Reviews Auto Battery Disconnect Switchs

M Series Battery Disconnect Switch, 300A Marine Battery Cut Off Switch 48V Power Kill Switch Isolator Single Circuit Battery Shut Off Switch for Car Vehicle RV Trailer Marine Boat Solar

  • 【Battery Disconnect Switch】All boats and vehicles with an engine have at least one battery in order to start the engine and providing power for loads such as lights, electronics etc. This battery isolator switch is used for 48V DC systems to isolate and secure the electrical system, to achieve safe switching between batteries, loads, and charge sources..
  • 【Premium Material】The battery cut off switch is made of ABS plastic housing and Tin-plated Copper studs, which could contribute to maximum conductivity, protecting wiring from dirt, corrosion and rain..
  • 【Safety】Our marine battery switch meet CE Certification and ABYC requirements, one-piece terminal stud design never loosens over time. External ignition protection makes it safe for installation aboard gasoline powered boats..
  • 【Easy Operation】Battery disconnect switch with On/Off position. Switch ON=Power to closed circuit, Switch OFF = No power to the cut-off circuit..
  • 【Wide Application】This red battery disconnect switch could be used as a power cut off, greatly appliacable for RV, travel trailer, marine, boat, hull, camper, solar panel and emergency power battery pack etc, Eliminating any power draw from the battery when vehicle or boat is not in use, disconnects the battery safely..
Check Stock

EPEVER MPPT Charge Controller 40A 12V/24V Upgrade Tracer4210AN + Remote Meter MT50 Monitor + RTS for Solar Panel Charge Controller Regulator with LCD Display (Tracer4210AN + MT50+RTS)

  • ...ower:520W @12V battery or 1040W @24V battery. Max PV 100V. Common Negative grounding , Compatible with lead-acid and lithium-ion batteries..
  • 40Amp MPPT Charge Controller Tracking efficiency : ≥99.5%, Max. conversion efficiency 98% ,12V/24V Automatic Work System Voltage Recognition Auto-saving function: two voltage disconnect levels ,Charging power and current limitation function..
  • Support Lead-acid: Sealed (default)/ Gel/ AGM/ Flooded / User (9～17V@12V.
  • 18～34V@ 24V) & Lithium: LiFePO4 (4s/12V.
  • 6s/24V), User (9～34V) & User-defined.Battery temperature compensation function（only for Lead-acid battery) , Overheating power reduction function.
  • MT50 Remote Meter Automatic identify the controller, and display relevant parameter data , Diversified load control modes : Manual Control, Light ON/OFF, Light ON+ Timer, Time Control . RTS Temp sensor acquisition of battery(or controller) temperature for undertaking temperature compensation of control parameters,.
  • 2022 Upgraded version support choose Lithium types by controller buttons directly . You could also contact with vendor(Goland Century) services to get program firmware upgrade file , then you could set old version controller's Lithium types by controller buttons too . ....
Check Stock

Cocoweb Battery Operated Art Light in Oil Rubbed Bronze - 12 inch, Rechargeable Battery Included, LED, Remote Control, Dimmable

  • ✅ LED LIGHTING - Integrated LED nodes provide a warm-white light at 2700k color temperature to make the colors pop on your artwork, while emitting very little heat and no harmful rays preventing your art from cracking or fading with time..
  • ✅ ADJUSTABLE - Multiple points of adjustability allow you to rotate the LED bar, adjust the height on the frame, and fully adjust the brightness to your liking..
  • ✅ REMOTE CONTROL - A wireless remote control makes it easy to turn the lamp on and off from a distance, as well as control the brightness or turn on an auto shut-off timer for 1, 2, 3 or 6 hours..
  • ✅ BATTERY OPERATED - this picture light is powered by an external rechargeable battery, providing over 40 hours of light per charge. The battery connects to the lamp with a cord making it easy to disconnect to charge..
  • ✅ EASY INSTALLATION - The art light can be mounted directly onto the picture frame or the wall behind the painting..
Check Stock

Battery Tender 25 Foot SAE Extension Cable Charger and Maintainer Units Quick Connect Plugs

  • EXTENDED REACH: This lead extension cable will extend the reach of your battery charger by 25 feet.
  • COMPATIBLE UNITS: For use with Battery Tender Battery Chargers.
  • Battery Tender Junior, Plus, 2-Bank, 4-Bank, 5-Bank, and 10-Bank.
  • QUICK DISCONNECT: The quick disconnect harness makes it easy to connect it and forget it while your vehicle batteries charge.
  • MULTIPACK OPTIONS: If you have multiple vehicles to charge at once, Battery Tender extension cables are also available in packs of 4.
  • SPECIALIZED: Not for use with Battery Tender products that use hard-wired clips.
  • do not use with 6 Volt Battery Tender Plus or units with white....
Check Stock

