Reviews Arc Portable Machine

hynade CNC Blow Back Digital Air Plasma Cutter, Non-HF Pilot Arc Non-Touch Plasma Cutting Machine, THC Torch Height Control Enabled (CUT60DN)

  • ..., the pilot arc will not reliable if the voltage lower than 100V.
  • Plasma cutter cutting thickness: Max Cutting Thickness 25mm@55A 220V 70PSI, Clean cutting thickness 20mm@55A 220V 70PSI, 12mm Clean Cutting thickness under 110V 60PSI. 63A power break, 45L/min Air compressor is suggested.
  • 2T/4T Function :Plasma cutting machine CUT60DN with 2T/4T function, also with Air/Cut Function, 2T 4T easy let the user operate machine and it is great help for the CNC cutting table. THC torch height control enabled. machine with function for torch protection, The LED light up if the torch connecting is not well, It will also lighting up while replacing the torch consumables,machine is not able to work while it lighting up.
  • CNC Plasma Cutting Machine : have 2 pins and 4 pins connecting port at rear of machine. 2 pins connector for The arc voltage output ratio 1:1, 4 pins connector for Signal Control.Easy works with CNC cutting table.The plasma cutter with Non-HF Pilot Arc function (Not HF Pilot Arc) Under this function, Pilot arc will not interference to machine( HF Pilot Arc will interference to machine).
  • Suitable Material:This plasma cutter suitable cut 20mm standard mild steel, 16mm stainless steel, 16mm Alloy steel, 4mm copper, 8mm Aluminum. All the cutting thickness....
Check Stock

165Amps Mig Welder, Dual Voltage Mig Welding Machine, Mig/Stick/MMA/Lift TIG Welder Machine, Gas Gasless Flux Wire Core Welder (MTS-165D)

  • [Multiple welding mode]: MTS165D adopts dual-voltage(110/220V) design, which can automatically read and indicate after power-on. Using IGBT inverter technology, it has high output efficiency, good dynamic performance and good load adaptability. The welding machine is an integrated design welding machine for Stick/MMA/ARC Welding/Lift TIG/2T/4T..
  • [Synergic Function]: One intelligence control system automatic compensate and adjust current/voltage.10 levels precise adjustment from -5V to +5V, Coordinate control mig wire feeder’s speed and current, which makes the machine easy to heat arc and instantaneous Increase the current convenient for striking the arc..
  • [Smooth Arc]: This MIG welding machine can work in conjunction with hot arc and arc forces and achieve smooth arc. Internal pre - set splash less and anti - adhesion, makeing a better arc starting effect. Very friendly for green hand and DIY users..
  • [Automatic Protection Function]: Automatic voltage and current control, built-in energy-saving fan automatically regulates the temperature and prevents overheating and dust enter.VRD against electric shock design makes welding workers safer..
  • [Easy to Use]：Friendly operation interface, front panel detailed identification with precise digital display. Fr....
Check Stock

SIMDER MIG Welder 140Amp 110V 220v Dual Voltage MIG Welding Machine Gasless Flux Core Welder IGBT Inverter MIG ARC 2 in 1 Wire Welder

  • 【Upgraded MIG-140M】We re-designed our MIG-140 and this MIG-140M MIG welder is more compact, weighs only 11LBS, Which is a better partner for outdoor working. Advanced IGBT&Inverter make this MIG welder a portable and efficient welding tool..
  • 【Improved Quality Control】This is a MIG/ARC 2 in 1 Welding machine. 140Amp DC 110V/220V Dual Voltage MIG welder. We have improved the performance on both MIG mode and ARC mode by precisely tested, to provide better experience to our customer..
  • 【Larger Wiring Space】We also expanded the interior space of the MIG Welder for setting up the wire feed unit. It will be easier to change the feeding wire or the feeding wheel..
  • 【Multi-Application MIG Welder】This Wire Feed MIG Welder is suitable for welding iron, carbon, steel and etc. Great choice for household welding, or DIY project on steel. This Flux Core Welder fits .030"(0.8mm) &. 035" (1.0mm) flux core wire. ARC mode fits rods: E7018, E6013, E6011..
  • 【What’s more】SIMDER is a professional welding machine manufacturer, we aim to provide a better welding tool and make welding easier. If you have any questions, feel free to contact us..
Check Stock

