Reviews Alloy Steel Pipe Tee

PEX Pipe Plumbing For Beginners: Complete Guide To Plan, Design, Install And Maintain PEX Plumbing Systems

  • Directly from One of the Biggest Pex Systems Manufacturers.
  • NSF Certified Pex Pipe/Tubing 1/2" Blue and Red 100 ft x2 Rolls for Potable Water.
  • Pex Crimp Lead Free Brass Fitting 1/2" coupling, Elbow, Tee 5 PCS/each -15 PCS.
  • Pex Cinch Clamp Tool with 50 PCS Stainless Steel Cinch Clamps.
Check Stock

MOSTPLUS 28mm Exhaust Pipe Expander Stretcher Tool Set 1-5/8" to 4-1/4", Expander Tool for Tail Pipe Tube with Storage Case

  • [ Package Include ] --- 1 x Exhaust Pipe Stretcher Expander Kit & 1x Carry Case.
  • [ Material ] --- All collets are made of Aerospace-grade 6061 Aluminum, while the expander utilizes Tempered 40CR Alloy Structural Steel, ensuring rugged rigidity then extended service life.
  • [ Function ] --- Used to expand the low-carbon steel exhaust pipe, and make the exhaust seal with a smaller diameter pipe.
  • [ Expanding Range ] --- The exhaust pipe stretcher offers various collets for a broad expansion range includes: Steel expander 1 5/8"-2" Collet.
  • [ Easy Opeartion ] --- Choose a proper collet, clamp the pipe, then expand the pipe. Use 1/2" or 3/4" impact wrench will save more effort.
Check Stock

Prokomon Exhaust Pipe Stretcher Kit 1-5/8 to 4-1/4 Inches, Muffler Pipe Spreader Tool for Tail Pipe Tube

  • ◇ Heavy Duty Construction : All collets are made of aerospace-grade 6061 Aluminum while the expander utilizes Tempered 40CR Alloy Structural Steel, ensuring rugged rigidity over an extended service life. GB standard compliant..
  • ◇ The pipe stretcher kit is a convenient, inexpensive alternative to hydraulic pipe expanders..
  • ◇ Wide Expandinig Range : The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: Steel expander 1- 5/8" to 1-7/8" Collet ,Steel expander 2" to 2-1/2" Collet ,2-3/8" to 2-3/4" Collet ,2-3/4" to 3-1/8" Collet ,3-1/8" to 3-1/2" Collet ,3-1/2" to 3-7/8" Collet ,3-7/8" to 4-1/4" Collet.
  • ◇ Portable exhaust pipe expander tool, easy to use, suitable for most cars..
  • ◇ Used for expanding mild steel exhaust pipes to make perfect exhaust seals with smaller diameter piping..
Check Stock

John Boos GT-8 Carbon Steel Grease Interceptor 14.2 Long by 11.2 Tall by 10.5 Wide 8 lbs Grease Capacity

  • This Grease trap has an 8 pound grease capacity and measures 14.2" Long by 11.2" Tall by 10.5" Wide. It measures 2" from top to pipe opening, 7.5" from pipe opening to base.
  • Made from TIG welded 11 gauge (1/8 inch thick) carbon steel with a corrosion resistant coating.
  • Grease Trap features a non skid cover (deck plate) with locking device and removable baffle ensure lid stays securely closed..
  • T-Vent Pipe (Flow Control Tee) is included. Both ends of the Grease Interceptor accept no-hub adapters for steel or plastic.
  • This commercial Grease Trap/Grease Interceptor is certified by the Plumbing and Drainage Institute.
Check Stock

Tubing Flaring Swage Tool Kit - Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Thin Pipe With Tubing Cutter Tubing Bender & Ratchet Wrench

  • Note: The picture is for reference only, the actual product shall prevail. Material:Aluminum alloy steel cutter body, surface plating..
  • Tubing Cutter: suitable for cutting pipe diameter between (3-28mm)1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube..
  • 3 in 1 Pipe Bender: Three sizes of tubing 1/4", 5/16" and 3/8". Bending 0-180 degree copper , aluminum ,brass,and thin stainless steel pipes in the....
  • Double Flaring Tool Kit:This flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and....
  • Easy to Use:The Screw of the pipe cutters provide easy control of cutting pressure for clean cuts.Flare groove rollers make rotation simple and....
Check Stock

Big Dipper W-250-IS - 25 GPM Stainless Steel Automatic Grease Removal Unit

  • ...Upgraded Grease Trap】 Tee filter pipe design highly improves the filtering effect that oil floats on the surface, and the water flows from the bottom of the pipe to the next section. Special valve design for drain out all water, easy for you to clean the water tank. Made of heavy-duty 1.0 mm thickness stainless steel, which is strong and durable, anti-corrosion, not easily deformed. The double-layer edging process makes the edge feel more comfortable and will not cut your hands..
  • 【Working Principle】 Wastewater flows into the grease trap from the sink, the fats, oils, and grease will rise to the surface and be collected between the baffles. The water will sink and flow into next section from the bottom of the tee filter pipe. Food particles and grease are kept in the device. The removable filter basket can easily remove residual waste. The side outlet helps to take out any liquid for future clean up when needed..
  • 【Easy To Assemble】 Connect the pipe of the sinks and dishwasher to the Grease Trap inlet. Make sure to place it on a flat floor. Ideal for kitchen, restaurant, factory, school, or small sink or dishwasher applications..
  • 【Precautions】 1. This product is suitable for the treatment of oily water of mineral oil, animal oil, vegetable o....
Check Stock

EVIL ENERGY 2.25' 2 1/4 Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel 2pcs

  • Joins 2.25 inch OD Pipe to 2.25 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, muffler and catalytic converters. Width of strap: 2.94inch (74.8mm). Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the sections being clamped have sufficient lengths of straight pipe leading into it. It is removable and reusable, easy to install without welding..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

MATEWORK Pipe Cutter - Fast Tubing Cutter Set with Mini Cutter & Deburring Tool Pipe Cutter Tool for Cutting 3/16 to 2 Aluminum Copper PVC Stainless Steel Tube for Plumber and Home Working 3PCS

  • ... not only meet your pipe cutting need, but also fast clean inner reaming and outer deburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft steel tubing.Long-wearing alloy steel blades can extend the lifetime..
  • 【Good Helper】Our tubing cutter set is an ....
Check Stock

nuwfrog Tubing and Pipe Cutter 1/8 to 1-3/8 Inch with Extra Blade and Reamer for PVC Thin Stainless Steel Tube, Metal,Brass - Copper Pipe Tubing Cutter

  • 【Efficient and convenient】 The operation of cutting copper, brass, aluminum，thin stainless steel,PVC,PE tubes from 1/8"-1-3/8" (3-35mm) O.D. becomes more easy, clean and efficient..
  • 【Fine workmanship】High-quality alloy steel grinding blades, extremely sharp.The body is made of lightweight,durable aluminum alloy casting..
  • 【Versatile】This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops..
  • 【Ergonomic design】Knob provides a firm grip. Cutting tubes become a comfortable and quick task..
  • 【EXTRA blade and Reamer】Our pipe cutter also comes with an extra blade and a reamer .so you can cut as much steel tube as possible and help you clean the pipe. We truly believe our Tubing Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confidence..
Check Stock