Reviews Aluminium Connector Clamp

OWON Current Clamp Meter Multimeter CP-05+ Clamp Current Probe 200KHz 400A for Oscilloscope 4A 40A 200A 200-400A Test Range with BNC Connector

  • ...accurate current readings .The current clamps are the ideal tools to extend the current ranges of Oscilloscope tools.Support Auto zero at power on, relative zero correction function.It has Band wide up to 200KHz,support low battery indication .Adopt of amorphous alloy core, with high performance, low loss ..
  • ¡¾BNC connector¡¿The current clamp Multimeter features a BNC connector and can be plugged directly use. After connected well, switch the current clamp on (power LED should light) and then clamp the jaws around the current carrying conductor as shown. Typical Uses The AC/DC Current Probe simply offers the best value for money without compromising resolution..
  • ¡¾Multiple Test Ranges¡¿The OWON CP-05+ current clamp is ideal for use with automotive oscilloscopes for measuring currents between 1 mA and 400 A. Various current test range, 4A, 40A, 200A, 200-400A test range are available.Low noise level, and high detection accuracy..
  • ¡¾Easy to Use¡¿The current clamp has range selection settings, set by a slider switch on the handle of the probe. In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required. These current clamps h....
Check Stock

2 Pcs 1" Aluminum Ball Clamp Mount for Underwater Diving Light Arms Tray System, Photography Diving Camera

  • Ball clamp underwater is Made of hard coat anodizing aluminium, great the anti-corrosion, durable to use..
  • Standard ball clamp used to attach two arm, base adapters and strobes together..
  • It can rotate 360 degrees,versatile, practical, powerful.
  • This standard ball clamp mount attaches two 1-inch diameter balls. Thicker plates provide the perfect combination of strength and range of motion. Plates are spring-loaded for easy assembly and breakdown of your arm system..
  • 1'' inch Diamter,compatible with RAM ball mount base. Portable.
Check Stock

abcGoodefg 4 Sets Brass Garden Hose Mender Female and Male Hose Connector 5/8 Hose Fittings Garden Hose Adapter Water Hose End Replacement Repair Kit with Clamp and Rubber Gaskets

  • Standard 5/8″ hose connection — The brass garden hose mender’s diameter is approx. 14mm/ 0.56 inch, fit for 5/8 inch hose for easily insert and remove hoses, please select the corresponding size before placing an order. Brass connector with the stainless tightening clamp you can make it tightly as you want. Work with your garden hose, sprayers, nozzle, etc..
  • Wide applications — This hose end replacement kit can be use to garden hose mender, end hoses male mender, end hoses female mender, hose repair mender. You can use them to repair or replace broken female or male hose connector, connect to male or female quick connector to lengthen the hose, use with water faucet, etc..
  • Easy to Use — This garden hose adapter use to repair and connect the water hose end. Easy to connect and disconnect when replacing the end of the garden hose, quick and easy, no additional tools are required, just by hand, suitable for using with garden hose, pipe tubing, and water equipment system, hose repair mender, etc..
  • Sturdy material — These hose fittings are made of brass, which is rustproof, corrosion resistance and durable, and the stainless steel hoop clamp can avoid garden hose leakage..
  • Packge Included — 4 Male Mender + 4 Female Me....
Check Stock

Hourleey Garden Hose Repair Fittings, Zinc and Aluminum Male and Female Hose End Water Hose Repair Connector, 4 Pack

  • Package include: 2 pack female thread end hose repair connector with zinc clamp, 2 pack male thread end hose repair connector with zinc clamp.
  • Material: female and male hose repair connectors are made of high quality aluminum, the clamps are made of zinc, the screws are made of stainless steel.
  • Easy to use: easy to connect and disconnect, Hourleey repair connector can be use to repair and connect the water hose end..
  • Widely use: Fit for 3/4" or 5/8 hose fittings, the screws will not strip when tightened..
  • Good Service: If any problem, please feel free to contact us, Prince Team offer replacement and full refund services..
Check Stock

REGNHLIF Zinc and Brass Male Clamp Coupling,Fits 3/4" or 5/8" Garden Hose Repair Fitting

  • End Male Hose Connector/Replacement/Mender For 5/8 inch or 3/4 inch hoses.
  • Brass Male Coupling, Zinc clamp and stainless steel screws.
  • Easy to use and reliable,Work perfectly with any standard garden hose.
  • Made with precision process, no leaking and durable, reusable and easy to install.
  • Package include:1 Pack Hose Connector Kit (1 Male coupling + 1 clamp + 2 screws).
Check Stock

