Reviews At Power Supply

Siglent Technologies SDG1062X Series Dual-Channel Function/Arbitrary Waveform generators

  • 【Specifications】Voltage Supply: 9-12V DC Input.
  • Input Distortion: less than 1% (at 1KHz).
  • 【welding steps】The welding installation considerations, follow these steps: First,the components are welding the front board, from low to high principles, namely the first low welding components, such as, capacitor, resistor, diode, etc.Then welding IC socket, terminal blocks, finally power socket, adjustable potentiometer..
  • 【Debugging steps】After completion of welding on IC, XR2206, you need to pay attention to the direction of IC, or insert the might damage the chip! Check IC for errors, if any, please correct in time..
  • 【Power】 Insert the power supply, power supply for 5.5 x 2.1 port, inside and outside is negative polarity.
  • Fitting for 9-12 v power supply voltage, and the waveform may not be stable for more than 12V..
  • 【Please note】these are DIY kits, you need to follow the welding steps in our description and complete the final installation..
Check Stock

1800w Mining Power Supply 8 GPU 1800W Modular PSU for Bitcoin Ethereum Miner 110V (100~264v) AC to DC Full 150A PSU GPU BTC ETH Graphics Video Card 2U

  • 【Professional Supply】This power supply is rated 1800 watts. single fan multi-channel power supply supports 8 high-end graphics cards.(Input Voltage of 110V.
  • 【Energy saving】The conversion rate is as high as 95% or more (while the conversion rate of passive PFC is often below 70%), which can reduce electricity bills. More energy saving! More environmentally friendly.
  • 【PFC】This power supply adopts an active PFC circuit, Compared with passive PFC, its input voltage can be from 100V to 264V, while ordinary passive PFC power supplies cannot work when the voltage is lower than 180V.
  • 【Over Voltage Protection】Perfect function for protecting Miners, when circut is malfunction or power supply has higher inside temperature, it will shut off automatically to protect antminer.
  • 【NOTICE 】Please note that because the power supply is running at high power, a high-speed cooling fan is equipped to effectively dissipate heat. The sound will be a bit loud during the power supply operation. Please don't worry, this is normal..
Check Stock

Sundown Audio SAE-2000D V.3 Monoblock 2000W RMS Digital Class D Amplifier SAEv3-2000D

  • Features: Monoblock Class D Amplifier. Power Handling: Maximum Output Power at 14.4V DC 1-Ohm: 3000W RMS | Maximum Output Power at 14.4V DC 2-Ohm: 2025W RMS | Maximum Output Power at 14.4V DC 4-Ohm: 1140W RMS. Input Sensitivity: 200MV, Signal-to-Noise Ratio: 86dB, Frequency Response: 10Hz-20kHz (-3dB)..
  • Crossover: High Pass Filter: 15 to 80Hz (-12dB/8) Variable | Low Pass Filter: 80Hz to Full (-12dB/8) Variable. Bass Boost: 0 to 12dB (50Hz), Thermal Management: Smart Cooler (Fan Powered by Temperature or Audio with 3 Speeds), Input Impedance: 56K-Ohms, Protection System: Output Short/High/Low Supply Voltage/Thermal Protection, Minimum Supply Voltage: 9V DC, Maximum Supply Voltage: 16V DC, Dimensions: TBA..
Check Stock

MyVolts 5V USB Power Cable Replacement for Zoom R24 Audio Interface

  • This myVolts 5V high-quality power cable is compatible with your Zoom R24 from any USB port.
  • Package Includes - 2 metre 5V USB power supply cable,.
  • Lifetime warranty - this myVolts power supply comes with a warranty covering up to the lifetime of your device, or 10 years - whichever is greater.Energy efficient - this power supply guarantees more efficient delivery of power to your devices, at less cost to you..
Check Stock

DC Power Supply Variable, 30V 10A Bench Power Supply with 4-Digits LED Display, USB Interface, Adjustable Regulated Switching Power Supply with Encoder Adjustment Knob, Output Enable/Disable Button

  • 【High-precision encoder knob】Different from general knobs, this DC power supply has a precise encoder knob. You can press the knob to switch each digit, and then turn the knob to customize each digit in the range of 0-9. Set the voltage or current you want more accurately..
  • 【Output Enable/Disable Button】In the process of using the bench power supply, Output button can prevent us from forgetting to turn off the output and causing damage to the load. Just press this button to turn on or turn off the output of the power supply. This makes it more convenient for you to use the power supply..
  • 【Overcurrent Protection】When the OCP function is turned on, if the load equipment is short-circuited during operation, the adjustable power supply will automatically stop output and send a buzzer to alert the user. Protect the adjustable power supply and load from damage..
  • 【Precise 4-digit LED Display】The variable power supply with a high-definition 4-digit display, which can display three values of voltage, current and power at the same time. The data is accurate to 0.01V and 0.001A. The bright white digital display helps you to operate as usual in the dark, and you can adjust the brightness of the screen as needed..
  • 【Compact and Lightweight】The meas....
Check Stock

