Reviews Asme A789

Sterling Seal & Supply SSS 9000.500316GR150X6 Spiral Wound Gasket, 1/2\ Pipe, Class 150 Flanges, 316SS Windings, Flexible Graphite for Applications with Thermal Cycling and Pressure Variations (Pack of 6)

  • ASME B16.20 Gaskets for ASME B16.5 Flanges / Class 150.
  • Centering ring accurately locates the gasket on the flange face, provides additional radial strength, and acts as a compression limiter.
  • Spiral winding (sealing element) consists of metal and soft filler material.
  • Temperature range (F) : -150 to 842 Degrees.
Check Stock

Sur-Seal, Inc. Teadit 90004304GR300 Yellow Band with Gray Stripe Spiral Wound Gasket, High Temperature (Thermal Cycling) and/or Pressure Variations, 4\ Pipe Size, 300# Class Flange, 304SS Windings with a Flexible Graphite Filler

  • ASME B16.20 Gaskets for ASME B16.5 Flanges/Class 300.
  • Centering ring accurately locates the gasket on the flange face, provides additional radial strength, and acts as a compression limiter.
  • Spiral winding (sealing element) consists of metal and soft filler material.
  • Temperature range (F) : -150 to 842 Degrees.
Check Stock

Harrington Mini Cat AH Pendant Model Air-Powered Hoist, Hook Mount, 1/4 Ton Capacity, 20' Lift, 29 fpm Max Lift Speed, 12\ Headroom, 0.9\ Hook Opening, 3/8\ NPT, 90 psi

  • Air-powered hoist with hook mount, pendant control for precise handling and remote operation, compact design with low headroom, and unlimited duty cycle for continuous operation in high-volume environments.
  • Spring-loaded, eight-vane motor with air feathering control to facilitate precise load handling and gentle load placement.
  • Average decibel rating of 80dBA for comfortable noise levels.
  • Aluminum valve section and nickel plated load chain for resistance to corrosion, abrasion, and wear.
  • Produced to comply with ASME B30.16 and ASME HST-5M standards.
Check Stock

Harrington TCR Cord Model Air-Powered Hoist, Hook Mount, 2 Ton Capacity, 10' Lift, 11 fpm Max Lift Speed, 21-13/16\ Headroom, 1.2\ Hook Opening, 1/2\ NPT, 90 psi

  • Air-powered hoist with hook mount, cord control that allows operator to stay within reach of the load, compact design with low headroom, and unlimited duty cycle for continuous operation in rugged or high-volume production environments.
  • Spring-loaded, eight-vane motor with air feathering control to facilitate precise load handling and gentle load placement.
  • Adjustable load limiter stops lift when load exceeds rated capacity for safety and to help avoid damage.
  • Average decibel rating of 80dBA for comfortable noise levels.
  • Produced to comply with ASME B30.16 and ASME HST-5M standards.
Check Stock

MAXPOWER Heavy Duty Adjustable Wrench 10 Inch, Adjustable Shifter Movable Spanner with Extra Large Jaw Capacity, Drop Forged Cr-V Steel, Chrome Finish, Metric/SAE

  • DURABLE CR-V STEEL – Drop-forged chrome vanadium alloy steel heat-treated for enhanced strength and long-lasting durability. Stands for long-term professional use..
  • CHROME PLATED FINISH – Provide a much more reliable and effective rust and corrosion protection..
  • EXTRA LARGE JAW CAPACITY – Nearly 20% larger than common ones, up to 34mm(1-3/8in) caliber, covers a wider application range. Clear metric/SAE scale is laser-etched and never fades..
  • SMOOTH ADJUSTMENT – Features with easy-to-turn thread knurls to adjust the jaw width, achieving an exact fit for fasteners or bolts with different sizes..
  • HIGH TORQUE – Maximum torque exceeds ASME standards by 30% (ASME: 507.15N.m, Ours: 659.29N.m). Used on both bolts and nuts with hexagonal or square heads..
Check Stock

MAXTOOL No.43 10pcs Identical Jobber Length Drills 0.089' HSS M35 Cobalt Twist Drill Bits Wire Gauge Numbered Golden Straight Drills; JBN35G10R43P10

