Reviews Auto Voltage Tester

HDMI Tester Portable High Definition Network Cable Tester Checker NF-622 LED Indicator to Check Disorder Short Open and Cross Status of HDMI Cables and Hd Wire Test Ideal for Troubleshooting

  • 【Application of UT681】UT681 Handheld HDMI Cable Tester is a professional tester for testing HDMI cable (HDMI 1.2V/1.3V/1.4V/2.0V).It supports two test modes, fast scan mode and full display mode..
  • 【Function of UT681】This Cable Tester Checker can quickly scan and test up to 19 wires and decide which one is short circuit, open circuit, or in wrong order.Support Continuity Test,Short Circuit Test,Crossover Test,Network Cable Test..
  • 【Double testing mode】At the power on state, short press the ON/OFF/Option key to switch between scan mode and full display mode. The state indicator flashing style is to identify which mode is chosen..
  • 【Cable Type That Can Be Measured】Three types of HD cables can be tested: a.Both ends are standard HDMI connectors (Type A - Type A).
  • b.Both ends are HDMI Mini connectors (Type C - Type C).
  • c.One end is HDMI connector, one end is HDMI Mini connector (Type A - Type C).
  • 【Safe Tester】HDMI tester support battery low voltage Test.In order to make sure the HD cable tester’s performance, when the battery voltage is lower than about 7.2V, the blue light flashes, prompting to replace the battery.Auto shut down function, when no operation during the last 10 minutes, the instrument will automatically shut down..
Check Stock

Non-Contact Voltage Tester Pen - Dual Range AC Voltage Tester 12V/48V-1000V, Live/Null Wire Circuit Detection Tester Breakpoint Finder Electrical Outlet Voltage Detector, Measure AC Circuit Tester

  • Safety and Security: Non-contact voltage tester has passed the CE CAT III 1000V CAT IV 600V test certification. When the ac electrical tester pen detects a voltage, the probe will flash red and beep, the higher the detected voltage, or the closer it is to the voltage source, the dual range voltage detector will beep at a higher frequency. The ac socket tester detects low voltage and neutral and triggers a yellow flashing light, and detects high voltage and live wire triggers a red flashing light.
  • Non-Contact: The ac circuit tester uses a non-contact method to measure voltage, with an NCV induction probe for detecting ac voltage, you only need to place the tip of an electric circuit detector near an outlet or power cord to detect the presence of voltage.The dual range circuit voltage tester is a safe double insulation, you don't have to worry about being shocked, voltage detector tool is very safe, and it is an ideal device to help determine the neutral or live line and breakpoint testing.
  • Dual Range: The electrical current tester detects standard voltage and low voltage ranges (12-1000V AC / 48-1000V AC), making the measurement more flexible and accurate. NCV sensitivity is automatically adjusted from low to high, low sensitivity can detect doorbells, ....
Check Stock

UEI Test Equipment DMG150 Digital Micron Gauge

  • The testo 760-2 amprage tester is ideal for electric testing on refrigeration, air conditioning and heating systems and allows for quick and convenient application.
  • Equipped with an auto-test setup, the volt meter offers precise readings, detects the lead connection, and prevents switching from V to A or A to V if leads are not in proper socket.
  • To eliminate mistakes, save time and optimize accuracy, the voltage tester automatically detects testing and selects the correct meter configuration.
  • Thanks to the rugged housing that the lead holder was conveniently molded into, the HVAC tool with its backlit display offers reliable durability in almost every environment.
  • Includes the 760-2 voltage meter, including test leads, 3 AAA batteries, type K thermocouple adapter, instruction manual, quick start guide, and certificate of conformity.
Check Stock

Ignition Coil Tester, Accurate And Reliable Hand‑Held Coil On Plug Fast Ignition Tester, Coil On Plug Tester, Professional Coil On Plug Quick Tester Diagnostic Tool for Home Laboratory

  • ...O USE --- correctly connect the connector and sensor head to the tester, align the sensor head with the ignition coil and start working, and judge the working status of the ignition coil according to the lighting results. After receiving the signal, the tester will determine whether the COP is correct The amount of voltage and arc duration..
  • LIGHT INDICATION --- If the voltage is correct, the tester will beep and the red LED indicator will flash.
  • if the arc duration is correct, the green LED will also flash. Use the ignition coil tester to eliminate guesswork, and the test results are accurate and reliable..
  • WIDELY USED --- The handheld Coil On Plug rapid ignition tester is designed to easily and quickly determine whether the COP produces a suitable spark for the plug. Battery powered, stable and professional performance. It is a must-have for any individual, professional mechanical repair shop and auto shop..
  • WARRANTY AND SERVICE --- Customer satisfaction is our top priority. We provide you with 24-hour online customer service and a 180-day refund policy. If you have any dissatisfaction, you can unconditionally request a full refund. Click to buy now!.
Check Stock

INFURIDER Digital AC/DC Volt Amp Clamp Meter,Wireless Bluetooth Auto Ranging 1000A Ammeter Clamp Multimeter for Voltage,Current,Ohm,Cap,Temperature Tester

