Reviews Arduino Pro Mini Pins

M5stack M5StickC Plus ESP32-PICO-D4 Mini IoT Development Kit Deauther Watch Support BLE 4.2 and WiFi Big ger Screen IoT Controller for UIFlow and MicroPython and Arduino

[Practical link]: ★Video ★GitHub ★Arduino Library and ★CP210X driver installation tutorial: Please get the link from the following roduct guides and documents.
[Upgrade]: The improvements of StickC PLUS to StickC are a buzzer, bigger screen (1.14-inch, 135 * 240 resolution LCD Screen), add a G25 pin output, 120mAh battery and more stable hardware design..
[Mini but Powerful]: The M5 StickC PLUS supports UIFlow, MicroPython and Arduino. Its compact body is integrated with rich hardware resources, such as infrared, RTC, Microphone, LED, IMU, Buttons, PMU, etc..
[Parameter]: 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Blue tooth and 4MB flash memory..
[Notice]:Baud rate supported by M5 StickC Plus: 1200 ~115200, 250K, 500K, 750K, 1500K.
G36/G25 share the same port, when one of the pins is used, the other pin should be set as a floating input..

Tumbller is a newly design for Arduino project of robotic car kit which has multiple fascinating functions like IR control, auto-follow, obstacle....
Tumbller comes with a well-designed tutorial with illustrations, which shows you how to assemble the kit step by step and how to play with all the....
Arduino-Compatible: You can modify the default codes and upload your own program using Arduino IDE and work with the reserved pins to add more....
STEM kit for everyone: Tumbller is easy to assemble and suitable for kids to have some hands-on experiences and learn basic programming knowledge.....

download the driver of Nano V3.0 at: http://bit.ly/2jKlJMO.
Nano's got the breadboard-ability of the compatible for Board and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
The Nano is using the chips ATmega328P and CH340, not FT232 as official compatible for Arduino, so pls. use the driver from above link..
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..

1602 LCD Shield Module Display V3 for Arduino R3 MEGA2560 Nano DUE.
This is a 16x2 LCD Keypad module for Arduino Diecimila Duemilanove,MEGA1280, MEGA2560 board..
Blue Backlight with white words, adjustable backlighting.
4 Bit LCD Library,V3 design, pins out for easy connecting.
1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot.

*The Nano is using the chips ATmega328P and CH340, Replace FT232RL..
*It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
*Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
*The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
*Arduino Nano V3.0 ATMEGA328P Improved version with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers)..

Prototyping Shield Diy Kits. Great for building your own designed Arduino Uno sheilds..
You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard to quickly test circuit ideas without having to solder..
It's got extra connections for all of the Arduino MEGA 1280 / 2560 R1 R2 R3 pins, and it's got space to mount through-hole and surface mount integrated circuits..
The Prototyping Shield makes it easy for you to design custom circuits..
It's a convenient way to make your custom circuit and Arduino into a single module..

On-Board Micro-USB connector for programming.
Pay attention to : 1.When you open the for Arduino IDE software, could you please go to the tool and choose the board "for Arduino Leonardo".
2: The acceptable voltage range is 6 to 9 V..

The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.

...o be connected and provide the power supply.
Where to use: the voltage to 3.3V 800mA DC buck module is applicable for high-efficiency linear regulator published active power regulator battery charger active instrument.
Compatible with: the 3 pins AMS1117-3.3 voltage regulator mini power supply is compatible with Arduino MEGA2560, MSP430 development board, 3.3V low power consumption MCU, FPGA/CPLD PLD programmable logic systems, ARM7 ARM9 ARM11 STM32, etc..
Provide more safety: the AMS1117-3.3 800mA DC buck module features overheat shutdown circuit provides overload and over-temperature protection, no worry about safety and bring you more convenience.
Operating junction temperature range: -40 to 125°C, welding temperature (25 seconds): 265°C, storage temperature: - 65~150°C.