QuickCar Racing Products 55-010 Red 2-1/2\ High x 2-1/2\ Wide Handle Battery Master Disconnect Switch with Black Mounting Panel

  • DUAL BATTERY DISCONNECT SWITCH: The master power cut off switch allows for two batteries to operate independent of one another, or for both to be in the ON or OFF position at the same time. Four position rotating switch provides Battery 1, both on, battery 2, both off alternatives. Removable rear cover insulates the rear terminals against any short circuits. 4 Removable side plates provided access for battery cables.
  • SAVE YOUR BATTERY: The battery kill switch can help you to shut down the power of battery easily and safely when not in use or storage so as to keep your vehicle from draining out of power as well as extend the life of your battery.
  • SOLID AND COMPACT SHUT OFF SWITCH: This battery disconnect isolator switch is made of PBT plastic housing, copper tin plating inner stud. Come with four stainless steel mounting screws and caps to help fix the switch tightly. The red knob is for On/Off control. Can not be removed from the switch. Stud Size: 3x5/16" (8mm). Ideal for marine/vehicles applications.
  • WIDELY APPLICATION: 1-2-Both-Off, Rating: 200 Amps Continuous,1000 Amps momentary at 12V DC. Can be used with 12V - 48V DC systems to isolate and secure the electrical system. Can stand alone or be locked together with other switch. Widely used for marine....
Check Stock

Buachois 2 Sets 50A 6AWG 600V Battery Connector Plug Lightweight Quick Connect Disconnect Wire Harness Plug Kit Towing Winch Quick Connect Systems(Black)

  • Wide range of applications: the battery quick connector provides simple and convenient method for connect disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector.
  • Size information: voltage: 12-36 volts DC.
  • package comes with 6 sets 2-4 gauge battery quick connector, including 6 connectors, 12 terminal pins, 6 caps, enough quantity to meet your different needs or replacement.
  • Quality and durable material: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, moisture, have long service time.
  • Convenient installation: you can install these battery cable quick connector disconnect plug quickly, insert the wires into the terminal pins, and then solder or crimp them, connector ends are identical, so either ends are suitable for connection to the power or load side.
  • Stable working environment: there are 12 pieces terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to ensure stable voltage and current.
Check Stock

Battery Tender Ring Terminal Harness Accessory Cable, 2 Foot Cord Adapter with SAE Quick Disconnect, 25 Pack

  • EASY CONNECTION: Ring terminals can be left connected to the battery for an easy connection when you need to charge again.
  • COMPATIBLE UNITS: For use with 12 Volt model Battery Tender Battery Chargers.
  • ideal for batteries that are difficult to access.
  • QUICK DISCONNECT: The black quick disconnect harness makes it easy to connect it and forget it while your vehicle battery charges.
  • MULTIPACK OPTIONS: If you have only a single battery to charge at once, Battery Tender Ring Terminal Accessory Cables are also available in a pack of 1.
  • SAFE CHARGING: This accessory cable is built with a 7.5 AMP fuse to protect your batteries in case of current overflow.
Check Stock

Battery Tender Ring Terminal Harness Accessory Cable, 2 Foot Cord Adapter with SAE Quick Disconnect

  • EASY CONNECTION: Ring terminals can be left connected to the battery for an easy connection when you need to charge again.
  • COMPATIBLE UNITS: For use with 12 Volt model Battery Tender Battery Chargers.
  • ideal for batteries that are difficult to access.
  • QUICK DISCONNECT: The black quick disconnect harness makes it easy to connect it and forget it while your vehicle battery charges.
  • MULTIPACK OPTIONS: If you have multiple batteries to charge at once, Battery Tender Ring Terminal Accessory Cables are also available in a pack of 25.
  • SAFE CHARGING: This accessory cable is built with a 7.5 AMP fuse to protect your batteries in case of current overflow.
Check Stock

Frienda 12 Pieces Red 6-10 Gauge Battery Quick Connector 50A 12-36V Battery Quick Disconnect Wire Harness Plug Kit for Motor Recovery Winch Trailer

  • Suitable for: the battery quick connector provides simple and convenient method for connect or disconnect power to a winch or other electrical device such as remote battery chargers, power inverter, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector.
  • What you receive: the package comes with 12 sets 6-10 gauge battery quick connectors, including 12 pieces connectors, 24 pieces terminal pins and 12 pieces caps, enough quantity to meet your different needs or replacement.
  • Durable to use: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, durable and reliable to use, not easy to break, have long service time.
  • Convenient installation: you can install these battery quick connector or disconnect plug quickly, just insert the wires into the terminal pins, and then solder or crimp them, connector ends are identical, so either ends are suitable for connection to the power or load side.
  • Stable function: there are 24 terminal pins made of red copper coated with silver in the package, which possess strong electrical conductivity and can reduce the resistance to ensure stable voltage and current.
Check Stock