Reviews Angle Iron Bending Machine

Torpedo Level, Magnetic Conduit Level with 4 Vials, V-Groove and Magnet Track, Aluminum Alloy Construction, High Viz Black (6 inch)

  • Easy-to-read high-visibility bubbles at 4 angles: level, 90, 45, and 30 degrees.
  • Thumb screw attaches level to conduit to measure angle while bending.
  • magnetic digital level made in Heavvy duty aluminum alloy frame ensures accuracy and durability.
  • Featuring a strong holding magnetic side, perfect for steel construction work and conveniently attaches to iron pipes, conduits or any other iron surface.
  • Torpedo Level has portable size, it's convenient storage and transport. easily put into your tool belt or pocke.
Check Stock

Sand Blaster Abrasive Blaster Portable Power Sand Blasting Kit for Removing Paint, Stain, Rust, Compatible Pressure Sand Blaster (Blue)

  • IDEAL SURFACE TREATMENT: The pressure sandblasting can perfectly handle the surface of large workpiece, suitable for the high density surface treatment requirements.operating pressure can be achieved 125 psi.
  • STURDY WELDED STEEL TANK: Sturdy welded steel tank, highly efficient and durable. the powder coating can resist rust and corrosion, this sand blaster is unlikely to be deformed and damaged，98 " long hose with check valve，more flexible.
  • GAS-WATER SEPARATOR: Gas-water separator can keep the drying of sandblasting in the barrel and meet higher requirements of sandblasting,Since wet sand tends to clog,our sand blaster can make sure the the compressed air stays dry to prevent clogging.
  • QUICKLY REMOVE: Pressutized design 30% more sandblasting power than siphon units ,this sand blaster is designed for outdoor large jobs, can remove rust from outdoor iron frames, statues and other immovable objects, remove car paint and marble inscriptions, etc.
  • RUBBER WHEEL AND HANDLE DESIGN: Equipped with handle is bending Angle in line with human comfort design and two 6" rubber wheels that allow easy movement of the machine while working.
Check Stock

Bewinner Water Cooling Bending Kit, 3pcs 12mm OD 45/90/180 Degree Acrylic Hard Tube Bending Tool Set,Rigid Tubing for Computer Water Cooling System

  • Hard Tube/Acrylic Tube Bending Tool Set. AWGM3 series ABS multi-angle acrylic elbow dies, each set of three. ThisTube Bending Kit is suitable for computer water cooling system, allowing your DIY computer cooling system to be more beautiful and neat..
  • Fits for 12mm rigid pipe. The tube bending kit is suitable for 12mm support tube outer diameter, 12mm acrylic tube hot bending auxiliary angle positioning..
  • 45/90/180 curvature. The kit consists of elbow dies with different angles of 45, 90 and 180 degrees. You can choose different angles according to your needs to meet your diverse needs..
  • High strength ABS material. The angle of the positioning groove is accurate, and the mold is highly polished to ensure the best contact between the finished product and the mold. Bending kits require enough heat to bend (like a heat gun)..
  • 【QUALITY SERVICE】If the product has any quality problems or you have any questions about this product, you can contact us at any time,we have a 24-hour online professional customer service team.we will try our best to solve your problem in time,please rest assured to buy..
Check Stock

KAKA Industrial 3 IN 1 Sheet Metal Shear 30-Inch Combination Sheet Metal Brake Cut Slip Roll Machine 3-IN-1/30 Segments Press Brake Shear Roll Machine

  • ...PACITY AND 30 INCH WIDE BED WIDTH ENSURES SMOOTH WORK FLOW. This 3-IN-1 sheet metal machine has the capacity up to 20 gauges mild steel and 16 gauge aluminum in widths up to 30-inches wide. It is a perfect combination machine for sheet metal machine to the length of 30" and thickness of 1/25" cutting stop. The roll bending starting with diameter of 1 1/2" also guarantees enough capacity.
  • ADJUSTABLE FINGERS ENSURES FLEXIBILITY AND PRECISION. The vertical press brake portion of the shear brake roll machine has a maximum bend angle of 90 degrees with adjustable fingers on the top beam to easily assist with making any size boxes. The slip roll portion has three wire grooves, and can form rolls down to 1-35/64-inches in diameter. Both feature guarantees adjustability and high accuracy.
  • VERSATILITY AND EASY ALIGNMENT. This 30” brake shear roll can be utilized to cut multiple materials. The shear can be used for mild steel, aluminum, brass, copper, lead, plastic and zinc. The 3-in-1 sheet metal brakes, sheet metal shears and slip roll machine has detailed manuals and a short video is also available on YouTube to give specific instruction on how to resemble it effortlessly.
  • SOLID CONSTRUCTION AND LONG TERM INVESTMENT. This 3-IN-1 brake shear roll has a heavy ....
Check Stock

