Reviews Arduino Motor Controller

Robot Car Crawler Tank Treads Tracks with Gear for Robot Tank DIY (Not includ Idler Wheels)

  • ...nk chassis has much more width wheel, so can easily pass these cases..
  • 【Necessary for This Car】: Robot technology is difficult. It covers robotic mechanics structure, software, electronic hardware. So, it is necessary to learn the robot for a long time. By using this car robot frame, you will learn the assemble, controller, and code program..
  • 【Code Programming】: When you get this car chassis, you should learn more to let the car move. E.g., you can use arduino controller board and many sensors to make some projects, like obstacle avoidance, tracing, automatic driving, AI learning..
  • 【Metal Panel】: This tank chassis is designed for the metal panel with 2 plastic track and 4 wheels. But the price is not valuable. It is very suitable for the student for the arduino/raspberry pie/microbit learning. In the manual, we just provide the referred arduino code with wifi, bluetooth control mode..
  • 【What You Get】: You will get a complete TP101 tank car chassis kit, which includes 1pcs * metal frame, 2pcs * plastic driven wheels, 2pcs * plastic driving wheels, and screw kit, together with a battery box case. If you have any problem, please don’t hesitate to contact us. We will reply you within 24h..
Check Stock

MMOBIEL Micro Servo Motor Kit MG995 55g 360° for RC Drone / Car / Airplane / Helicopter / Vehicles / Robots / Compatible with Arduino Projects and Raspberry Pi Incl. Screws and 4 Servo Arms

  • ... Parts Available and Put Together with Care. to give You the Best Experience in Controlling Your Remote Controlled Vehicle. Interface Type: Compatible with JR & FUTABA interface..
  • Servo Motor Specs: No Load Running Speed: 0.09±0.01 sec/60° Degree at 4.8V.
  • Stall Torque (4.8V): 152,76 oz/inch / 11kg/cm, Type: Analog Controller, Operating Voltage: 4.8V - 6.0V, Left & Right travelling Angle deviation: ≤ 6° Degree, Centering deviation:≤ 1° Degree, Maximal Angle 120° Degree Neutral position: 1500 μsec, Dead band width:7 μsec (microsecond), Rotating direction: Counter Clockwise (900→2100μsec), Pulse width range: 900→2100 μsec, Operating Temperature Range: 0℃～55℃elcius.
  • Compatibility: Compatible with Remote Control Drones, Helicopters, Cars, Boats, and all sorts of RC Toys and hobby projects. Can also be used with any type of Arduino project, Raspberry Pi, Futaba, JR, Sanwa and Hitec remote system..
  • Set Contains: 1x MG995 Micro Servo Motor 55G, 1x 3 Colored Cable (Brown / Yellow / Red) with a Futaba Connector Plug, 4x Servo Horn Steering Arms (Star, Arm, X, Wheel), 4x Stainless Steel Screws..
  • High quality product by MMOBIEL: Each part is tested before shipment. Item in Stock..
Check Stock

1.54 Inch E-Paper Screen Display Module Resolution 200x200 3.3v E-Ink Electronic Display with Embedded Controller SPI Interface Support Partial Refresh for Raspberry Pi/Arduino/Nucleo/Jetson Nano

  • This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh..
  • No backlight, keeps displaying last content for a long time even when power down.
  • Ultra low power consumption, basically power is only required for refreshing.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc..
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
Check Stock

ACEIRMC SG90 Servo Motor Micro Servo 9G Servo Motor for RC Robot Arm Helicopter Airplane Remote Control (5 Pcs) (5pcs)

  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on compatible for Arduino ,Raspberry Pi.
  • The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems..
  • SG90 Micro Servo Motor compatible for Mini Arduino Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable.
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Check Stock

8 String Guitar and Bass TABS Tablature Notebook: 110 Pages of 8-String Guitar Tab Manuscript Paper (Manuscript Paper for 8 String) or Guitarron

