Reviews Arbor For Diamond Hole Saws

Delta Diamond Kick-Asphalt 8 Inch Diamond Blade, Segmented, Wet/Dry Cutting Asphalt, Green Concete, Masonry Block, and Similar Materials (8\)

  • PREMIUM DIAMOND BLADE - Kick-Asphalt uses premium diamond segments and is designed to cut asphalt, green concrete (poured within 72 hours), masonry block, and similar abrasive materials..
  • 10MM SEGMENTS - 10MM tall diamond segments maximize cutting life and provide a low cost per cut..
  • DEEP U GULLETS - This unique segment/keyslot design allows for better air cooling and chip deflection resulting in better performance..
  • SPECIFICATIONS - 8" diameter X .090 thick with a diamond-7/8" arbor. Also included is a 5/8" bushing. Fits most hand-held angle grinders and circular saws. Heat-treated high-speed steel core is guaranteed to withstand the demands of dry cutting. Expected blade life is approximately 4,000 inch feet (one inch foot = 12" length X 1" depth). The recommended operating speed is 4,500 rpm..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charg....
Check Stock

6 Inch Dish Resin Diamond Grinding Facing Wheel/Circle Saw Grinding Wheel,240 Grit for Carbide Circle Saws,1 Pack

  • 【Usage】The Resin Diamond Grinding Facing Wheel with thin rim is greatly used for face sharpening carbide teeth of circle saws blade..
  • Could run on bench grinder or table saw..
  • Resin Diamond is more durable than single diamond.Besides,this quality material is high temperature resistant..
  • 240 Grit, R100 Concentration for a super fine finish.
  • Dimension:6" diameter (D) x 3/8" thick (T) x 1-1/4" Arbor Hole (H).1/4" width (W) and 1/16" depth (X) of diamond.
Check Stock

KHCRAFT Bi-Metal Hole Saw Kit High Speed Steel M42 with Cobalt 8% for Metal and Wood 13-Piece General Purpose 3/4

  • ...th metal but not high strength one) because HSS M42 contains cobalt 8%, which raises the hardness of the teeth. HSS M42 is about 20% more durable than HSS M3..
  • 9-piece hole saws: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm).
  • 4-piece accessories: arbor 9/16"-1-3/16" with shank 3/8".
  • arbor center drill with shank 1/4". Center drills in this kit are all made of real HSS M2 and fully ground, while a lot of bi-metal hole saw kits are with low grade HSS center drills roll-forged..
  • with max cutting depth 1-3/8" (35mm) and ideal for drilling on sheet metal (even high strength metal because of HSS M42 with cobalt 8% teeth), wood, plastic, plasterboard, Aluminium, etc.. Particularly for sheet metal: the cutting depth is 2mm to 5mm, depends on the hardness of the metal and taking hand drill or machine drill.
  • HSS bi-metal hole saws are much better than and totally different from any carbon steel ones (work on wood only, no metal)..
  • Packed in high quality carrying case. Please note that it shows "HSS M3" on the carrying case but actually it is made of HSS M42 with cobalt 8%. You could see it on the hole saws.DescriptionHSS ....
Check Stock

Delta Diamond Mad Dog HS 7 Inch Segmented Diamond Saw Blade, .095 X DM-7/8\-5/8\ Arbor, Premium, Wet/Dry, Laser-Welded, General Purpose Cutting Concrete, Masonry, Stone (7\)

  • PREMIUM LASER-WELDED SEGMENTS - Premium, long lasting, and durable diamond segments are laser-welded for added strength..
  • WET OR DRY - Use dry or wet on cured concrete, masonry, brick, block, roofing tile, stone, pavers, slate, terrazzo, and similar materials..
  • HEAVY DUTY GENERAL PURPOSE - Great for harder materials or when you want a blade that lasts. Mad Dog HS Premium blades last longer and cut faster than standard blades..
  • SPECIFICATIONS - 7" diameter X .095 thick with a Diamond Knockout-7/8" arbor. Preinstalled 5/8" bushing for adapting to other circular saws and grinders. The maximum safe operating speed is 8,730 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Delta Diamond Mad Dog HS 9 Inch Segmented Diamond Saw Blade, .095 X DM-7/8\-5/8\ Arbor, Premium, Wet/Dry, Laser-Welded, General Purpose Cutting Concrete, Masonry, Stone (9\)

