Arbor Mandrel Adaptor Motor Shaft Coupler Sleeve for Angle Grinder,Drill Converted into Cutting Machine Accessories

  • Angle grinder converted into cutting machine arbor mandrel adaptor accessories.
  • It is suitable for cutting disc, saw blade, polishing tool which inner diameter.
  • This sleeve, installed on the grinding mill can be sanding disc polishing grinding, can also be installed 16MM or 20MM aperture of the slice,....
  • Size: please check the detail illustration.
Check Stock

BLEKOO 4PC Angle Grinder Wood Carving Disc Set, for 4" or 4 1/2" Angle Grinder with 5/8" Arbor, Wood Shaper Carving Disc for Angle Grinder Attachments, Stump Grinder Teeth, Wood Shaping Tools

  • 【Material and Life】The blekoo angle grinder disc is made of high quality carbon steel, high hardness, high compressive strength, good wear resistance, polishing and grinding with less effort, each sharp tooth is very sharp, not easy to break or deformation, high hardness, high safety and long life..
  • 【Multiple Applications】 The wood grinding forming disc is a universal accessory for angle grinders. It has a wide range of applications and is suitable for any wood products. It can be used for grinding, trimming, carving, root carving, polishing, etc. It has very good wear resistance and can bring you great work efficiency, more importantly, it will not cause arm soreness..
  • 【What you will get】Four different woodworking discs, from rough sanding to detailed sanding can be solved in one go, no need to buy additional sanding discs, to help you solve all your problems.
  • 【Suitable for Most Angle Grinders】The outer diameter is 4 inches and the Arbor is 7/8 inches. 3 piece of silver bushing(7/8" to 5/8"), The shaping wheel is suitable for all 4 inches or 4-1/2 inches angle grinders on the market..
Check Stock

PEGATEC 40 Grit Flap Discs 4 1/2 inch Flap Wheel Type 29 Flap Sanding Disc with 7/8 Arbor Aluminum Oxide Abrasives for Grinding, Blending, Sanding and Finishing - 10 Packs

  • ...the grinding process, the temperature of general flap discs is too high, it is easy to burn the metal and make the metal discolor, which will reduce the hardness and toughness of the metal. The patented ratio of PEGATEC flap disc enhances heat dissipation and avoids thermal burns.
  • Multi-Purpose Sanding Discs - Angle grinder flap disc is designed to grind various materials,can be used for metal or wood processing,concrete grinding or finishing,stone smoothing or finishing,rust removal,welding mixing,deburring or deburring,etc. suitable for angle grinders with 7/8 spindles..
Check Stock

RIKON 2"x72" Knife Belt Sander/Buffer | Excellent for a wide variety of applications including sanding, grinding and making knives with 1 HP Motor and Adjustable Sanding Belt Arm

  • HIGH POWER: The 1.5 HP copper wire induction motor is more powerful and professional than most woodworking machine, providing a belt speed of 1836 feet per minute and a disc speed of 3450 rotations per minute, graphite board ensure the sanding belt smooth running, extend the service life.
  • WITH STURDY STAND: The steel stand keeps sanding surfaces elevated over the ground, and the stand is equipped with wheels and handles for easy movement, the heavy-duty body design provides enough weight to prevent walking and vibration during use.
  • CONVENIENT DESIGN: The tension quick release lever helps you switch and replace sandpaper grits as needed without wasting time. Dust port allows a dust-free operation when connecting with a dust collector. Graphite board ensures the sanding belt running smoothly and extends its service life.
  • MULTI-ANGLE SANDING: The sanding belt can tilt from 0 to 90 degrees for horizontal and vertical sanding to meet your different projects, the spacious sanding disc worktable can be adjusted from 0 to 60 degrees to meet your different angle needs.
Check Stock

BUCKTOOL Professional Bench Belt Sander for Metal 4 in. x 36 in. Belt and 8 in. Disc Sander with 1HP Direct-drive Motor, BD4802

  • BENCH BELT SANDER FOR METAL&WOOD: The sanding disc and belt paper is professional for metal polishing, and the sanding disc paper is hook and loop design for easy replacing, the aluminum sanding belt dust outlet can prevent melting, with the knife grinding accessories can be installed on the belt plate and it can be removed when not in use.This machine can be also proceed with wood working.
  • INCREASE EFFICIENCY: The 1HP direct drive motor is more powerful and professional design than the woodworking machine BD4603&BD4801, the motor direct drive design is 25% more efficient than the traditional design, it can maximize the development of 1 HP fully enclosed induction motor, providing quiet but powerful performance.
  • MORE CONVENIENT DESIGN: The switch box is placed on the top of the machine, making the operation more convenient, the belt tension is adjustable, the sturdy cast aluminum base with rubber foot prevents vibrations, the dust port can be removed and enlarge work area which is convenient for polishing long materials.
  • MULTI-ANGLE SANDING: The sanding belt work table can tilt from 0 to 90 degrees for horizontal and vertical sanding to meet your project, and the driven drum allows for sanding curved work-pieces, it has a quick sanding belt replace....
Check Stock

