after finishing. After the integrated nail is excited, the shock wave discharges the residue from the muffler hole through the laminar flow groove and finally from the slag exhaust hole..
  • 【Material:】 High-strength steel is used to prevent corrosion and wear. The high-quality military materials are only used for military special technologies to ensure 100% firing and life expectancy of more than 20,000 times..
  • 【Scope of application:】 light steel keel, steel plate, concrete, wood, support installation, bridge, monitoring, anti-theft network, etc. 1 block is suitable for high-standard concrete.
  • 2 block is suitable for ordinary cement board.
  • 3 block is suitable for ordinary brick wall.
  • 4 block is suitable for wooden soft base..
Check Stock

Mungo MN Nylon Plug Anchor 2 inch Length 3/8 inch Plug and Drill Diameter Box of 50 Premium Grade Anchor for Drywall Brick Concrete and Stone

  • load 314 lbs-concrete, 179 lbs-brick, 44 lbs lightweight concrete.
  • 2 inch length, 3/8 inch plug and drill diameter, 2-9/16 inch drilling depth.
  • Use with Drywall, Concrete, Brick, and Stone.
  • Appropriate for wood, particle board, and metric screws. Indoor and outdoor applications.
  • -40 degree fahrenheit to 212 degree fahrenheit temperature range.
Check Stock

KSEIBI Variable Speed Rotary Hammer Drill 1-1/4 inch, SDS Plus Demolition Hammer for Concrete Drill 13Amp, 4 Functions Reduced Vibration System

  • MAX POWER PERFORMANCE L-shaped SDS drill with a powerful 13 Amp motor with 7 Joules Impact Rate with SDS Plus function let you finish any projects on Masonry, Concrete, Brick, Stone etc. or you can use the extra chuck for normal shank for metal and wood jobs, 0-900RPM, 0-4350BPM, The Heavy Duty Drill has drilling capacity: 1-1/4 inch for concrete, 1-9/16 inch for wood, 1/2 inch for steel..
  • FOUR FUNCTIONS Use the knob hammer drill switch to switch between Demolition Chisel Hammer Drill to make holes with rotary drill SDS bits, Electric Hammer Chiseling both positions ideal for projects on Concrete, Brick, Granite, etc., and normal Drill Position ideal for drilling and making holes in wood, metal, aluminum, etc. the last function Position Adjustment help you to chose the chisel position makes your job easy, you can use adjust depth gauge to preselect drilling depth for blind holes..
  • VARIABLE SPEED pre-selection speed wheel to set the right speed for every job attached to HEAVY DUTY Soft-grip Handle for comfortable handling and optimal control with Vibration Reduction System ensures optimal working comfort and low vibrations side handle for secure two-handed control and low vibrations while using the electric chisel hammer.
Check Stock