Reviews Aluminum Thread

Ridgid 47760 Universal Die Head 1/4-3/8 NPT HS

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.....
Check Stock

20Pcs Thread Inserts Protector,Male Female Reducing Nut Repairing Tools with Steel Wire for Improve Thread Strength,M12 x 1.75(2D)

  • 【Repairing the threaded hole】You can repaire the threaded hole in a cost‑effective manner.Repairing the threaded hole in a cost‑effective manner when a thread error occurs or a damaged female threaded hole is repaired,used for frequent disassembly, it can greatly improve the life of thread..
  • 【Convenient convertion】Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves.The product works for convert between metric and inch thread holes, which is convenient and fast..
  • 【Standard female thread 】The repair nut is an industrial fastening part, which is mostly used with screws or polts.If you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials,will forming a high‑strength, wear‑resistant, high‑accuracy standard female thread..
  • 【Stainless steel】The thread inserts has standard size, clear thread, more accurate repairing thread movable teeth, adopts 304 stainless steel material, high hardness, good toughness and wear resistance, good corrosion resistance, and is not easy to break when repairing thread hole..
  • 【Customer support】We attach importance to the feedback from every customer and always provide excellent customer service..
Check Stock

50pcs Helical Threaded Inserts Stainless Steel Coiled Wire Helical Screw Thread Inserts M8 x 1.25 x 1.5D Length

  • WIDELY USED:Stainless steel thread inserts used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
  • USED FOR PARTS:Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread..
  • A CERTAIN ELASTICITY:Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resista.
  • ADVANTAGE :It can prevent screw from getting loose, especially used for products requiring high coefficient of insurance..
  • EASY TO MAINTENANCE:Easy to maintenance, install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
Check Stock

20 Thumb Nuts 1/4-20 x 1 Inch Wide Knurled Plastic Head Thumb Nuts - Made in USA

  • Twenty (20) 1/4-20 Thread x 1 inch Wide Thumb Nuts.
  • 1 Inch Plastic Knurled Head / Aluminum Thread.
  • Use for connecting Thumb Screws / bolts that are 1/4-20 thread.
Check Stock

M3 X 0.5 HSG D6 THREAD FORMING BOTTOM TAP HSS

  • Used with some cutting fluid or keep it wet when tapping, the tap will last longer..
  • Thread Forming Tap is suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron..
Check Stock

Gurlleu Universal Paintball Tank CO2 CGA320 Adapter to 88g Cartridge Capsule Threaded Converter

  • Inner thread: Same as the 88g, 90g CO2 bottle. Outer thread: CGA-320 / G1/2-14..
  • Made of hard aluminum alloy, surface oxidation treated, durable and anti-corrosion..
  • With this adapter, you can attach a CO2 regulator with CGA320 thread to a paintball CO2 pin valve cylinder. Male CGA 320 thread fits the regulator..
  • Built-in pressure relief hole for safety when removing the adapter from the air tanks..
  • It is very easy to install, there is no high installation skill required..
Check Stock

E-Z LOK 319-4 Insert 1/4-20 Int. Coarse Thd., 3/8-16 Ext. Thd., .375 Lg., Thinwall, Steel

  • Important Parameters: Size: M6(inner diameter) x 1.0(installed pitch) x 3D(installed length=3*6mm=18mm), outer diameter: 7.6mm(Min.).
  • 7.9mm(Max.), suitable drill bit diameter is 6.3mm..
  • Function: Steel thread inserts used in low strength materials such as aluminum, magnesium, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition..
  • Easy to Maintenance: Install a thread insert into a damage screw hole, then the screw hole can be used as normal, in order to avoid workpiece loss..
  • Excellent Performance: Because of a certain elasticity, thread insert can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue resistance..
  • Usage Scenario: These threaded inserts are Used for parts that requires frequent removing, it can greatly improve service life and wear-resistance of screw thread. It can prevent screw from getting loose,especially used for products requiring high coefficient of insurance..
Check Stock

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • [Create Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
Check Stock

Dorman 610-558 9/16-18 Serrated Wheel Stud - .65 In. Knurl, 2.5 In. Length Compatible with Select Dodge / Ram Models, 10 Pack

  • COMPATIBLE WITH Toyota Tacoma Models Equipped with M12 x 1.5 Factory Studs..
  • CONTENTS: (12x) M12 x 1.5 Thread High-Strength Spec Spline Type Extended Wheel Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: M12 x 1.5 Thread / 0.561" Knurl / 0.333" Shoulder / 2.374" Length. *Front or Rear fitment. Two sets need to be purchased to replace studs on all 4 wheels. Please verify fitment compatibility prior to ordering..
  • BENEFITS: High-Grade 3/4" longer than factory studs designed to facilitate proper installation of aftermarket wheels & tires and/or wheel spacers..
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet Aluminum with anodized surface and rust & water-resistant polymer thread inserts to prevent rust, corrosion, and chemical damage..
Check Stock