Reviews Angle Gage

ChgImposs Imper Screw Thread Pitch Gauge, 55 Degree Cutting Gauge Tool with Blades Range 4-62G

  • It is 55 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Measuring Range: 4G, 4 1/2G, 5G, 6G, 7G, 8G, 9G, 10G, 11G, 12G, 13G, 14G, 16G, 18G, 19G, 20G, 22G, 24G, 25G, 26G, 28G, 30G, 32G, 36G, 40G, 48G, 60G, 62G.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • It was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

MC-1-M .061-.250\ by .001\ Minus Tolerance Pin Gage Set - 190 Gages

  • Gage increments are in .001" steps Minus tolerance: +0/-.0002". Fully hardened to 60-62 RC. Each gage is inspected and has a 10 Micron finish or better. Complete with plastic, element-proof fitted case..
Check Stock

ChgImposs Metric Screw Pitch Gauge，60 Degree Cutting Gauge Tool Stainless Steel Thread Gauge with 0.25-6.0 Blades Range

  • It is 60 Degree Thread / Screw Pitch Gauge gage with lock up device. Typically used to check the thread size determination is correct.
  • Measuring Range: 0.25, 0.3, 0.35, 0.4, 0.45, 0.5, 0.6, 0.7, 0.75, 0.8, 0.9, 1.0, 1.25, 1.5, 1.75, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0.
  • It is useful to check the tool angle when cutting threads on a metal lathe.
  • Check the angle on the thread cutting tool on the V-groove of the gauge.
  • All 24pcs blades was made by stainless steel, with wire drawing on the surface, not easy to rust. Ensure the accuracy of measurement.
Check Stock

SD STUDIO DESIGNS 2 Piece Comet Craft Table | Angle Adjustable Top and Stool | Black/White

  • Made with durable heavy gage steel construction that includes six floor levelers for stability.
  • Product dimensions – 23.75” D x 50” W x 29.5” H | Full tilt – 44.25” H | Top dimensions – 23.75” D x 36” W | Weight – 56.2 lbs..
  • Top Angle Adjustment from Flat to 40 Degrees.
Check Stock

Forster Products Sammi Dimensioned Headspace Gage, Rimless, Hardened Steel, Precision Ground, 350 Legend, NO-GO

  • 350 LEGEND: Use to check headspace of 350 Legend..
  • RIMLESS CARTRIDGE HEADSPACE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. Headspace in a rimless cartridge is the distance between the bolt face and a datum line, determined by SAAMI, where the front of the cartridge rests on its shoulder when the bolt is closed..
  • NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement. If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace.
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
  • MEASURING MEANINGFUL HEADSPACE: Properly speaking, and for safety purposes, one measures “headspace” as the difference betwee....
Check Stock

SD STUDIO DESIGNS 2 Piece Comet Craft Table | Angle Adjustable Top and Stool | Blue/Spatter Gray

  • Made with durable heavy gage steel construction that includes six floor levelers for stability.
  • Product dimensions – 23.75” D x 50” W x 29.5” H | Full tilt – 44.25” H | Top dimensions – 23.75” D x 36” W | Weight – 56.2 lbs..
  • Top Angle Adjustment from Flat to 40 Degrees.
Check Stock

SD STUDIO DESIGNS 2 Piece Comet Craft Table | Angle Adjustable Top and Stool | Purple/Spatter Gray

  • Made with durable heavy gage steel construction that includes six floor levelers for stability.
  • Product dimensions – 23.75” D x 50” W x 29.5” H | Full tilt – 44.25” H | Top dimensions – 23.75” D x 36” W | Weight – 56.2 lbs..
  • Top Angle Adjustment from Flat to 40 Degrees.
Check Stock

Forster Products 223 Remington NOGO Headspace Gage

  • NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement. If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace..
Check Stock

Telescoping Gauge Gage Set Tools 6 Pcs 5/16'' - 6'' Range Micrometer Precision T-Bore Hole Gauge

  • Multispecification measurement range, 6 piece Telescoping Gage Set, can detect hole (or slot) ID 5/16 "-6"（8mm-150mm）.
  • Telescoping Gage Set INCLUBE:A - 8 To 12.7 mm 5/16 "To 1/2".
  • The Telescoping Gage Set is a stainless steel material that prevents rust and extends the life of the Telescoping Gage Set, a satin chrome plated surface that includes the case, contact points of hardened tool steel, Telescoping spring, with a knurled locking knob and a knurled holding area..
  • Easy-to-adjust to allow the most pinhole gauge on the retractable gauge to enter, groove and groove up to 6 inches deep..
Check Stock