Reviews Audio Output 12 Hours

ECOXGEAR EcoTundra Rugged Waterproof Floating Portable Bluetooth Wireless 120-Watt Smart Speaker with Dual Cup Holders

  • 100% WATERPROOF AND DUSTPROOF - meets IP67 international standards, no worries with rain, dirt or snow.
  • Drop it in your pool, lake or ocean - no worries, it floats.
  • Audio sources include Bluetooth, AM, FM or wired AUX-IN.
  • 120 WATTS PEAK OUTPUT - amplifier powers an 8-inch full range main driver speaker, a 3-inch tweeter and an oval passive subwoofer for a balanced sound with crisp highs, clear vocals, warm midrange, and deep bass.
  • ECOCAST compatible - pair up to 50 units together within 30-feet of each other for TruWireless Stereo Sound (TWS) and the ultimate party.
  • BLUETOOTH V5.0 - streams audio wirelessly from your device while inside or use it as a standalone speaker and stream audio from a Bluetooth enabled device up to 100 feet away.
  • or connect to the integrated wired AUX-IN jack.
  • BUILT-IN EQUALIZER - tune the audio output by selecting 1 of 5 presets to match your listening preference.
  • Back-lit buttons and large LED display for night viewing.
  • Fast 5V, 2.1A USB output port to charge all your USB compatible devices.
  • Oversized rugged wheels and telescoping handle for easy transport. Dual cup holders and a bottle open....
Check Stock

Samson Stage-412 Quad Handheld VHF Wireless Microphones+2 Wired Mics+Headphones

  • ...es per channel. Up to three simultaneous systems (region dependent). IR sync wirelessly matches receiver and transmitter frequency.
  • 200' (60m) operating range (line-of-sight). AC adapter included. SR412 Wireless Receiver. Rugged metal chassis. Dedicated Volume controls for each channel. Four 1/4" independent channel outputs. Three balanced XLR mixed outputs. VH12 Handheld Transmitters. Four Q6 Dynamic Microphone capsules. Each offers up to 10 hours of life via two AA batteries (not included). Stage 212 Wireless System. Operating Frequency: 173M198M. Number of Frequencies per Channel: 6.
  • Operating Range: 200' (60m). Frequency Response: 8015k Tone Key Frequency: 30k. SR212 Wireless Receiver. Dynamic Range: 100dB. Maximum Output: 1.37V. Output Connectors: Two 1/4" (6.3 mm) unbalanced, three XLR balanced. Audio Output Levels: -12dB. Power Supply: 100-240V, 50/60 0.4A, Output: DC 15V, 800mA. Dimensions: 17" x 6.75" x 1.5" (430mm x 170mm x 40mm). Weight: 3.08lb (1.4kg). VH12 Handheld Transmitters. RF Power Output: 10mW. Microphone Element: Q6 Dynamic.
  • Typical Life: 10 hours. Current Consumption: 120 mA typical. Dimensions (each): 2.16" x 10" (55mm x 255mm). Weight (each): 0.48lb (0.22kg). Includes: DJ1500 headphones. Detachable cable. Soft suede and leather e....
Check Stock

Blackmagic Design Teranex Mini SDI to Analog 12G | SD HD Ultra HD Supported Converter

  • SDI Video Input: 1 x 12G-SDI SD/HD/2K/4K auto switching.
  • SDI Video Output: 1 x 12G-SDI loop output.
  • Analog Audio Output: 2 channels professional balanced analog audio via XLR connectors. Right XLR can be configured for timecode output.
  • Multi Rate Support: Automatic switching between SD/HD/2K and 4K.
  • Updates and Configuration: USB or Ethernet.
Check Stock

Dingsun 192KHz Digital to Analog Audio Converter, Support USB Flash Drive/AUX/Coaxial/SPDIF/TOSLINK Input to R/L Stereo/3.5mm Jack Headphone Output, Support Decoder: SBC, AAC