  • This sensor kit comes with 37 basic sensors and modules, which is good for learning basic knowledge about sensors. The main controller is Not Included..
  • It comes with detailed tutorials which include pictures and code and 37 projects, explained step by step. Note we provide arduino tutorials, without Raspberry Pi tutorials..
  • Each module has 3-4 pins broken out that make it easy to plug into a solderless breadboard or hook up to with DuPont wires. They are intended to be used with the Arduino platform, but can also be used with the Raspberry Pi platform as well..
  • Packed well in nice box, also each item packed well separately..
  • High quality kit for those beginners who are interested in programming. 100% compatible with Arduino R3, MEGA 2560, NANO, Raspberry pi and more..
Check Stock

Kiro&Seeu L293D DC Motor Drive Shield Stepper Motor Drive Shield Expansion Board Compatible with Arduino Duemilanove Raspberry Pi

  • This is a commonly used DC motor drive module, using a small current 293 chip DC motor driver chip..
  • Using this chip you can use DC motors and power supplies of up to 10 Volts, that some pretty big motors and the chip can supply a maximum current of 600mA per channel..
  • Tested compatible for Arduino Mega, Diecimila & Duemilanove..
  • 2 interface for 5V Servo connected to the Arduino's high-resolution dedicated timer - no jitter..
  • Multi-function, easy to operate, a strong driver library support and feature updates..
Check Stock

REXQualis Super Starter Kit Based on Arduino UNO R3 and Electronics Component Fun Kit

  • The most economical kit comes with everything compatible with Arduino to starting programming for beginners ..
  • Include High Quality Base Board base on Arduino UNO R3 compatible with Arduino IED and Sensors, Servo, Motor, ULN2003 driver board, lcds, etc..
  • This is the upgraded starter kits come with a 9V 1A Power Adapter (At least $5.99 on amazon) to replace a 9V Battery , and the Lcd1602 module come with pin header(not need to be soldered by yourself)..
  • REXQualis Electronics Component Fun Kit is a Highest Cost Components Kit, It comes with more than 400pcs sensors and components for fun and simple electronic projects..
  • Free PDF Tutorial and Datasheet are available to download from our official website or you can contact our customer service..
Check Stock

MQ-2 MQ-3 MQ-4 MQ-5 MQ-6 MQ-7 MQ-8 MQ-9 MQ-135 Each of Them 1pcs Total 9pcs Sensor for arduino kit

  • This sensor kit comes with 37 basic sensors and modules, which is good for learning basic knowledge about sensors. The main controller is Not Included..
  • It comes with detailed tutorials which include pictures and code and 37 projects, explained step by step. Note we provide arduino tutorials, without Raspberry Pi tutorials..
  • Each module has 3-4 pins broken out that make it easy to plug into a solderless breadboard or hook up to with DuPont wires. They are intended to be used with the Arduino platform, but can also be used with the Raspberry Pi platform as well..
  • Packed well in nice box, also each item packed well separately..
  • High quality kit for those beginners who are interested in programming. 100% compatible with Arduino R3, MEGA 2560, NANO, Raspberry pi and more..
Check Stock

SZDoit Premium Robot Tracked Tank Car Chassis Starter Kit with DC Motor, Robotic Caterpillar Moving Crawler Platform Track for Arduion Raspberry Pie Microbit Python DIY Maker Remote Control RC Toy

  • ...nk chassis has much more width wheel, so can easily pass these cases..
  • 【Necessary for This Car】: Robot technology is difficult. It covers robotic mechanics structure, software, electronic hardware. So, it is necessary to learn the robot for a long time. By using this car robot frame, you will learn the assemble, controller, and code program..
  • 【Code Programming】: When you get this car chassis, you should learn more to let the car move. E.g., you can use arduino controller board and many sensors to make some projects, like obstacle avoidance, tracing, automatic driving, AI learning..
  • 【Metal Panel】: This tank chassis is designed for the metal panel with 2 plastic track and 4 wheels. But the price is not valuable. It is very suitable for the student for the arduino/raspberry pie/microbit learning. In the manual, we just provide the referred arduino code with wifi, bluetooth control mode..
  • 【What You Get】: You will get a complete TP101 tank car chassis kit, which includes 1pcs * metal frame, 2pcs * plastic driven wheels, 2pcs * plastic driving wheels, and screw kit, together with a battery box case. If you have any problem, please don’t hesitate to contact us. We will reply you within 24h..
Check Stock