Reviews Aluminum Floor Jack 2

VEVOR Floor Jack, 3 Ton Low Profile Floor Jack, Aluminum and Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, Floor Jack Lifting Range 3-6/11"-19-11/16"

  • ...fting Needs: Min. Height: 3-6/11"/90 mm. Max. Height: 19-11/16"/500 mm. The wide lifting range meets your lifting needs of family cars, trucks, SUVs, etc. And a dual parallel pump system allows you to lift to the highest in full 7 strokes. Speed up your process..
  • Light But Sturdy: Boasts heavy-duty steel and durable aluminum construction, VEVOR low-profile floor jack is sturdy to use and light to carry. It is equipped with 4 wheels (2 rear wheels are universal), making the jack easy to maneuver, steer, or roll. And the design of the armrests on both sides is convenient for carrying and positioning..
  • Secure and Carefree: A rubber saddle and a foam handle bumper provide maximum protection to your vehicle! The 360° rotatable saddle can be detached and replaced. Thanks to the leverage principle, the 45" long handle makes lifting easier. With the two-piece design, the handle can be disassembled when stored, taking up little storage space..
  • Meet International Certifications: Comply with CE certification (2006/42/EC (EN1494, EN 12100)), UKCA certification (SI 2008 NO.1597(BS EN1494, BS EN 12100)), and ASME PALD-2014 STANDARD. Our jack features a built-in load system that avoids use beyond load capacity. And the excellent sealing system ensures your security a....
Check Stock

AME 13121 Aluminum Jack (55 Ton 6\ Stroke with New Saddle and)

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack by fortifying your home structures with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 12 inches to 16 inches (30.5 to 40.7 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Min and max heights offer up to 9,700-pound (4,400 kg) weight capacity.
Check Stock

Bonbo Floor Jack Seals Kit, 2 Ton, Quality Replacement Parts for Repairs Compatible with Lincoln Walker Model 93642 All Series Floor Jack Series B C E

  • Prevent your Jack Points from bending when using a jack to lift your car.
  • Compatible with most late model BMW or Mini vehicles.
  • Durable polyurethane construction, soft enough to absorb hard edges while supporting the vehicle.
  • Please ensure proper floor jack sizing and safety precautions, if the floor jack being used has a SMALLER lift point than our jack pad, it may cause the jack pad to fold.
  • Base Diameter: 2.8 Inches Square Dimensions: 2.2 Inches, does not fit Trolley Jacks.
Check Stock

ELITEWILL Black Aluminum Front Lower Engine Splash Shield Guard Under Tray Cover Skid Plate Fit for 2003-2009 Nissan 350Z & 2003-2006 Infiniti G35 and 03-07 G35 Coupe

  • The Black Aluminum Under Tray is a direct fit for 2003-2009 Nissan 350Z, 2003-2006 Infiniti G35 RWD Sedan and 03-07 G35 Coupe..
  • The Engine Skid Plate made from high quality aluminum,Lightweight and much more protection.While strengthening bumper support for better stability at....
  • Ventilation holes with laser cut to direct fit in the stock location.And these added holes to help hot air escape from the engine compartment. So as....
  • Easy oil change and Easy cleaning: With the integrated oil change access door all you have to do is remove 2 bolts and you have ample room to get to....
  • Installation is quick and requires little working knowledge.Most people can do it on there own with a floor jack, jack stands,and a 10mm wrench..
Check Stock

Jack Boss Jack Pad Universal Large Floor Jack Rubber Pads Adapter Pinch,Weld Side Frame Rail Protector Puck/Pad (1 Pack)