Strip Disc Stripping Wheel for Angle Grinders Rust Remover Disc Remove Rust Paint Oxidation - Paint Stripping Wheel, Disc Stripping Wheel, Paint Stripping Disk 4\ x 5/8\ 10 Pack

  • ◼️【TOP-LEVEL MATERIAL-Stripping Discs Angle Grinder】: The angle grinder paint stripping wheel, Rust Stripping Wheel is made of high-strength wear-resistant fiber mesh as the base material, wear-resistant materials, long service life and the resin elastomer and diamond sand are organically combined with a special process..
  • ◼️【WIDELY APPLICABLE】: Rust remover wheel, brand new 10-piece set, specially designed for 4" and 5/8" spindle marking of various angle grinders on the market. Easy to strip discs clean & remove paint, rust and oxidation. The purple paint stripping wheel has better hardness than the black strip wheel grinder..
  • ◼️【STRIPPER DISC--PREMIUM PERFORMANCE】: Grinder stripping disc is suitable for various shapes to be peeled off by the grinding body, It does not damage the surface of the object, has uniform grinding force, dirt will not block the grinding surface. Strip wheel grinder wear resistance, strong water resistance, strong plasticity, and good softness..
  • ◼️【BEST MATCH SIZE--STRIP DISC】: Size of the angle grinder rust remover disc: Diameter 4.
Check Stock

80 Pack 5 inch Sanding Discs Kit 8 Hole Sander for Drill Polishing Pad Hook and Loop Plate 60 80 120 180 240 400 600 800 Grit Sandpaper Abrasive Tool

  • Mixed-GRIT PACK: 80pcs 60 80 100 120 180 240 400 600 800 grit 5 inch sanding discs, assortment pack from rough to fine satisfying your most sanding and polishing requirements, suitable for random orbital sander and electric drill,angle grinder.
  • ALUMINUM OXIDE SANDPAPER: Sanding pad features good abrasion resistance, anti-static and anti-clogging, ideal for grinding and finishing on metal and non-metal, wood, rubber, leather, plastic, stone, glass and other materials.
  • Good at Polishing Grinding: Open-coat produces an even and consistent scratch pattern, special stearate coating offers better surface finishes, and perfect cleaning and polishing effects.
  • HOOK and LOOP BACKING: Strong and long lasting, easy to install and remove.
  • 1/4 inch hex shank sanding disc fits all the electric drill.
Check Stock

Wood Carving Disc,12 Teeth Wood Polishing Shaping Disc,6 Teeth Wood Turbo Carving Disc,4-1/2 Circular Saw Wood Carving Blades for Woodworking Sanding Carving Shaping Polishing Grinding

  • Package Contains:1 piece of 6 teeth wood turbo carving disc,1 piece of 22 teeth grinder chain disc,1 piece of carving disc for angle grinder,1 piece of 12 teeth wood polishing shaping disc,a convenient combination to meet your carving and shaping needs..
  • Quality Material: The angle grinder disc and grinder chain disc are made of tungsten carbide, durable and sturdy, rust and wears resistant,not easy to break or deform,The 12 teeth wood shaping disc is made of manganese steel, and the 6 teeth wood turbo curve carving disc is made of quality carbide, which makes the tool more durable, abrasion resistant, and have anti-blocking function, can be applied for a long time..
  • Efficient and Practical:The wood grinding wheel featuring hundreds of pointed teeth has the function of rapid removal of waste materials,which is more durable than sandpaper pads and save your time and energy while improving the efficiency of your work,as well as rapid shaping function which exerts obvious effects on the concave and convex areas,providing a nice curve cut..
  • Efficient and Practical:The wood grinding wheel featuring hundreds of pointed teeth has the function of rapid removal of waste materials,which is more durable than sandpaper pads and save your time and energy while impro....
Check Stock

Coceca 20pcs Flap Disc 4-1/2 Inch for Angle Grinder, Grinding Wheels and Sanding Discs, Type 27 Aluminum Oxide Abrasive Grinding Disc (40 60 80 120 Grit)

  • Size: Diameter is 4-1/2“, Arbor is 7/8”, the flap disc is standard size and suitable for most air and electric grinders..
  • Specification: Type #27, the grinder sanding discs are better for smoothing and blending surfaces. Maximum speed 13300 revolutions per minute (RPM), the wheels perform well..
  • Package contains: 40/60/80/120 grit angle grinder sanding discs, 10 x 40 grit, 5 x 60 grit, 3 x 80 grit, 2 x 120 grit, the combination better matches your requirement..
  • Fiberglass backing: Fiberglass backing plate absorbs vibrations and reduces smear during use. It provides durability and reinforcement..
  • Application: These grinding discs are effective for smoothing, blending, finishing surfaces or contours. It is available for paint, stainless steel, wood, plastics, ferrous and non-ferrous metals. The abrasive wheels fit for DEWALT DCG414B, DWE402, Bosch 1375A, Makita 9557PBX1, Black & Decker BDEG400, G950 and PORTER-CABLE PC60TAG, PCE810 etc..
Check Stock