Reviews Asus Mini Itx

JGINYUE H97 Mini ITX Motherboard, White LGA 1150 Motherboard Support Intel i5 i7/Xeon E3 (DDR3/M.2 NVME/M.2/VGA DP HDMI-Compatible/PCIe X16/SATA 6Gb/s/2 Gigabit Ethernet)

  • LGA 1150 Mini ITX Motherboard: Equipped with LGA1150 CPU socket, supporting Intel i5/i7 and Xeon E3 series processors..
  • Three image transmission interfaces: This mini itx gaming motherboard supports VGA, DP, and HDMI-compatible high-definition high-performance graphics and audio signal display, you will have more choices in configuration..
  • Dual M.2 slots: The Intel motherboard with M.2 NVME protocol (support NGFF) slot, transmission power up to 32Gbps. Can support M.2 NGFF card.
  • DDR3 dual-channel memory: The LGA 1150 computer motherboard supports dual-channel Non-ECC Unbuffered DDR3, 1600/1333Mhz effective frequency. The maximum memory capacity is 16G..
  • Stable power supply: 4-phase power supply CPU stable power supply, all solid-state capacitor design, equipped with 24+8 pin power interface, to ensure the stable operation of the motherboard..
Check Stock

Silverstone Tek Plastic/SECC Mini-ITX Computer Case with 2x USB 3.0 Front Ports SFF Cases Black SG05BB-LITE

  • Unprecedented 120mm fan in mini casing for positive pressure cooling.
  • Mini-DTX/Mini-ITX motherboard & SFX PSU compatible.
  • Standard-length expansion cards support (10 inches).
  • Elevated standoff for motherboard back side components.
Check Stock

Goodisory M06 SPCC 0.6mm Mini ITX Black Desktop Computer Chassis 2.5 Drive Bay with VESA Rack

  • Motherboard: only compatible with mini-itx (6.7" x 6.7").
Check Stock

KCMconmey 4 Bay DIY NAS Case, 4 x 2.5/3.5 Tray. Compatible ITX MB Flex PSU. with Front USB 3.0 12cm Chassis Fan Hot Swap Backplane. Network Attached Storage Enclosure.

  • [Support Mini ITX Motherboard] ITX Motherboard dimension 6.7*6.7in (17*17cm)..
  • [Support Flex Power Supply Unit] Flex PSU dimension 3.21*1.59*5.91in (81.5*40.5*150mm)..
  • [Support 1 Single Slot Full Height PCI-e Expansion Card] To add video card or network card or more..
  • [Come With 1 Front USB 3.0 or 2.0 Port] 2 in 1 cable only plug one connector to motherboard..
  • [Come With 1 12cm Replaceable Fan] Pre-installed 120*120*25mm chassis fan..
Check Stock

Thermaltake View 51 Motherboard Sync ARGB E-ATX Full Tower Gaming Computer Case with 2 200mm ARGB 5V Motherboard Sync RGB Fans + 140mm Black Rear Fan Pre-Installed CA-1Q6-00M1WN-00

  • [LIGHT UP THE SYSTEM] - 2 Pre-installed 200mm 5V Motherboard Sync ARGB fans plus ARGB light bar at front panel (Sync with Asus Gigabyte MSI ASRock Biostar that has 5V addressable RGB header).
  • [BUILT-IN DUAL MODE 5V ARGB SWITCH BOARD] - Control light via the I/O port button (27 LED modes/7 Colors) or via 5V ARGB Sync motherboard RBG software.
  • [27 LED MODES via I/O PORT] - Wave mode/ Flow mode/ RGB lighting (single color) / Radar mode (Red, yellow green Cyan blue White Purple) / Breath mode (8 Colors) / Full Lighted mode/ Single Color mode (7 Colors) / Light Off.
  • [PATENTED ROTATIONAL PCI-E 8 SLOTS DESIGN] - With patented rotational PCI-E slots you can choose the way you want to display graphic cards vertically or horizontally.
  • [SMART SPACE] – Sophisticated space design at the right side of the case provides a neat area for PSU placement and cable management.
  • [2 plus 2 DRIVE BAY] - 2 5"/3 5" x 2 with HDD Cage plus 2 5" x 2 with HDD Bracket.
  • Supports Mini ITX Micro ATX ATX E-ATX (up to 10 5") Motherboard.
  • I/O Port - Type C x 1 USB 3 0 x 2 USB 2 0 x 2 HD Audio x 1 RGB Switch x 1.
  • OUTSTANDING EXPANSION - Max CPU Cooler Height 175mm / Max VGA Length 300mm (With Reservoir) 440mm (Without Reservoir) / Max PSU Length 200mm.
  • DIMENSION - 21 65" x 12 4" x 20 67" 32 96 l....
Check Stock

Silverstone Tek Mini-ITX/DTX Plastic Front Panel Case with 2X USB 3.0 Front Ports for Motherboard SG05W-USB3.0 White

  • Ample space for CPU cooling (82mm in height).
  • Elevated standoff for motherboard back side components.
  • Unprecedented 120mm fan in mini casing for positive pressure cooling.
  • Mini-DTX / Mini-ITX motherboard & SFX PSU compatible.
Check Stock

IN WIN 350W TAC 2.0 MicroATX Mini Tower Case Z589.CH350TB3 Black

  • Expansion slots: 4x PCI-E expansion Slots.
  • Cooling system: 1x 80 or 90mm rear fan vent (fan not included).
  • Front I/O panel: 2x USB 3. 0 Ports, HD Audio.
Check Stock

Silverstone Tek SG05B-USB3.0 Mini-ITX/DTX Motherboard Plastic Front Panel Case with 2X USB3.0 Front Ports Cases Black

  • Ample space for CPU cooling (82mm in height).
  • Elevated standoff for motherboard back side components.
  • Unprecedented 120mm fan in mini casing for positive pressure cooling.
  • Support 2.5-Inch and 3.5-Inch hard drives.
  • Mini - DTX / Mini - ITX motherboard & SFX PSU compatible.
Check Stock

Supermicro Rack Mount Server Chassis CSE-505-203B,Black

  • 9 8"-Depth Mini 1U chassis support for maximum motherboard size - 6 75" x 6 75" Mini-ITX.
  • Drive Bays 1x 3 5" Internal Drive Bay (w/ 1x Half-height Half-length PCI Slot) or 2x 3 5" Internal Drive Bay or 2x 2 5" Internal Drive Bay (w/ 1x Full-height Half-length PCI Slot) or 4x 2 5" Internal Drive Bay.
  • Expansion Slots 1x PCI Slot (Full-height Half-length).
  • Power Supply 200W 80 PLUS Gold Certified Low Noise AC-DC Power Supply w/ PFC.
Check Stock