  • 【Material&Function】Sturdy rubber jack pad is durable and non-deformable with long service life.Soft enough pad surface is to prevent frame rails and pinch welds from bending,and protect painted or coated chassis parts when using floor jack to lift the car.
  • 【Unique Groove Design】Center down groove design of floor jack adapter provide more cushion and crush resistance.The wider and deeper groove contact area than other rubber pads ，making groove aligns nicely insert weld.Fits snug at the base and sits very sturdy on the jack.Have greater security.
  • 【Size&Note】Jack pads diameter：4.17 inch.Thickness:1 inch.Groove width:0.7inch.Groove depth:0.23 inch.Maximum load bearing:3 Ton. 1*jack pad. Please measure floor jack's saddle size before purchase.
  • 【Universal Floor Jack Rubber Pad】Protector Puck/Pad fit most standard hydraulic floor jacks and vehicles.Easy to install and change.
  • 【Notes】If you have any question you can contact us，we will be the first time to solve for you.Our floor jack pads are tested for strict quality.
Check Stock

TCE AT830011LU Torin Hydraulic Low Profile Aluminum and Steel Racing Floor Jack with Dual Piston Quick Lift Pump 3 Ton 6,000 lb Capacity Blue

  • Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity.
  • Foam bumper on the handle helps protect your....
  • Constructed of durable, high-strength aluminum and steel.
  • Dual piston quick lift pump allows you to easily raise the jack to the desired height.
  • Lifting range from 3-15/16" to 18-5/16" allows you can gain easy access under low-profile vehicles.
  • Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • Convenient side handle makes it easy to carry.
  • Features a built-in safety overload system prevents use beyond load capacity.
  • Includes a limited 2 year manufacturer warranty.
Check Stock

Torin TAM820010L Hydraulic Low Profile Aluminum Floor Jack with Dual Piston Quick Lift Pump, 2 Ton (4,000 lb) Capacity, Black

  • Racing floor jack can be used for general or specialty use and features a 2 ton (4,000 lb) capacity.
  • Constructed of durable, high-strength aluminum and steel.
  • Equipped with a dual piston quick lift pump, allowing you to easily raise the jack to the desired height.
  • Lifting range from 3-9/16" to 17-5/16" allows you can gain easy access under low-profile vehicles.
  • Foam bumper on the handle helps protect your vehicle from damage.
  • Features a built-in safety overload system prevents use beyond load capacity.
  • Includes a limited 1 year manufacturer warranty.
Check Stock

Jack Boss Floor Jack 3 Ton Capacity Fast Lift Service Jack Steel Heavy Duty Hydraulic Car Jack

  • Specifications:Hydraulic trolley jack features a 3 ton (6,600 lbs) capacity with lifting height from 5.1" to 18.3".Floor Jack saddle Diameter: 4 inch.With quick lift function.Its the best tool for car repairing and auto emergency treatment in garage,shop.
  • Durable Steel Construtions:Heavy duty steel construction provides years of service.Equipped with rugged universal joint for precise load control.Premium stability allows the service jack to work for a long time on all kinds of roads.
  • Safety Guarantee:Car jack comes with built-in internal safety valve and vent plug ensures safe operation.Padded handle provides vehicle protection when jack is lifting.Each floor jack has been rigorously tested to ensure the safety of work.1 Year Warranty guarantee for free return.
  • Flexible Swivel Casters:Equipped with Pair 2" steel front casters and pair 2" 360-degree swivel casters (solid rubber material) for easy positioning of jack.Meets ANSI/ASME PASE safety standards..
  • Applications for Convenient Use:Widely used for car tire change.Lifting range & capacity fit for most cars, trucks, and SUVs.Please carefully check whether our products match your vehicle parameters before purchasing.
Check Stock

Torin TAM815016L Hydraulic Low Profile Aluminum and Steel Racing Floor Jack with Dual Piston Quick Lift Pump, 1.5 Ton (3,000 lb) Capacity, Black

  • Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity.
  • Constructed of durable, high-strength aluminum and steel.
  • Equipped with a dual piston quick lift pump, allowing you to easily raise the jack to the desired height.
  • Lifting range from 3-1/2" to 14-1/8" allows you can gain easy access under low-profile vehicles.
  • Foam bumper on the handle helps protect your vehicle from damage.
  • Convenient side handle makes it easy to carry.
Check Stock