Reviews Attwood Automatic Bilge Pumps

LINGVUM Bilge Pump for Kayak Canoe and Boat - 17 Inch Manual Portable Kayak Hand Water Pumps with Reversible Hose Orange

CONVENIENT BILGE MANUAL WATER PUMP --- Our manual bilge pump length is 16.5", the maximum unfolded length is 25.5", equipped with a 23.2"long hose. At the same time, Our bilge pump has two water inlets and a long hose that attaches to either end, removing water quickly and reducing your fatigue.
MAKES WATER REMOVAL EASIER --- The maximum displacement is 0.4L each time. The premium rubber seal creates a watertight seal that won't come loose or leak allowing for the maximum amount of suction and discharge that performs better than other hand bilge pumps. Suction spacers can allow water to flow into the manual water pump at the fastest speed.
SCENE TO BE USED --- Perfect for emergency water removal in boats, kayaks, canoes or dinghies. With our kayak bilge pump, rest easy knowing that you’ll have a quick and easy way of removing water in those difficult times. Spending time on the water is supposed to be fun! Perfect boating and kayaking accessory.
LIGHTWEIGHT & PORTABLE --- This kayak hand pump is light (Only 0.78 pounds), easy to carry and store. Foam padded handgrip is non-slip and provides buoyanc....

⛵HAND BILGE PUMP FOR BOATS: Our manual bilge pump length is 17", and the maximum unfolded length is 28.3", which is easy to store and takes up minimal space. It’s the perfect boating accessory for kayaks, canoes, dinghys and small boats. Our bilge pump remove water quickly and downward strokes for maximum efficiency and less fatigue.
⛵MAKES WATER REMOVAL EASIER & FASTER: Our hand water pump features a 34.6" long hose with a 1.16" intake nozzle and 1.37" diameter hose that makes reaching the bottom of your boat easier and removing excess water faster. This hand suction pump works great to remove water from the bottom of a motorboat, canoe or dinghy.
⛵EASY TO USE: Just simply connect the hose to the end of the pump, insert the bottom of the pump into the water, and use the handle to start pumping. It sucks water when you push the handle in, and disperses the water when you pull the handle out!.
⛵NO CLOG FILTER & ANTI-LEAK DESIGN GASKET: Our marine bilge pump Features a filtered nozzle to prevent seaweed, leaves and debris from clogging this hand water pump. And The premium rubber sea....

Internal integrated float switch for AUTO ON/OFF functionality.
Pump body accepts both 3/4” and 1-1/8” screw-on outlets to allow ease of installation.
Each outlet has an O-ring for easy maneuverability without stripping.
Universal strainer base is connection compatible: fits Attwood Tsunami, Rule, Johnson/Mayfair cartridge pumps.
screw mounting holes match Rule and Attwood Tsunami.
Strainer base also includes side mounting option for tight spaces.

Suitable for operating running and anchor lights, bilge pumps, blowers, baitwell pumps and more.

Suitable for many general applications including operation of lights, bilge pumps, blowers and baitwell pumps.
Single pole, single throw off/on toggle switch.

Single pole, single throw on/off/on toggle switch is suitable for many general applications including operation of lights, bilge pumps, blowers and baitwell pumps.
Inclusive of a chrome plated brass handle, mounting stem and face nut.

Easy-to-install direct replacement for the motor cartridge of model T800 Tsunami aerator and bilge pumps.
Reliable, self-contained unit that locks securely into the pump.
Installs easily, fits properly, and delivers outstanding performance.
Intended for use in the T800 models of the Tsunami Aerator Pump, Tsunami Dual Outlet Aerator Pump, and Tsunami Bilge Pump.
12-volt Motor Cartridge installs with a 29-inch wire.

Easy-to-install direct replacement for the motor cartridge of model T800 Tsunami aerator and bilge pumps.
Reliable, self-contained unit that locks securely into the pump.
Installs easily, fits properly, and delivers outstanding performance.
Intended for use in the T500 models of the Tsunami Aerator Pump, Tsunami Dual Outlet Aerator Pump, and Tsunami Bilge Pump.
12-volt Motor Cartridge installs with a 29-inch wire.

The pump securely clips into the mounting base for easy installation and for removal to clean and inspect the pump.
The self-contained automatic switch will detect water and automatically turn the pump on, when the water is gone shut the pump off.
The automatic bilge pump is completely submersible with a water pumping capacity of 800 GPH.
The ¾” O.D. outlet hose barb is designed to be used with standard ¾” I.D. bilge hose.
It’s ignition protected, uses a very low 5 amps operating current the wires are tinned marine grade.