MyVolts 5V USB Power Cable Replacement for Xiaomi Mi Android TV Box

  • This myVolts 5V high-quality power cable is compatible with your Xiaomi Mi from any USB port.
  • Package Includes - 2 metre 5V USB power supply cable,.
  • Lifetime warranty - this myVolts power supply comes with a warranty covering up to the lifetime of your device, or 10 years - whichever is greater.Energy efficient - this power supply guarantees more efficient delivery of power to your devices, at less cost to you..
Check Stock

IR Illuminator, 8-LED IR Illuminator 850nm, Long Range Infrared Light for Security Camera,Ohwoai Outdoor Ir Flood Light Wide Angle 90 Degree with 10ft 12V 2A Power Supply Night Vision

  • [90 Degree Wide Angle] 6pcs 1W 850nm high power infrared led lights, 90 degree flood spread view angle ,no light spot.Irradiation distance could up to 100ft.OHWOAI Long Range Ir Illuminator provide more clear view at dark night for your weak light surveillance equipment, like your wireless or Poe camera system..
  • [Automatically ON & OFF] Built-in with photocell sensor, the Ir illuminator automatically switch on at dusk and switch off at dawn, it’s energy saving style. Wave length 850nm Infrared light,energy-efficient, perfect for camera system..
  • [IP67 Waterproof] This infrared led light is designed with heavy duty aluminum case and reinforced glass window. IP67 level waterproof for outdoor and indoor use.Power supply: DC 12V/2A.(Included in the package).
  • [10ft 12V 2A Power Supply] The specially customized 12V2A power supply has more power than the 12V1A power supply. 10ft extra-long power cord, allowing you to use the IR Illuminator more conveniently..
  • [What You Get] 1x 8 Infrared Illuminator, 1x 12V 2A power adapter. Please install the infrared spotlight beside the camera and point the same direction as your camera. Please make sure that your camera is work with 850nm infrared led illuminator before buy..
Check Stock

YISTER WiFi Control ATS W2R Switch Mini 2 Phase Dual Power Automatic Transfer Switch 220V 240V Changeover Switch (2P 100 Amp NO Power Off) with 1Pack 6 Positions Screw Terminal Strip Blocks

  • The switch is mainly used for testing whether normal or spare power is normal or not.It can switch power supply in 0.03 seconds to build uninterruptible power supply..
  • When the normal power is abnormal, the spare power works at once, which therefore ensures the continuirty, reliability, and safety of power supply..
  • When the normal power supply is normal, it will automatically switch back from the backup power to the normal power supply..
  • Easy to use: quick to install on the rail?There are fasteners on the side in seamless connection and parallel connection.
  • Feature:junction box,wire branch box,meet all kinds of cable branches to improve work efficiency..
Check Stock

One Tattoo World Dual Digital LCD Tattoo Machine Power Supply | LCD Display | Stainless Steel Pedal & 2 Clip Cords | Red

  • DC POWER SUPPLY BOX: This power supply unit comes complete with 1 flat, stainless steel foot pedal, a blue LCD display to read out the voltage, 2 clip cords measuring 8’ to attach separate machines simultaneously, and 1 power cord. The red power supply box may work with rotary tattoo machines, tattoo guns, and other machines as well. This unit comes with all the parts you need to get tattooing..
  • PROFESSIONAL QUALITY: All of our tattooing tools are made with quality materials. We pride ourselves on creating professional-grade tattoo supplies for a fraction of the cost. With the help of this high-quality power supply machine, you’ll be able to create the tattoo you've always wanted from the comfort of your home. Our supplies will also work well in a professional tattooing establishment..
  • CONNECT LINER & SHADER MACHINES SIMULTANEOUSLY: This dual power supply unit allows the tattoo artist to connect liner and shader machines simultaneously, streamlining the tattooing process and providing effortless results. To switch from a liner to a shader, simply flip the switch on the lower left corner to divert the power to the desired device..
  • 110/220V CONVERSION SWITCH: The digital, ultra-bright LCD screen makes it incredibly easy to ready the voltage and provid....
Check Stock