Benchmark Abrasives 6-1/2\ 48 Tooth Tungsten Carbide Tips Saw Blade for Thin Steel and Ferrous Metals Max. RPM 4600

  • Benchmark Abrasives blades have been designed to maximize performance on thin/mild steel and other ferrous metals..
  • Material applications include square tube, angle iron, thin steel plate, pipe, tube, rebar, flat stock and other ferrous metals..
  • Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts..
  • Tungsten carbide teeth(TCT) provide excellent wear and heat resistance. Tougher tungsten carbide teeth stays sharper and have longer life..
  • The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood..
Check Stock

Aifanss Plate Stand for Display, 3 Pack 4.5\ Metal Picture Stand Decorative Iron Plate Holder Display Stands for Photo Frame Easel Artwork Book Tablet, Black

  • Premium Quality, Sturdy Construction - The plate holder display stand is made from top-quality solid metal iron which ensures a long service life. It can support weight up to 11 lbs. Compared with other cheap plate display stands, ours will not deform or fall apart even after long-term use. Aifanss picture stand with sturdy structure is able to hold your items without bending backward or slipping around..
  • Perfect Tilt Angle, Exquisite Design - The plate stand has tilt angle that is nice viewing angle for showing object. Its legs and base are sturdy enough to keep the items from dropping down. The decorative plate stand wont tip over. Matte black coated painting will never chip off and keep display stand rustproof. The smooth coating and rounded corner design protect your favorite items and avoid the tabletop from being scratched..
  • Perfect Size Meet Display Needs - The dimension of our plate holder is very reasonable, length 4.72.
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock

IDEAL Electrical 74-028 Ductile Iron Bender – Conduit Metal Pipe Bender w/handle for 1 in. EMT Pipes, Benders

  • Conduit Bender: ideally used to bend iron and metal pipes, the iron conduit bender offers application in electrical repairs and installation to fit pipes around all ceiling, corners, wall, and irregularly shaped passages.
  • Precision Bending: the metal pipe bender is equipped with markings that represent star, arrow, degree scale, and rim notch to get perfect bends. The markings are raised and cast into both sides to aid visibility of the users.
  • Durable Construction: made with ductile iron, the rugged construction of iron bender head offers durability to withstand long-term heavy-duty use. Baked-on blue enamel finish of the handle resists corrosion and other abrasive factors.
  • Convenient Usage: the grooved internal hook surface of the ductile pipe bender prevents slippage while applying extra force in use to avoid accidents. The heat-treated sturdy stress points allow the users to get accurate bends with ease.
  • Product Specifications: The Ductile EMT bender is suitable to bend 1 in. EMT metal pipes as well as 3/4 in. Rigid & 3/4 in. IMC pipes. It uses industrial standard Benfield b....
Check Stock

Spoon Ring Bender, Ring Bending Tool, Spoon Ring Making Machine Tool Kit for Jewelry Spoon Rings Press DIY

  • QUALITY - Our ring bending tool is made of quality steel, and the white ones in this ring making kit are nylon dies, used for softer materials that might scratch or dent..
  • DESIGN - The ring maker machine includes 9 sizes of bending posts of metal, and reusable negative bend pieces of metal and nylon for each post size. This is a multi-functional ring making tool, it works simple and easy to change the dies..
  • DURABLE - Our ring bending machine is sturdy and durable, works for bending silverware and making rings and jewelry, the thickness of the flatware will be the only limiting factor..
  • SIMPLE - It's simple to set the spoon ring maker machine up, and it's fun and easy to make spoon rings with our ring bender machine, for both beginners and practitioners..
  • SERVICE - If you have any questions about our ring bending kit, please feel free to contact us for solutions..
Check Stock