SMALLRIG Articulating Magic Arm with Double Ballhead NATO Clamps, Monitor Mount for Field Monitor, Lights, Audio Recorders, DIY Camera Rig - 2072

  • Double NATO Clamp Ball Head:An articulating magic arm with double NATO Clamp Ballhead (Made of aluminium alloy, durable, solid and sturdy), which can realize quick released and attachment. It could be slided to get the balance of the whole kit by the NATO rail design.
  • Flexibility: Camera monitor mount could be attached to a camera or monitor cage with NATO rail by the NATO clamp. The monitor mounted on it could be adjusted in different positions and angles via both the ballhead and ballhead clamp.
  • Strong Compatibility: The double NATO Clamp Ballhead can not only be attached to camera cages with NATO rail (such as gh5 cage rigs SmallRig 2049, SmallRig 2050, SmallRig 2051, SmallRig 2052) , top plates or side plates (such as Side Plate SmallRig 1847), but also can be attached to monitor cages with NATO rail, such as Monitor Cage(5″) SmallRig 1726, SmallRig 2008, Assassin Cage for Ninja SmallRig 1788,Cage for SmallHD SmallRig 1834 or other products with nato rail.
  • Knob Lock:A single wingnut (rotary knob) is applied to lock and tighthen the double ballhead directly, and thumb screws on both ends are utilized to lock the devices manually.
  • Please Note: the best load (max load) of the NATO Clamp Ballhead is 1.5kg.
Check Stock

LotFancy Battery Terminal Connectors Tinned Brass 4PCS Quick Release Disconnect Car Battery Terminal 4 Way Positive Negative for SAE/JIS Type A Posts

  • 【4 Way Battery Terminal】Pack of 4. This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
  • 【Dimension】For wires diameters 4.1 – 8.2mm (AWG gauges 0 – 16) or section 13.5 – 53.5mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
  • 【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
  • 【Sturdy & Durable】The battery terminals are made of tinned brass, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss.
  • 【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Ju....
Check Stock

Yizhet Bike Handlebar Extender, Lightweight Durable Aluminum Alloy Double Bicycle Handlebar Extension Bracket for Holding Motorcycle E-Bike Lamp Speedometer GPS Phone Mount Holder (Aluminum Alloy)

  • 【Compatibility Notice】- The Bike handlebar extender fit most bikes, suitable for handlebars of normal size (25.4 mm) and up to an oversize (31.8 mm). and Please Note: Due to handlebar's different, please try to find a suitable position on your handlebar to install this extension to avoid easy slipping problem..
  • 【Durable Aluminium Alloy】- Made of Aluminium alloy material ,very lightweight and the clamps well designed and sturdy, It is not easy to rust or fade, corrosion resistant and durable..
  • 【Double Clamp and Gasket Design】- The double clamp for fixing can firmly fix the handlebar bracket. Double rubber pads protect your handlebar from slipping or scratching off the bar..
  • 【Easy Installation】- The screw buckle is durable. Use high quality screws, double protection. Equipped with hexagon wrench, easy to install and detach, use and adjust..
  • 【Multifunctional Bicycle Extender】-The practical bike rack adds extra space to your bike, used to fix bike lights, speedometers, GPS devices, smart phone racks, etc..
Check Stock

25ft KMR400 Coax Extension Cable N Male to N Male Connector 50 Ohm Low Loss Coaxial Cables for 3G/4G/5G/LTE/GPS/WiFi/RF/Ham/Radio to Antenna or Phone Signal Booster Use Not for TV

  • ...lack in color and it is Ultra Low-Loss Coax Cable,which mean that it incurs a very low loss.Signal loss of this 25 ft cable on 3000MHz is less than 2.3dB that allows transfer of signals over large distances with minimum signal loss..
  • High-quality Materials: The inner conductor of our n type coax cable is copper clad aluminium so it is very efficient and causes very low signal loss, and the cable is heavy duty. The Jacket is made of the flexible and proof-water pvc that could be used so long in the harsh environments in the outdoor..
  • Prevent Coming Off: Our coaxial cable adopt the clamp connector not the crimp type connector so the connector will not easy come off from the cable and all the connections are solid and professionally attached.We use the black heat shrink tube and lined adhesive by heat shrinking to connect the adapter and the coaxial cable . And the length is up to 2.2 in that is longer than others which would prevent the code coming off..
  • Compatibility: This ultra low-loss 400 n cable is designed to work with all devices and appliances with 50-Ohm impedance. Works for any 50 Ohm RF system. Such as an antenna and amplifier,and they can be used inside building or outside buildings. It enables perfectly secure connections between an amplifier....
Check Stock