  • PREMIUM LASER-WELDED SEGMENTS - Premium, long lasting, and durable diamond segments are laser-welded for added strength..
  • WET OR DRY - Use dry or wet on cured concrete, masonry, brick, block, roofing tile, stone, pavers, slate, terrazzo, and similar materials..
  • HEAVY DUTY GENERAL PURPOSE - Great for harder materials or when you want a blade that lasts. Mad Dog HS Premium blades last longer and cut faster than standard blades..
  • SPECIFICATIONS - 9" diameter X .095 thick with a Diamond Knockout-7/8" arbor. Preinstalled 5/8" bushing for adapting to other circular saws and grinders. The maximum safe operating speed is 6,700 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

LENOX Tools Hole Saw Arbor with 4-1/4-Inch Drill Bit (1779772)

  • LENOX hole saw arbor extension is fast and easy to engage and disengage.
  • No tools are needed, helping prevent the hole saw from locking on the arbor.
  • LENOX hole saw arbor threads directly into virtually all hole saws.
Check Stock

Delta Diamond Extreme 7 Inch Metal Cutting Diamond Blade, Heavy-Duty All Purpose Cut Off Wheel for Rebar, Steel, Sheet Metal, Angle Iron, Stainless Steel, & More, 7/8\-DM-5/8\ Arbor (7\)

  • HEAVY-DUTY VACUUM BRAZED DIAMONDS - Diamonds are permanently bonded to the heat-treated hi-speed steel core by our advanced vacuum brazing process to create the strongest bond possible in even the most demanding conditions and is extremely resistant to heat. Use for cutting and grinding metal such as rebar, copper, galvanized steel, conduit, angle iron, ductile iron, stainless steel, and more. Will also cut through plastic, PVC, drywall, concrete, granite, and more..
  • LASTS 100X LONGER - A single Diamond Extreme blade outlasts and out performs up to 100 abrasive cut-off wheels. Save time by using one blade without having to constantly put on a new disc after a few cuts. Diamond Extreme blades use a heavy-duty vacuum brazed diamond bonded segment and will not wear out as fast as other diamond discs..
  • CONSTANT CUTTING DEPTH & SAFER - Abrasive discs wear down and will shrink which can be dangerous. Diamond Extreme maintains a constant cutting depth, giving you the maximum cutting depth throughout the life of the blade. The steel core makes the blade much safer to use and produces far fewer sparks and dust..
  • SPECIFICATIONS - 7" diameter X .110 thick with a 7/8"-DM arbor for Skil Saws. Included preinstalled 5/8" bushing for adapting to other circular saw....
Check Stock

Delta Diamond Cost Cutter 7 Inch Segmented Diamond Blade, DM-7/8\-5/8\ Arbor, General Purpose Cutting/Grinding Concrete, Masonry, Stone, & Similar Materials (7\)

  • STANDARD GRADE - Standard grade diamonds deliver the best combination of cutting speed and tool life at a low cost per cut..
  • GENERAL PURPOSE - Use on a wide variety of materials such as concrete, masonry, brick, block, stone, and similar materials..
  • USE WET OR DRY - Heat-treated high-speed steel core is durable enough to withstand dry cuts. Use with water for increased performance..
  • SPECIFICATIONS - 7" diameter X .090 thick with a Diamond-Knockout / 7/8" arbor hole. Included is a 5/8" bushing for adapting to any hand-held grinder, circular saw, or trim saw. The maximum safe operating speed is 8,730 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock

Delta Diamond Cost Cutter 6 Inch Segmented Diamond Blade, 7/8\-5/8\ Arbor, General Purpose Cutting/Grinding Concrete, Masonry, Stone, & Similar Materials (6\)

  • STANDARD GRADE - Standard grade diamonds deliver the best combination of cutting speed and tool life at a low cost per cut..
  • GENERAL PURPOSE - Use on a wide variety of materials such as concrete, masonry, brick, block, stone, and similar materials..
  • USE WET OR DRY - Heat-treated high-speed steel core is durable enough to withstand dry cuts. Use with water for increased performance..
  • SPECIFICATIONS - 6" diameter X .080 thick with a 7/8" arbor hole. Included is a 5/8" bushing for adapting to any hand-held grinder or trim saw. The maximum safe operating speed is 10,185 RPM..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..
Check Stock