Supplying Demand SW-ALCU5.5 5 Rod Pack Aluminum to Copper or Brass 8 Inch Brazing Rods Appliance Refrigeration HVAC
- Solution temperature during heat treating must be below the solidus of the braze alloy in order to ensure integrity of the joint is maintained..
- Joining all brazable grades of aluminum and copper.
- Aluminum to Aluminum or Aluminum to Copper wire pigtail splices.
- Aluminum to Copper, Aluminum to Brass or plated terminals.
- HVAC applications with Brass, Copper, Aluminum and Steel. Is effective with any of these heat sources: Oxy-acetylene torch, Natural gas torch, MAPP Gas, Induction..
- Quantity per pack: 5 | Rod Length: 8 inches | Shelf Life: 2 years at ambient temp. | Density (Lbs/in³): 0.19 | Recommended Brazing Temp.: 950-1000°F (510-537°C) | Liquidus: 905°F (471°C) | Solidus: 826°F (441°C) | Appearance: Silver-Colored with White Flux Channel.
- Supplying Demand replacement parts are compatible with Major Brands, but you should always verify compatibility with your specific application..
Check StockPhlizon 2023 Upgraded 600W LED Plant Grow Light with Samsung LEDs Full Spectrum Plants Light Double Switch Grow Led for Indoor Plants Veg and Flower (600W)
- .Low Power Consumption: Using sophisticated production technology, the metal halide lamp has a service life and low power consumption. hooks & hangers..
- Metal Halide Lamp Metal .High Output Luminous Flux: The metal halide lamp has high output luminous flux, excellent performance, and can be used for a time. Service Life..
- 0.Scope of Application: Made of high quality glass and aluminum alloy, suitable for tying branches of grapes, tomatoes, etc..
- .Function: Can stimulate the growth of plants, suitable for fast growing plants, greatly accelerate the growth of flowers and fruits..
- Operation: Wait 3 to 5 minutes to get full brightness, wait at least 5 minutes after turning off the power, and then restart..
Check Stock
RvSky Household Garden Products Metal Halide Lamp 400W Low Power Consumption Plant Growth Bulb Replacement 110V to 240V
- SCOPE OF APPLICATION: The replacement metal halide is made of high-quality glass and aluminum alloy, and is suitable for tying branches such as grapes and tomatoes..
- SPECIALLY DESIGNED FOR PLANT GROWTH: Plant growth lights can stimulate plant growth, suitable for fast-growing plants, greatly accelerate the growth of flowers and fruits, and greatly accelerate the growth of flowers and fruits..
- HIGH-QUALITY UNITS: Precision-manufactured components precisely present the most nourishing spectrum for your plants.
- grow bulb premium housings won't distort or dim light output..
- HIGH OUTPUT LUMINOUS FLUX: The metal halide lamp has high output luminous flux, excellent performance, and can be used for a long time. Metal halide lamps adopt mature production technology, with long service life and low power consumption..
- OPERATION: Wait 3-5 minutes for clear metal halide bulbs to reach full brightness, wait at least 5 minutes after power off, then restart..
Check Stock
AmicoPower MTS-165, 165-Amp MIG MAG Lift-TIG Stick Arc Combo DC Inverter Welder, Compatible Spool Gun SPG15180
- MTS-165 integrates the most innovative design structure and technology, featuring all the functions of every welding machine: MIG, MAG, Flux core, Lift TIG, Stick and Spool gun (which can weld aluminum). It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron and copper.
- all up to around 1/4 inch. The MTS-165 is the most efficient machine for every task..
- The MTS-165 uses a high-quality wire feeder to ensure smooth and stable wire feeding. When using MIG/MAG/Flux-core welding, it is very easy to adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
- MTS-165 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
- MTS-165 is designed and manufactured according to the highest....
Check Stock
MTS-205 205 Amp MIG/TIG-Torch/Stick Arc Combo Welder Weld Aluminum MIG 110/230V Dual Voltage Welding New
- MTS-205 integrates the most innovative design structure and technology, featuring all the functions of every welding machine: MIG, MAG, Flux core, Lift TIG, Stick and Spool gun (which can weld aluminum). It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron and copper.
- all up to around 1/2 inch. The MTS-205 is the most efficient machine for every task..