  • ⚡【AC/DC Clamp Meter】: The highly sensitive AC DC volt amp clamp multimeter feature with TRMS 6000 counts auto-ranging, be able to accurately measure AC/DC voltage,AC/DC current to 1000A,resistance,capacitance,diode,temperature(℃/℉),Hz,continuity buzzer test,etc..
  • ⚡【Remote Display Via Bluetooth】：Scan the QR code and download the APP first.The wireless Bluetooth digital clamp multi-tester will auto connect with your smart phone in the AILink app(within 15m).Which convenient for you to monitor,log and analyze the max/min/current of volt amp ohm in real time..
  • ⚡【Safety & Protection】：The amperage meter with rubber sheeve to protect your volt meter from being broken by fallen. Overload protection is up to standard of CATⅡ1000V or CATⅢ600V in all range.Non-contact voltage(NCV) function can detect voltage without touching any wires and avoid electric shock ..
  • ⚡【Easy to Operation】：The True-RMS voltmeter ammeter with large backlight display,you can read and record the value easily in darkness.Feature with data hold,low battery indication,auto range function.Press “REL” will show the relative testing and zeroing the clamp tester to obtain more accurate measurement..
  • ⚡【Accurate Current Meter】The AC DC Current measureme....
Check Stock

UNI-T Digital Multimeter Tester UT139C, Voltage Meter Tester Capacitance Meter Frequency TRMS 6000 Counts Auto/Manual Ranging

  • True RMS Multimeter Kit UT139C. 6,000 counts. Measures AC DC voltage (600V max), AC DC current (10A max), resistance, capacitor tester, frequency, temperature, diode test, bandwidth, etc. Ideal for electricians. Diagnose automotive, industrial and household electrical issue in a breeze..
  • Auto/manual ranges switchable multi meter digital. Relative mode. MAX/MIN. Data hold. LCD backlight. Auto power off. Troubleshoot home appliances, light fixtures, sockets and electrical panels. Besides, great volt meter and multimeter for checking automotive battery voltage, alternator output, etc..
  • Safe & Durable ohm meter multimeter. Safety rating: CAT III 600V. NCV detection feature effectively checks electrical status through measuring EM field intensity. Full range protection (600V). Thick rubberized cover and quality built-to-last electrical kit..
  • Easy to use electrical tester kit. Value pack includes: UT139C voltmeter digital, test leads (pair), temperature probe, paper manual, eManual (free download), gift box, and easy access to UNI-T 7/24 User Support (by email)..
  • UNI-T WARRANTY – A trouble-free experience with 100% 18-MONTH WARRANTY and 100% MONEY BACK GUARANTEE by UNI-T Direct!.
Check Stock

Transistor Meter Aideepen LCR-TC1 Multi-Function Capacitance Resistance ESR Tester 1.8 Full Color Display Transistor Meter for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET

  • 【Wild Application】:1.8" Full Color Display,Automatic detection of NPN and PNP transistors, n-channel and p-channel MOSFET, diode (including double diode), thyristor, Mega328,BJT, resistor and capacitor and various electric transistor testing..
  • 【Built-in Battery】:Built-in lithium battery, convenient and effective, the indicator light shows green when fully charged. Warm Reminder: The charging input voltage is 4.5V, please do not use it under overpressure, otherwise the tester will be damaged..
  • 【Add IR Decoder】: After the component detection is completed, the infrared remote control at the tester "IR" test hole, press the remote control key, the tester will be display the user code & data code and the corresponding infrared waveform after the successful decoding.
  • 【Auto shut-down Function】: Our advanced electronic transistor tester owns auto shut-down function.Convenient and practical..
  • 【Extra accessories】: use accessories, more convenient and efficient to complete your project(Please refer "Product guides and documents"to get user manual).
Check Stock

Schumacher SC1353 Battery Charger with Engine Starter Boost and Maintainer - 200 Amp/40 Amp 12V - for Cars Trucks SUVs RV Batteries

  • RELIABLE POWER: 40 Amp quick boost mode and 200 Amp engine start for cars, trucks, SUVs, marine vehicles, and RVs.
  • AUTO AMP ADJUST: Microprocessor-controlled to automatically adjust the amperage rate to charge and maintain.
  • BUILT-IN TESTER: Battery and alternator tester provides charge level and helps diagnose electrical problems.
  • auto voltage detection feature identifies....
  • FLOAT MODE: Float mode monitoring automatically maintains optimum battery charge.
  • SAFE AND RELIABLE: Reverse hook-up protection helps prevent damage to battery.
Check Stock

Klein Tools 69149 Electrical Test Kit with Multimeter, Non-Contact Voltage Tester and Receptacle Outlet Tester

  • The MM300 multimeter measures AC/DC voltage, DC current and resistance and has a safety rating of CAT III 600V, Class 2, Double insulation.
  • The NCVT-1 has a bright green LED to indicate the tester is working.
  • it changes to red and warning tones sound when voltage is detected.
  • NCVT-1 has a digitally-controlled ON/OFF power button and auto power-off feature to conserve and extend battery life.
  • Receptacle tester detects wiring configurations and indicates correct wiring, and identifies common wiring faults.
  • Identifies open ground, open hot, open neutral, hot/ground reversed.
  • it does not indicate quality of ground, multiple hot wires, or a combination of defects.
Check Stock