  • ♬【Digital to Analog Audio Converter】Simple solution to convert coaxial or digital optical audio input to analog stereo L/R RCA and 3.5mm audio signal output. Make sure to change the audio output format to PCM or LPCM. (NOTE: It is only a Digital to Analog Audio Converter, not an Analog to Digital Audio Adapter, input and output cannot be reversed.).
  • ♬【Support Multiple Sampling Rates】Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz and 96KHz.
  • 24-bit S/ PDIF Incoming Bit Stream on Left and Right Channels. Support speakers and headphones play simultaneously. Built-in interference immunity and no signal input squelch circuit, provides crystal clear electromagnetic noise-free transmission. (NOTE: Do not support 192kHz sample rate audio).
  • ♬【Easy to use & Simple Settings】Connect the optical or coaxial cable to the signal source and converter, and then connect the RCA or 3.5mm audio cable to the output device and converter. Please set the audio format to uncompressed 2-channel LPCM or PCM in your TV or other source devices. (Note: 5.1 channel is incompatible, please set the audio output to PCM or LPCM: Setting--Sound--Audio Format-PCM/LPCM).
  • ♬【Wide Compatibility】This DAC audio converter is compatible with devices with coaxial or toslink d....
Check Stock

NEWCARE 4K@60HZ HDMI 2.0b Audio Extractor, HDMI Audio Converter Adapter,HDMI to HDMI + Optical Toslink SPDIF + 3.5mm AUX Stereo Audio Out, Support HDMI ARC, HDCP 2.2, RGB 8:8:8,3D (Metal Black)

  • ★[Upgrade HDMI Audio Splitter Extractor]- One HDMI Input to one HDMI Output(Pass Mode), Toslink SPDIF (Optical) digital audio output(2.0CH/5.1CH Mode), and 3.5mm stereo audio output(2CH Mode), achieving the synchronization of audio signal separation, guarantees audio and video transmission with high-fidelity and lossless-This HDMI Audio Splitter Extractor comes with high speed HDMI cable..
  • ★[HDMI 2.0b Specification compliant]- Our HDMI 2.0b Audio Extractor supports up to 4Kx2K at 60Hz RGB4:4:4, Ultra HD/3D, HDR, ARC(Audio Return Channel).
  • Supports HDCP2.2 with 18Gbps bandwidth and 24/30/36 bit deep color.(Note: You must plug in the HDMI ARC port when starting the ARC function.).
  • ★[Three Audio EDID Settings]- There are Pass, 2.0CH and 5.1CH three kinds of audio mode options. 3.5mm audio output supports 2.0CH PCM LPCM stereo audio. Toslink SPDIF Output supports 2.0CH PCM, 5.1CH Dobly Digital, Dobly TrueHD, DTS-HD, DTS. (Note: Our Audio Extractor can’t decode these audio formats. If your Amplifier or soundbar can’t support these audio formats, there will no audio on your soundbar or amplifier, so please set audio format on HDMI Source to PCM/ LPCM audio format.).
  • ★[Wide Compatibility]- This 4k HDMI Audio Extractor is suitable for most devices w....
Check Stock

XLR Audio Mixer, Comica CVM-AX3 XLR 6.35mm 3.5mm Port Audio Mixer Preamplifier Support Mono/Stereo Dual System with Dual Gain Knob Control for DSLR Cameras, Camcorder

  • Support Real-time Monitoring: The CVM-AX3 audio mixer has a real-time monitoring jack on the audio mixer that allows you to listen the audio while recording.
  • Mono/Stereo Output Switch: Just adjust the button you can freely choose the audio output mode you need, Kindly Note: the Mono/Stereo can not be selected at the same time, positive and passive microphone all supported.
  • Dual Gain Knob Control: Built-in independently L & R output gain knob adjusting sensitivity of the Microphones to get an accordinate preamplifier effects.
  • Two Power Supply Modes: You can choose between 9V battery or 48V phantom power, via 48V phantom power(full load) up to 6 hours working time, the working time of 9V battery up to 40 hours.
  • Unique Design: The CVM-AX3 audio mixer is made of aluminum, 2 cold shoe slot on each side for attach microphones and transmitter&transceiver, it also featured 1/4" male and female socket attach to camera, camcorder, camera rigs, tripods.
Check Stock