  • Drills conform to ASME/ANSI B94.11M standards or USCTI - United States Cutting Tool Institute (formerly MCTI).
  • All drill dimensional & tolerances conform to ASME/ANSI B94.11M or USCTI - United States Cutting Tool Institute drill standards.
  • Fully ground process ensures excellent chips moving, and 135 deg chisel angle with split point provide accuracy start for quick penetration without Walking and less Logging.
  • Precision treatment makes drills durable toughness, withstands heavy duty operation, resists corrosion and lubricates the drill bits better for cutting smoothly.
  • Jobber Length Twist Drill Bits with Straight Shank for cutting metal, plastic, and wood etc.
Check Stock

Esnbia Shower Kit, Shower Faucet Set（Valve Included) with 6-Inch Rain Shower Head, Single-Handle Shower Trim Kit, Matte Black

  • IMPORTANT WARNING:Not compatible with other brand valve and cartridges.The old shower valve must be removed if install this kit..
  • 6-INCH HIGH PRESSURE RAIN SHOWER HEAD: Enjoy a waterfall like shower experience, with modern excellence in performance. offer consistent powerful shower even under low water pressure, that this will bring you an high water pressure..
  • CUPC CERTIFICATION PRESSURE BALANCE VALVE : Pressure balance valve cartridge, brass valve body, the flow of cold and hot water can be adjusted through the settings on the left and right sides. Designed for use with standard 1/2" U.S. plumbing connections. Products are in compliance with the following standard(s): ASME A112.18.1-2018/CSA B125.1-18 ASSE 1016/ASME A112.1016/CSA B125.16..
  • ANTI-CORROSION--Multi-layer Matte Black finished, this can resist daily scratches, corrosion and tarnishing in humid shower room.The elegant, one-piece curved handles complement any decor.
  • SHOWER PACKAGE INCLUDE: shower valve with valve trim, 6 inch rain shower head, 6" shower arm.
Check Stock

POP SANITARYWARE Shower Only Faucet Set Brushed Nickel, Bathroom Rain Mixer Shower Head Set Wall Mounted Rainfall Shower System Single Handle Shower Trim Kit with Rough-in Valve

  • LUXURY DESIGN: Swivel ball allows you to adjust the angle of the showerhead to suit your preference..
  • ALL METAL MATERIAL: Solid brass rough-in shower valve body, Stainless Steel shower head and brass ceiling mounted shower arm..
  • cUPC CERTIFIED: ASME A112.18.1-2018/CSA B125.1-18 with 1/2" NPT thread on both shower arm and valve body..
  • INCLUDES: 8" Stainless Steel shower head, shower arm, shower mixer valve. California CEC list (1.8GPM 6.8L/MIN). CUPC certification, Products are in compliance with the following standard(s): ASME A112.18.1-2018/CSA B125.1-18.
  • LIFETIME LIMITED WARRANTY: Any product quality problem can be guaranteed within 5 years. The shower cartridge is permanently replaced free of charge..
  • IMPORTANT WARNING: Not compatible with other brand‘s shower faucet valve and cartridge. The old shower valve must be removed if install this kit..
Check Stock

Esnbia Shower Kit, Shower Faucet Set（Valve Included) with 6-Inch Rain Shower Head and 4-Inch Linear Shower Drain, Matte Black

  • IMPORTANT WARNING:Not compatible with other brand valve and cartridges.The old shower valve must be removed if install this kit..
  • 6-INCH HIGH PRESSURE RAIN SHOWER HEAD: Enjoy a waterfall like shower experience, with modern excellence in performance. offer consistent powerful shower even under low water pressure, that this will bring you an high water pressure..
  • CUPC CERTIFICATION PRESSURE BALANCE VALVE : Pressure balance valve cartridge, brass valve body, the flow of cold and hot water can be adjusted through the settings on the left and right sides. Designed for use with standard 1/2" U.S. plumbing connections. Products are in compliance with the following standard(s): ASME A112.18.1-2018/CSA B125.1-18 ASSE 1016/ASME A112.1016/CSA B125.16..
  • The square shower drain cover adopts a grid design, greatly enhances the water flow..
  • This shower drain made of 304 stainless steel, Matte black finish works with any decorating style. Brushed gold finish works with any decorating style. Our square shower drain outlet easy to unload and installation, saving you money and time. It can also be used in kitchen, balconies, garage, basement etc..
Check Stock