Reviews Atv Clutch Compression Tool

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.

Automatic Transmission ensures smooth shifting and lets the entry-level rider focus on the trail by eliminating a hand-operated clutch. The Reverse feature allows you to move your ATV backwards with ease without you having to get out of the ATV..
Electric Start provides much easier control and handling, and gives the rider the great convenience in the event of a stall..
Luggage Rack is on the front and rear of the ATV. This is a fantastic upgrade for carrying anything needed..
Some assembly required: Assembly for ATVs include Handle bar brackets, all 4 wheels, front and rear racks (if included), rear shock and battery. (May differ per model).

【Fitment】-Clutch removal tool only Compatible with 2016 2017 2018 2019 2020 Polaris RZR/RZR-4 XP Turbo & RS1, 2018 Polaris Ranger XP 1000 & 2019....
【 Flexible shaft】-RZR removal tool with flexible shaft and no-slip grip,which can be used within 90 degree bending range. The clutch cover removal....
【Reversible】-kemimoto RZR clutch cover removal tool with a reversible socket that fits 8 mm clutch cover screw heads and 1/4" hose clamp. The....
【Comfortable to use】-This clutch removal tool handle is designed according to ergonomic principles. Ensure the comfort of your hands during the....
【Durable】-Removal tool of RZR is made of aluminum alloy, which is lighter and will not rust compared to other tools made of steel, and can be used....

STURDY SOLID MATERIAL -- The clutch lock nut spanner is made of solid steel material, sturdy construction, durable in using.
DESIGNED FOR LOCK SPANNER KIT -- A special and perfect replace grom clutch removal tool for : Replace special tool: # 07716-0020100,....
IMPORTANT DATA FOR YOU TO CHECK -- Large End Inner Diameter: 24mm / 0.94 inch.
Large End Outer Diameter: 30mm / 1.18 inch.
COMES WITH 4 PIN LOCK NUT SPANNER -- 4-pin socket clutch nut tool, each end has 4 pegs.
One side is 20mm inner diameter and another side is 24mm inner....
FITMENT -- This clutch nut tool can be used for 14mm clutch lock nut on: crf50, xr200 1980-1984, xr200r 1984-1994, xr250l 1991-1994, xr250r 1986-1994,....

OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
Rugged construction will easily support the weight of heavy clutch discs.
To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 7.3 inches long.

REPLACe A/C CLUTCH ASSEMBLY: Use the ABN Air Compressor Clutch Rebuild Removal Tool Kit – AC Clutch Puller for Car Auto Air Conditioning to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors.
GM R4 and A6, HR-6, DA-6 and V A/C compressors.
sander compressors SD 505, 507, 575, 708, and 709.
Wide application of vehicles including GM, Ford, Chrysler, imports, and other makes and models.
Check vehicle owner’s manual for a list of compatible compressors.
EASY TO USE: Keep all threads clean and well-oiled.
Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
Resists rust and corrosion with proper care and lubrication.
2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (2....

Meets the needs for 4-Stroke, high-performance ATV, UTV and motorcycle applications.
Offers outstanding protection even in harsh conditions.
Wet clutch compatible formula prevents clutch slippage.
All season formula works across a broad range of temperatures.
Meets warranty specifications for Yamaha, Honda, Kawasaki and Suzuki.

Fan clutch service tool set includes 5x Fan clutch wrenches - 22mm, 36mm, 40mm, 47mm, 51mm.
Special fan clutch wrench tool kit is designed to remove and install fan clutches when repairing or replacing the water pump, timing chain or the fan clutch..
The pulley holder with 4 pairs of replacement pins is designed to trap and hold bolt on pulleys by the mouting bolts. It is suitable for most vehicles and newer Chrysler engines with press on pulleys requiring sprcial pins to hold housing..
This fan clutch tool Kit is made from forged steel for superior strength, black finish further improves corrosion resistance for lasting durability..
The fan clutch wrenches are compatible with Ford Trucks (2.8L, 2.9L, 3.0L, 4.0L, 1.9L engines), Dodge Trucks (3.9L, 5.2L, 5.9L, 8.0L, V10 engines), GM Trucks (4.3L, 5.0L, 5.7L engines), ect..

Throttle handle grips fits for most of 50cc 90cc 110cc 125cc 140cc 150cc 200cc & 250cc 4-stroke 7/8" ( 22mm) Bar ATV dirt bike.Compatible mini bike....
7/8" Universal brake clutch lever fit 50-1000cc ATV Dirt Bike Mini Bike Scooter,fits for Honda CRF SSR 125cc Coolster Roketa Baja X-Treme Pit Dirt....
Twist throttle accelerator handle made of high quality tubber material.Dirt Bike throttle cable length is 47 inch,The throttle assembly is easy to....
Package includes left hand grip,right hand grip,47 inch throttle cable,throttle housing clamp,brake clutch lever.The throttle cable assembly is easy....
Our services:If there is any issues about our throttle handle within 12 months, do not hesitate to contact us.We provide carefree return or issue you....