Reviews Alumina Ceramics

OTOOLWORLD 99.3% Alumina Crucible Al2O3 Assay Crucible for Lab Laboratory (100x40x20MM)

99.3% Alumina, and can work maximum 1600℃.
Crucible use temperature: less than or equal to 1600 degrees Celsius. And the heating rate is recommended not to exceed 50 degrees Celsius per minute..
As the crucible material is the alumina, try to avoid firing and alumina chemical reaction of the test..
please note that the test process of heating and cooling as slowly as possible. This will extend the service life of the product..

99.3% Alumina, and can work maximum 1600℃, select the size you need.
Crucible use temperature: less than or equal to 1600 degrees Celsius. And the heating rate is recommended not to exceed 50 degrees Celsius per minute..
As the crucible material is the alumina, try to avoid firing and alumina chemical reaction of the test..
please note that the test process of heating and cooling as slowly as possible. This will extend the service life of the product..
please note: the color may a little different as photo because of the firing procedure, Will not affect the use.

99.3% Alumina, and can work maximum 1650℃.
Crucible use temperature: less than or equal to 1650 degrees Celsius. And the heating rate is recommended not to exceed 50 degrees Celsius per minute..
As the crucible material is the alumina, try to avoid firing and alumina chemical reaction of the test..
please note that the test process of heating and cooling as slowly as possible. This will extend the service life of the product..

[UPDATED] A brand new Lift Tig gun with anti-aging rubber, outer woven material..
[APPLICATIONS] For YESWELDER MIG-250PRO MIG Welder, MIG-205DS MIG Welder and ARC-205DS Stick Welder..
2. Accesories: 10N50 Alumina Ceramic Cup #4 (1/4" orifice)//10N49 Alumina Ceramic Cup #5 (5/16" orifice)//10N48 Alumina Ceramic Cup #6 (3/8" orifice)//10N25 Collet 1/8"(3.2mm)//10N23 Collet 1/16"(1.6mm)//10N24 Collet 3/32"(2.4mm)//10N28 Collet Body 1/8"(3.2mm)//57Y02 Long Back Cap//57Y04 Short Back Cap..

【PREMIUM MATERIAL】Premium Wet Or Dry Sandpaper Is Constructed with white fused alumina abrasive which is the purest alumina(Alumina powder content....
【WET AND DRY SANDING】Latex paper backing is waterproof,good flexibility,wear-resistant.Will not easily break and damage during use,the durable....
【ELECTRO COATED TECHNOLOGY】 Electro coated ensures the grit distributed uniformly, anti-static,wear resisting and prevent clogging, Has Maximum....
【MULTIFUNCTIONAL】Suitable for construction,carpentry,Auto Body Repair project,automotive polishing and home improvement projects,Suitable for....
【EASY TO IDENTIFY】The grits of the sandpaper are printed on the back for easy identification,Product Size: 9 x 11 inches, Package Including : 12....

The 1/2″ x 10″ Replacement Belt Kit is for Work Sharp Combo Knife Sharpener (model WSCMB) and do not work with other Work Sharp products..
24 Pcs 1/2″ x 10″ Sanding Belts in total, including 4 pcs 80 Grits Zirconia belts, 4 pcs 120 Grits Zirconia belts, 4 pcs 240 Grits Alumina belts, 4 pcs 400 Grits Alumina belts, 4 pcs 1000 Grits silicon carbide belts and 4 pcs 1200 Grits silicon carbide belts..
As a professional sanding belt manufacturer, after hundreds of trials, we find that for a knife sharpner, the best material for coarse grit is zirconia, for medium grit is alumina and for fine grit is silicon carbide. So we provide this Replacement Belt Kit for perfect sharpening..
Precision engineered dual directional tape joints allow a smooth transition in either direction..
Anti-clogging compounds extend the lifetime of the belts..

Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.

Twin-tip technology with 11 mm platinum center electrode and 11 mm titanium enhanced ground electrode.
Improve fuel economy, better acceleration and faster starts than all other single platinum plugs.
Purified alumina powder insulator provides exceptional dielectric strength and thermal conductivity, allowing the material to stand up to extreme stress.

SI FANG grinding discs set includes flap discs of multiple grit, poly stripping disc, nylon polishing disc, felt polishing disc, satisfying your requirements from removal to fine polishing.
Widely used for cleaning, finishing & polishing on metal, stainless steel, glass, jewelry, plastic, ceramics, marble, wood crafts. This set of angle grinder flap sanding discs can almost meet all your requirements from rust removal to fine finishing. It is a value-for-money package..
Easy strip disc removes rust, paint and coatings quickly and easily, without damaging the original surface.
Nylon and Felt buffing discs are ideal for polishing and finishing all kinds of surface conditions.
Flap discs are designed for high speed sanding and heavy duty removal, delivering fast and long lasting cut. Cuting Wheels: Perfect for carbon steel, alloy steel, stainless steel, non-ferrous metals, and general purpose metal cutting..
Hard-wearing, low grinding noise.Uniform grinding effect, less dust. Our 60/80/120/240/320 grit 4 inch grinder disc sanding wheel are made of high-quality alumina, which is high in hardness. The service life is 3-5 times that of ordinary flap disc. Designed for high speed sanding and heavy duty removal, delivering fast and long lasting cut..