- The MTS-205 uses a high-quality wire feeder to ensure smooth and stable wire feeding. When using MIG/MAG/Flux-core welding, it is very easy to adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
- MTS-205 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
- MTS-205 is designed and manufactured according to the highest....
Check StockSolder Flux (56.6 grms)| flux paste | rosin solder | electrical flux paste | solder paste no clean | flux paste for soldering | rosen flux paste | solder flux electrical | flux paste for electronics
- [Enought Quantity] : This rosin solder flux comes in 1 jar of 56 grams of soldering flux..
- [Non Corrosive]: This non acid flux is not conductive in dry conditions and has good insulation. Is not corrosive to metal substances such as circuit boards..
- [Oxidation Resistance] : This solder flux for electronics Anti-oxidation effect on soldering iron head of gold-copper alloy substrate. Solder flux for semi-solid, not easy to dump or waste..
- [Strong Capability]: This rosin paste flux is suitable for welding instruments, gold, copper, tin, iron and other metals. Ideal for electronic welding, repair and rework..
Check Stock
AMICO MTS-185, 3-in-1 Combo 185-Amp MIG Lift-TIG Stick Arc DC Inverter Welder, Compatible Spool Gun Welding Aluminum: SPG15180.
- MTS-185 integrates the most innovative design structure and technology, featuring all the functions of every welding machine: MIG, MAG, Flux core, Lift TIG, Stick and Spool gun (which can weld aluminum). It can perfectly weld all conductive metals: aluminum, aluminum alloy, stainless steel, alloy steel, carbon steel, steel, cast iron, iron and copper.
- all up to around 3/8 inch. The MTS-185 is the most efficient machine for every task..
- The MTS-185 uses a high-quality wire feeder to ensure smooth and stable wire feeding. When using MIG/MAG/Flux-core welding, it is very easy to adjust the welding current and wire-feeding speed. The output is easily adjustable according to the thickness, and polarity is easily altered according to the wire type. Even beginners can complete any task efficiently and easily with this machine..
- MTS-185 is designed with an intelligent power supply system. It can automatically detect the input voltage and easily switch between 110V and 230V. Extending the power cord by 700 feet can also resist cable attenuation and still allow the machine to work normally. It is very suitable for operations on construction sites, house maintenance, docks, and even agricultural sites..
- MTS-185 is designed and manufactured according to the highest....
Check StockSolder Tip Cleaning Brass Wire 6 packs, Replacement Cleaning Brass Wire for Soldering Station Tip Cleaner
- SOLDERING IRON TIP CLEANER: Effectively remove iron oxide and solder on the iron tip..
- IMPROVE EFFICIENCY OF WELDING: Without adding water,avoid iron head cooling,no the outbreak of solder ball,improve the efficiency of welding..
- ALUMINUM HLODER CASE: Aluminum with strong corrosion resistance..
- COPPER WIRE BALL: The brass ball contains flux to effectively remove the iron oxide and extend the life of the iron tip..
- ECO-FRIENDLY: No contamination risk compared to conventional tip tinners.
Check Stock
10 Pieces No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance
- Nice combination: you will get 5 no clean soldering flux pens and 5 solder remover wick sets, 10 in total, sufficient quantity, thoughtful combination, to meet daily use and replacement needs.
- Appropriate size: the no-clean solder wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, and liquid flux brush flux pen is about 15 x 1.5 cm/ 6 x 0.6 inch, convenient to hold.
- Please check the size carefully before purchasing.
- Multiple reliable materials: these no-clean braided soldering wicks are made of quality copper wire, using nice weaving technology, which can enhance surface tension and absorb excess solder.
- And flux remover pen adopts quality material, non-leakage, flux safe and prevents you from being exposed to organic solvents.
- Practical tools: soft brush tip flux pen releases a moderate stream of liquid to clean components without spoiling the PCB copper foil or IC pins.
- Solder remover has good thermal conductivity and absorption, helping to reduce the risk of thermal spoiling to the board.
- Broad utilization: these flux pens and braided solder wicks can be applied in laboratories, computers, home repairs and to correct small PCB errors and through-hole joints, electronic soldering and much more, bringing a lot of convenience and effic....
Check Stock 