Sharllen MFi Certified 30-Pin Male to 8-Pin Female Adapter Lightning to 30 Pin Docking Stations Connector Charger & Sync Converter Compatible iPhone 4 4S,iPad 2 3,iPod Touch White (No Audio)

  • [NOT Support Audio or Video]：Only support charging and Data transfer, Does NOT support Audio, Video, AUX.(Please note: It is only used for charging and data synchronization, audio and video output is not supported.）You can use it connect your Smartphones, Tablets, Cars, Sound-Docks and More. NOTE: FOR CHARGING ONLY, DOES NOT SUPPORT AUDIO OUTPUT..
  • [The Best Choice for You]: 8-pin female to 30-pin male adapter for chargers or docking stations. It supports and allows you to connect the latest 8-pin iPhone lightning cables to old devices, components or charging docks with 30-pin ports.Very suitable for charging old iPhones and iPads with new chargers and docking devices. Supports data synchronization with old devices.(NO AUDIO).
  • [Small And Portable]: This lightning to 30 pin converter allows you to connect devices with 8-pin connectors to many 30-pin accessories. And passed strict quality control standards testing. Portable mini size, easy to put in your bag or pocket, convenient for travel or indoor use.Better for using your original iphone charging cord to charge your 30pin devices..
  • [Good Customer Service]: If for any reason you are not completely satisfied with your purchase or you have any question,just contact us directly by clicking ‘Ask a....
Check Stock

Lightning to 30 Pin Adapter Charging Sync Connector with 8 Pin Male to 30 Pin Female Adapter for Select iPhone, iPad and iPod Models (White)

  • This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories. Support for audio output, USB audio, as well as syncing and charging. Video output not supported..
  • It Supports and above and lets you connect your latest devices to older devices, components or charging docks with ports. Good for charging newer iPhone and iPad from older chargers and Docking Stands..
  • PLUG AND PLAY: Lightning to 30-Pin Male to Female Charger Adapter Converter for devices.NOTE: FOR CHARGING AND SUPPORT AUDIO OUTPUT..
  • Compatible Device: iPhone 12 Pro Max/12 Pro/12 Mini/12/11 Pro Max/11 Pro/11/XS Max/XS/XR/X/8/8 Plus/7/7 Plus/6S/6S Plus/5/5S/SE and iPad Pro/Air/Mini and Pod Touch 5th gen, and Pod Nano 7th gen..
  • WHAT YOU GET: Lightning to 30 Pin Adapter with Audio.Our fan-favorite 18-month warranty and friendly customer service..
Check Stock

HiBy R5 Gen 2 Hi Res Audio Player Android Mp3 Mp4 Player with Class A Headphone Amplifier High Impedance Low Heat Generation Black

  • 【Entry-level Android DAP with Class A headphone amplifier】HiBy R5 gen 2 digital audio player with Class A headphone amplifier circuit supports DAC direct output and DAC+Class A discrete device two output modes. With discrete output stage design, THD is down at 0.0006% at the amplified output for unparalleled realism..
  • 【Dual DAC hi res audio player】R5 GEN 2 High Resolution audio player has built-in dual high-performance ES9219C DACs with native support for DSD256, PCM768kHz/32bit, 130dB signal-to-noise ratio, THD+N below -112dB. Dual independent crystal oscillators and FPGA clock algorithm provide high precision timing..
  • 【Everything just to bring good sound to you】This mp3 player uses 163 high-precision resistors, 19 tantalum POSCAPs, and 4 electrolytic capacitors maximally suppresses power supply ripple, yielding silky black backgrounds. Audio components, regardless of cost, naturally paved the way for premium sound..
  • 【Android HiBy OS】This audio and video player is an entry-level Hi Res sound quality Android DAP, which can be downloaded and installed third-party applications. combined with our self-developed professional music player system HiBy OS, which globally bypasses Android SRC for lossless music source output!.
Check Stock