Reviews Arduino Connector

Gowoops 9V 1A Power Adapter (UL Listed) for Breadboard NES Guitar Pedal Effects

A light weight, 0.8mm thick PCB, with on board LiPo-battery charging and a Qwiic connector.
Dual row of ground connections make it easy to add lots of buttons, LEDs, and anything that requires its own GND connection.
Fully compatible with the SparkFun's compatible with Arduino core and can be programmed easily under the Arduino IDE platform.
With 1MB flash and 384k RAM you'll have plenty of room for your sketches..
The Artemis module runs at 48MHz with a 96MHz turbo mode available and compatible with Bluetooth to boot. FCC/IC/CE Certified 8/16/2019 (ID Number 2ASW8-ART3MIS).

Add a sturdy and reliable color display to your Circuit Playground projects.
1.54" 240x240 IPS display with backlight control, two 3-pin STEMMA connectors and a Class D audio amplifier with a Molex PicoBlade connector.

6600 MAH CAPACITY- 3.7V battery- Provide power for Raspberry Pi and Arduino systems, as well as many other products.
BUILT-IN OVER/UNDER CURRENT PROTECTION CIRCUIT- Automatic protection from low voltage drain or overcharging damage (2.75V cut-off).
10cm (3.9 INCH) BATTERY CONNECTOR CABLE- Provides placement flexibility, along with a genuine JST 2-Pin connector.
DIMENSIONS and WEIGHT- 65mm L x 54mm H x 18mm D, 150g = 2.55 inch L x 2.125 inch H x 0.70 inch D, 5.29 oz.

[Program Learning]: You will quickly learning the robot project program leaning, arduino project..
[Big Load]: This wheel set can have 5kg load, and the wheel diameter size is 97mm..
[DIY RoS]: Install the frame, together with motor, then you can quickly DIY robot mecanum wheel robot car chassis..
[Plastic Material]: This wheel is preminum plastic, but the coupling used to connect motor is metal..
[What You Get]: This macanum wheel kit includes 2 pcs left wheel + 2 pcs right wheel + 4 pcs 6mm coupling motor connector..

Package includes: 1 x 4xAA Battery Holder Case.
The connector is paired with the barrel jack on Arduino to supply power to your device, power supply to LED lamp power supply, etc., and you can also go to DIY for more play.
5 inch cable termination standard 5.5x2.1mm center positive barrel jack connector.

★ What You Get: This set including 360pcs single row connector 1/2/3/4/5/6/7/8/9/10 and 90pcs double row 2/3/4/5/6/7/8/9/10 connector housing,....
★ Durable Material: The crimp pin connector is made of durable plastic and metal, tin plating, inset pure copper to increase the conductivity, the....
★ Useful Cable: Come with a 10ft/3m 10 wire color coded wire, easy to connect and identified, perfect for insulation displacement connectors (IDC)..
★ Easy to Operation: This set of connector is easy to install, you can just put the crimps in the tool and press them, make the crimp the insulation....
★ Wide Application: These connectors are compatible with Arduino and breadboard style pin connectors and sockets, like 3d printer boards, dupont....

ATmega328 microcontroller with Optiboot (UNO) Bootloader. Rev3 shield compatible..
Program with a USB Micro-B cable using the Arduino IDE platform: Plug in the board, select “Arduino UNO” and you’re ready to upload code.
Hardware peripherals you know and love: 20 Digital I/O pins with 6 PWM pins, 6 Analog Inputs, UART, SPI and external interrupts.
Broken out the SDA, SCL and IOREF pins, so it will be compatible with future shields Power over USB or through the barrel jack 7 to 15VDC.
The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong..

AA battery holder with 9V snap connector is designed for 4-slot 1.5V AA standard or rechargeable batteries.
4 AA Battery Holder Body Size: 6 x 3 x 3cm /2.36" x 1.18 " x 1.18 "(L*W*H).
Battery holder is made of ABS plastic with nickel plated springs, holding the batteries tight in place.
Great for Arduino boards micro-controllers, led projects, toys, also replaces broken battery holders for many electronic devices.
Package Contents: 2x 4 AA Battery Holder.
Besmelody 18-month warranty and friendly customer service..