Reviews Audio Input output

3.5mm Stereo To RCA Red White Audio Balun Extender Over Cat5

IN THE BOX: (1) 4 foot 2-Male to 2-Male RCA audio stereo subwoofer cable.
CRYSTAL CLEAR AUDIO: Enhances audio connections.
ideal for home-entertainment and high-fidelity (HiFi) systems.
RCA INPUT/OUTPUT: 2 RCA output (connect to either L or R input) and 2 RCA input.
input can be high frequency (digital audio) or low frequency (subwoofer).
GOLD PLATED CONNECTORS: Corrosion-resistant 24K gold-plated full-metal connectors.
RELIABLE PERFORMANCE: Eliminates unwanted noise/feedback for pure, clear audio.
minimal signal loss for reliably consistent audio.
COLOR-CODED COMPONENTS: Red/white color-marked connectors for quick, easy left-and-right hookups.

Frequency Response: 10Hz - 100KHz (+0dB, -3dB).
Input and Output Terminals: Analog Audio Input (1), Audio Output (1), Coaxial Digital Input (1), Headphone Output (1), Optical Digital Input (1),....
Accessories: power cord (1) Remote control: RM-ANU182 / S (1) Quick Start Guide (1) flyer (1) USB cable (1) Warranty (1) Reference Guide (1) Driver....

Frequency Response: 10Hz - 100KHz (+0dB, -3dB).
Input and Output Terminals: Analog Audio Input (1), Audio Output (1), Coaxial Digital Input (1), Headphone Output (1), Optical Digital Input (1),....
Accessories: power cord (1) Remote control: RM-ANU182 / S (1) Quick Start Guide (1) flyer (1) USB cable (1) Warranty (1) Reference Guide (1) Driver....

192kHz DAC converter prozor digital to analog Audio converter, converts coaxial or Toslink digital PCM Audio signals to analog L/R RCA and 3. 5mm jack Audio simultaneously (input and output cannot be reversed).
Supports volume adjustment headphone amplifier function.
Audio amplifier chip and volume adjusting switch. Allowing you to drive your headphone directly and adjust the output volume. A similar amp function provides better sound quality..
192kHz 24-bit sampling rate supports sampling rate at 32kHz, 44. 1kHz, 48kHz and 96kHz and 192 kHz.
24-bit SPDIF incoming bit stream on L/R channels, to eliminate noise when no signal input, and automatically mute while non-audio input signal..
Aluminum metal casing durable aluminum metal shell makes it heat-resisted and high quality.
It can easily install and operate. Powered by 5. 5mm USB power cable (power adapter is not included).
Don't use Other plugs, It can only use 5V 1a plug..
Gold-plated input & output gold Plated interface to reduce signal transmission loss. Input Audio connector: 1 x Toslink (included 1m 4. 0/OD slink cable), 1 x RCA (coaxial).
output audio connector: 2 x RCA/L), 1 x 3. 5mm jack..

Turn-by-turn GPS navigation of USA (powered by iGO primo 9.0) | complete integration of select Android enabled devices | Bluetooth V4.0 hands-free calling from enabled phone.
Playback from DVD & CD of MP3, 720P MP4 & other video | playback from 64GB USB of MP3, MP4 & other video | 2a 5V Adaptive fast charge of mobile devices (rear).
ID3 MP3 tag reading for track & artist information | rear audio/video input for personal media devices | front & rear RCA pre-amp audio outputs | subwoofer RCA audio pre-amp output.
Rear view Camera input w/ trigger | 300W 4Ch. Mosfet speaker outputs | custom backgrounds & screen savers | multi-region FM frequency stepping.
A2DP Wireless MP3 Audio Playback from Enabled Device | Built-in Front Panel Bluetooth Microphone Front 3.5mm AUX Audio Input.

RCA stereo audio switcher 2 IN 1 OUT or 1 IN 2 OUT.
Main functions: (1) select audio input between A and B with A/B siwtcher and get one output.
(2) select audio output between A and B to receive one input.
How to use:(1) connect two audio sources (like CD player / computer) to A/B ports and one audio output (like speakers) to IN/OUT port.
(2) connect one audio source to IN/OUT port and two audio outputs to A/B port.

【4K HDMI Audio Extractor】4K HDMI 2.0 Audio Extractor is a high performance 1 HDMI input and 1 HDMI output with audio Extract Function. The Audio can be output by 3.5mm Audio Jack, Toslink SPDIF, Coaxial, HDMI Audio Port. It allows user to use the existing audio Receiver to receive 4Kx2K@60Hz, HDCP 2.3 content audio. The product also supports HDMI loop out, as well as 10bits HDR(High Dynamic Range ) pass-through and eARC/ARC Function..
【Support ARC and eARC Function】Extract the Audio from TV to Soundbar or Amplifier. Connect your TV HDMI(ARC or eARC) Port to this Audio converter HDMI Output(ARC/eARC）Port with HDMI Cable, then connect Optical cable or HDMI Cable or Coaxial to Amplifier or SoundBar. (Please Note: eARC and ARC function is only available from the Optical SPDIF, Coaxial and HDMI Audio Port.) And When you select eARC function, Please make sure that your TV has power on eARC function and HDMI CEC function is also on..
【High HDMI Input Resolution】Support Up to 4K@60Hz RGB 8:8:8. Color Space: RGB 8:8:8, Ycbcr 4:4:4/ 4:2:2/ 4:2:0. Color Deep: 8-bit, 10 bit, 12 bit(1080p@60HZ).
8-bit (4kx2k@60Hz RGB 8: 8: 8/YUV 4: 4: 4) 8-bit, 10-bit, 12-bit(4Kx2K@60HZ Ycbcr 4:2:2/4:2:0)..
【Supported HDMI Audio Extract formats】HDMI Audio Formats: ....

2-IN-1-OUT Mini 3.5mm Audio selector designed for customers having several audio sources and outputs.
① Select audio input between 1 and 2 with 1/2 switcher and get one output.
② Select audio output between 1 and 2 to receive one input.
Won't affect sound quality.Note: Only one audio is output at a time (you can switch between two audios).

Converts the audio signal from TV ARC/ eARC source into digital audio output of Toslink (optical) and coaxial simultaneously. Simply Connect your TV HDMI ARC port to Input of the DA41 and connect your audio device to the Coaxial or Toslink..
Input: HDMI ARC/ eARC, Output: Toslink/SPDIF and Coaxial..
Supports PCM5.1 / LPCM 2.0 Channel, HDMI Input to Optical/Coaxial 5.1 Output Headphone Output.
Supports [email protected], [email protected], Power on/off switch, LED indicator. (NOTE: It will not work with Dolby AC3/ Dolby Digital Plus etc., Also please set the Audio Output to PCM or LPCM before Using).
1 x DA41 Audio Extractor, USB cable for Power, Manual. Comes with 1 Year Warranty. Troubleshooting - NOTE: When using the ARC function, the volume needs to be adjusted by your audio device. Make sure it is the HDMI ARC port of the connected TV and switch to the "on" state..