Amico ARC-160 Professional 160-Amp Stick Arc Lift-TIG Welding Machine 80% Duty Cycle 100-250V Wide Voltage Welder

  • ARC-160 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010,....
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the....
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 160 amps ensures....
  • ARC-160 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust....
  • ARC-160 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
  • the strength of its components makes it a....
Check Stock

Mophorn MIG Welder 200 Amp 3 in 1 220V DC MIG/TIG/Arc Welding Machine Portable TIG Welder with IGBT Inverter and Digital Display Lift ARC Welder w/MIG Welder Torch and Cable

  • Advanced IGBT Technology: Our MIG-200 adopts the most advanced IGBT inverter technology with excellent arc stability. Suitable for welding carbon....
  • Convenient Flux Cored Wire: This mig tig stick welder can use 0.024"&0.031"&0.039" flux-cored welding wire and solid welding wire. It can handle 2.2....
  • Easy Control Panel & 3 In 1: MIG welding machine has MIG MMA TIG mode. The welding machine has knobs to support different current adjustment needs,....
  • Safety & Overheat Protection: The arc welding machine has a built-in protection device, and the engine will automatically shut down when overheated....
  • Compact and Portable: Lightweight 18.5 pounds, with a comfortable handle, easy to install and store. Ideal for outdoor repairs, rusty metal, farm and....
Check Stock

Amico ARC-200, 5-200 Amp Stick Arc Lift-TIG Combo Welder, 100-250V Wide Voltage Welding, 80% Duty Cycle, Compatible with all Electrodes: E6010 E6011 E6013 E7014 E7018 etc.

  • ARC-200 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010, E6011, E6013, E7014, E7018, etc. The machine has an excellent Lift-TIG arc welding function.
  • 5-200A comfortably welds thin stainless steel and other various metals..
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs..
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length..
  • ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection..
Check Stock

WETOLS Stick Welder, 110V/220V Real 160Amp MMA ARC Welder Machine, IGBT Inverter Digital Display LCD MMA Welding Machine with Hot Start Arc, Efficient for 3/32''-1/8'' Welding Rod

  • ...iron, obviously increasing the welding frequency, and energy optimization result is remarkable. Voltage accurately matches and adjusts the current to ensure a stable current output, prevents overload conditions, and the multiple processing protection mechanism improves welding efficiency and ensures your safety..
  • 【Portable Design】WETOLS Arc welding machine features a easy-carrying handle, compact light weight body, and protective corner case design. The lightness and strength of its components make this welding machine a reliable welding tool for professionals or DIY use, no matter for your work indoors or outdoors..
  • 【12-Month Waranty】Each WETOLS stick welder machine undergoes strict inspection before leaving the factory to ensure it performs to the exceptionally high standard we set! Every semiconductor, attachment, cable, electronics board, and all spare parts are thoroughly examined and tested for strong durability. If you have any problem about our welder, please feel free to contact us, we will answer it within 24 hours..
Check Stock

Reboot Plasma Cutter IGBT Inverter 40 Amps RBC-4000 AC 110V Air 1/2 Cutting Plasma Cutting High Frequency Duty Cycle for Aluminum Stainless Mild Steel Copper Iron Chrome-Blue

  • Pilot Arc Function,Plasma cutter pilot arc 50Amps with pilot arc function,Very easy to cut Rust/Dust/painted metal. It is made of high quality....
  • Pilot arc Plasma Cutting machine 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 240v, 18mm max cutting thickness, 12mm quality cutting....
  • Machine with current display, Also with air post time adjust function, the adjustment range is 2-15 seconds ,this function allow user adjust the time....
  • Accessories come with machine, 4M Pilot arc AG60P cutting torch, Earth clamp with 2.5M cable, 5 pcs tips, 5 pcs electrodes, 2 meters air hose, 4 pcs....
  • Two years warranty for this machine, the buyer can get free service within two years if machine have any problems.
Check Stock

Amico ARC-200 200-Amp Stick Arc & Lift-TIG Combo Welder 100-250V Wide Voltage 80% Duty Cycle Compatible with all Electrodes E6010 E6011 E6013 E7014 E7018 etc.

  • ARC-200 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010,....
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the....
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures....
  • ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust....
  • ARC-200 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
  • the strength of its components makes it a....
Check Stock