5 Pcs Anchor Wire Vise Anchor Vise Grape Trellis Anchor Vise for Tightening 12-13 Gauge Wire to Build Trellises, Vineyards, Fences and Arbors

  • Package Contents: you will receive 5 pieces of anchor wire vises for building trellises and vineyards, the sufficient quantity is enough for your daily use and replacement needs.
  • Quality Material: these anchor vises are made of quality aluminum material with long term applicable ability.
  • These anchor wire vises can effectively keep the wire from slipping out.
  • Size Information: the size of our wire vise measures approx. 6 x 3 x 3 cm/ 2.36 x 1.18 x 1.18 inches, the portable size is convenient for you to carry or store those tiny wire vises.
  • Wide Range of Applications: our gauge wire vises can be applied to build trellises, vineyards, fences or trees, providing you with an optimized experience for your garden work.
  • Choice of Wire: it is recommended to use the anchor vise for grape trellis with bare or galvanized wire, not with wire with other coatings.
  • For proper application of the wire vise, please pay attention to and follow our recommendations.
Check Stock

38-inch Windmill Head w/Texas Flag Rudder & Instructions to Build an 11-Foot Tall Windmill

  • Premium Quality - Made in the USA - Decorative Aluminum Windmill.
  • Strong, study aluminum tubular legs with flat aluminum cross pieces.
  • Hand welded 30 inch aluminum wheel, greaseable ball bearings.
  • Vinyl trim on tail and blade tips in red - unique ground anchor plate.
  • Stainless steel bolts and nuts will not rust, never needs painting..
Check Stock

FPS 6 Duckbill Earth Anchor Cable Stakes 20'' and 1 Duckbill Stake Driver

  • 6 Pack - Duckbill 40-DB1 Earth Anchors with Drive Steel Tool Installing Duckbill Earth Anchors using an upward pull rotates the Duckbill into a load-lock position approximately 15° from horizontal. Further tension causes the anchor to plane sideways through undisturbed soil, increasing its holding power to up to 300 lbs. Nothing of the anchor is above the ground. Duckbill ends are Made of aluminum alloy it will not corrode or rust..
Check Stock

Youliang 10PCS Bleed Fitting Rubber Cap for Bike Hydraulic Disc Brake, Black

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else!.
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 5 Pieces = 1Pcs 12inch Lengths of Aluminum L-Track (Pre-drilled holes for easy installation), 4 Pcs Stainless Steel Single Stud Fittings with Round Rings. Does not include the mounting hardware..
Check Stock

DREAM SOLUTIONS USA Twin Size Metal Day Bed (Daybed) Frame & Pop up Trundle with Great Firm Mattresses Included Package Deal!

  • ❀ Premium Material – Our Greenhouse for outdoor made of ahigh quality aluminum frame and 4mm win-wall polycarbonate roof panels. The panels allow up to 70% light transmission for optimal plant growth while blocking out over 99% of harmful UV rays. It also can help you protect plants from frost, rain, overheating and pets. It is perfect for seedlings, flowers, vegetables, Mushroom and herbs and so on ..
  • ❀ HUMANIZED DESIGN – The walk-in greenhouse which can effectively improve the wind resistance of the product. The rain gutters on both sides can effectively drain rain and snow. They are also a good way to attach a hose to collect the rain for watering the plants inside. The sliding door also makes it more easier for you to walk into the greenhouse for daily use. The 2 window vents are designed with 5 adjustable angles for proper air flow, and provides continuously fresh air to your plants..
  • ❀ HEAVY-DUTY UPGRADED FRAME – The frame of our aluminum heavy-duty greenhouse kit is made of premium corrosion resistant and weather resistant green powder-coated thickened aluminum which is rust-resistant and more sturdy to deal with all kinds of weather. The internally tight closure triangular structure can effectively improve the stability of the outdo....
Check Stock

WACASA Upgrated Polycarbonate Spring Greenhouses Kit Heavy Duty,6'L x 6'W, w/Sliding Door and Vent Window for Outdoors All Season

  • Features:Virtually unbreakable 4 mm twin-wall polycarbonate panels block up to 99.9% of UV rays and diffuses intense sunlight that can stress plants and Rust resistant green powder-coated aluminum frame and galvanized steel base.
  • Upgrated Version: detailed assemble video for reference.Reinforced aluminum structure (profiles thicker than standard structures).
  • Note: Supports snow loads of 15.4 lbs. per sq. ft. and wind gusts of 56 mph when combined with anchor kit Note: Supports snow loads of 15.4 lbs. per sq. ft. and wind gusts of 56 mph when combined with anchor kit not included in the kit.
  • Package included:two boxes will be shippied, but may not deliver on same day..
  • Warranty: for 1 year from the sale of date.Does not apply to damage resulting from "force majeure.
Check Stock

US Cargo Control Black Powder Coated Aluminum L Track Tie Down System - 8 Piece Powersports Kit Includes 4 Foot L Track and Single Stud Fittings

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else! The black track has a powder coat paint finish to protect the aluminum, and resist scratches and scuffs..
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 8 Pieces = QTY 4: 4' Lengths of Black Powder Coated Aluminum L-Track (Pre-drilled holes for easy installation), QTY 4: Single Stud Fittings with Stainless Steel Round Rings. Does not include the mounting hardware..
Check Stock

US Cargo Control Black Powder Coated Aluminum L Track Tie Down System - 6 Piece Powersports Kit Includes 4 Foot L Track and Single Stud Fittings

  • VERSATILE - Add these truck bed anchors wherever you need anchor points in your trailer, truck bed, or anywhere else! The black track has a powder coat paint finish to protect the aluminum, and resist scratches and scuffs..
  • STRONG - The L Track in this L Track tie down system is manufactured in a lightweight, high strength aluminum (6061-T6)..
  • USES - This truck bed tie down system can also be used as tie down anchors for trailers. Use these anchor points when transporting a variety of items including: ATVs, UTVs, Motorcycles, Dirt Bikes, Snowmobiles, Lawnmowers, etc..
  • RATING - There is no rating on the L Track as the rating is affected by the material these are attached to. The Single Stud Fitting with Round Ring is rated based on the angle of the pull: Straight Pull 1,333 lb. Working Load Limit (WLL) | 45 Degree Pull 1,000 lb WLL | 90 Degree Pull 667 lb. WLL..
  • INCLUDES - 6 Pieces = QTY 2: 4' Lengths of Black Powder Coated Aluminum L-Track (Pre-drilled holes for easy installation), QTY 4: Single Stud Fittings with Stainless Steel Round Rings. Does not include the mounting hardware..
Check Stock

Fall Protection Distributors LLC SSRA1 4 Piece ProPack - OSHA/ANSI Certified Standing Seam Roof Fall Protection Kit for Safety

  • ...ed to adjust the roof anchors because OSHA/ANSI testing to 5,000 lbs in all directions of pull allows access to both sides of the roof..
  • VERSATILE LIFE-SAVING DEVICE: The SSRA2 ProPack includes a torque wrench with a 3/16-inch socket bit, four packs of D-rings with 6061-T6 aluminum bodies, 3/16 hex bits, cupped tips, and nylon tip set screws for securing multiple devices..
Check Stock