Reviews Alloy Pipe Bend

HVAC Premium Heavy Duty Automatic PVC Pipe Cutter 36mm for Cutting Thin/Thick PVC 36mm & Below

  • Suitable for cutting (Thin & Thick) PVC tubing diameter below 36mm - Uses Ratcheting Design for Effortless Cutting.
  • STRONG SHARP CUTTING - Straight Cuts - Blade does not bend or break - Uses SK5 Japanese Alloy Steel V Blade For One Point Cut.
  • PRESICE CUTTING - Cutters have Adjusting Knobs to ensure you have the precise diameter dimension for specific tube/pipe diameter size.
  • EASY TO USE - With this comfortable handle you will have no trouble doing your cuts - Strong Grip Handle - Easy to switch out Blade, just unscrew! - See Our Listing for 46mm Replacement Blades.
  • QUALITY PACKAGING & SATISFACTION GUARANTEED - Hand Inspected for Quality - 100% Satisfaction Guaranteed, Don’t worry you’re covered by our 100% money back guarantee no questions asked..
Check Stock

XIFOWE Copper Tube 1/4 OD x 3/16 ID 5 Ft Tube Wall 1/32 Refrigeration Seamless Round Pipe Tubing Soft Coil Copper Tubing Used In Refrigerators Freezers Air conditioners DIY projects Etc

  • 【Size】✔ 1/4" OD - 3/16" ID (6.35-4.75mm) | Tube Wall: 1/32" (0.8 mm) | Length: 5 Feet (1.524M). Note that the actual length of the copper tube is slightly longer than 5FT because it is measured manually. In addition, when we cut the copper pipe, we used a ring cutter, which will deform the section surface, resulting in a smaller inner diameter from the section surface. Please rest assured that this will only affect the size of the section surface, but not the actual size of the copper pipe..
  • 【Material】✔Soft copper pipe copper pipe is made of high quality copper material, the surface is smooth without seam. Note, because it is made of pure copper, so the surface is inevitably easy to oxidation and discoloration, can be polished with high mesh sandpaper, will become bright and clean!.
  • 【Good Thermal Conductivity】: Good heat dissipation and refrigeration capability, high strength at low temperature. This is a good choice for refrigerators, freezers, air conditioners and other refrigeration equipment.
  • 【Shape Changeable】Soft, Because copper pipe can bend and deform, they can often be made into elbows and joints. Smooth bending allows copper tubes to bend at any angle. Or used in manufacture of magnetism instruments or meters..
Check Stock

VEVOR Tube Bender, 1/2 inch Pipe Bending Capacity 180 Degrees Manual Bending, for Aluminum and Stainless Steel Pipes in HVAC, Heating Pipe System

  • 1/2" Bending Capacity: The tube bender can quickly and smoothly bend 1 mm thickness tubes. And the tool is suitable for 1/2 inch (12.7 mm) pipe diameter. Made of high-strength steel material, it is a robust tool built to last..
  • Versatile Use: The pipe bender is suitable for copper, stainless steel pipes. Universal tubing bender is used in many fields, including construction sites, pluming jobs, heating and sanitary installations, garage and vehicle repair, home improvement..
  • 180° Bending Angle: The brake line bender can easily bend the pipes from 0 to 180 degrees. A clear scale mark makes the bending angle more accurate. Bending radius: 0.6 inch/14 mm..
  • Energy-Saving Structure: The steel brake bender adopts a 16 inch/40 cm handle with an ergonomic design for effortless operation. The handle can be reversed, thus tubes won’t be reformed. Compact design allows easy carrying, lightweight but gives enough bending force..
  • Easy to Operate: Our 1/2 inch pipe bender features easy and quick operation. First, open the tube bender, place a tube. Then align the zero mark before bending and slowly pull the shoe handle to the angle you want. Finally, you will get a bent pipe..
Check Stock

Steel Dragon Tools® 50767 Model 258 Power Pipe Cutter, Pipe Cutting Machine for 2-1/2-Inches to 8-Inch Schedule 10/40 Steel Pipe

  • ...he pipe firmly during cutting, helping pipe cutter perform cutting for 5 to 50mm pipe with stability and precision, especially for metal & steel material, which frees you from the trouble of unfit pipe and uneven cutting surface because of instability.
  • 【Heavy Duty】 - Made of high density but lightweight aluminum alloy, copper pipe cutter is durable and compact. It won’t be broken after many times of cutting and it will last a long time. And aluminum alloy body makes metal pipe cutter more suitable for high density metal material cutting.
  • 【Clear Cutting】 - Tube cutter with 6pcs ball bearing rollers offers you a smooth cutting, improving cutting efficiency. Some small burrs are inevitable. So our steel pipe cutter comes with a deburring tool, which is made of sturdy plastic construction and high-speed steel blades. It can be used on both sides to perform inner diameter reaming and outer diameter grinding on the inner and outer sides of the incision to prevent scratches.
  • 【Ease Of Use】 - The bottom of the steel pipe cutter is equipped with a knob, which is comfortable to hold, can quickly adjust the tool, and provides a strong clamping force to ensure the stability of cutting. Just rotate the tubing cutter, cut the pipe flawlessly.
Check Stock

Gardner Bender B1000 Portable Cyclone Conduit Bender

  • Precise, repeatable bends for early stage apprentices. Takes the guess work out of bend angles..
  • Attaches to almost any pipe threader to use as a bending power source.
  • Save time on the job site - More efficient than using a hand bender. Makes a 90° bend in less than 10 seconds.
  • 1 shoe for all sizes – no spare parts to carry around.
Check Stock

Hopwin Stainless High Pressure Hose Nozzle Long Spray Nozzle Garden Hose Car Wash, Water Hose Nozzle Suitable for Cleaning Your Home, Car, Garden (nozzle)

  • ...garden, hard-to-reach windows or boats, and tackling dirty wheels and rims..
  • ❤️STABLE AND STABLE ------ The pipe nozzle is developed and improved on the of the traditional plastic water spray nozzle. The spray head is made of brass to be twisted thousands of times. The alloy body makes it robust and durable enough to be used for a long time..
  • If you have any question you can always send us an e-mail. We will a-nswer you and solve your problem as soon as possible.Our goal is to provide a first class customer service. We will never let our customer suffer loss please give us a chance to serve you..
Check Stock

Krator 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit - 48" Straight, 90 Degree, 45 Degree, 180 Degree U-Bends Pipes

  • 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit.
  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it..
  • Each pipe is expanded on one end to allow easy installation..
Check Stock

Foam Pipe Insulation,Foam tubing for 1 inch Pipe ,25mm(1") ID 35mm OD 6.5 Foot Length Black

  • APPROX. SIZE – 25mm inner dia, 35mm outer dia, 5mm wall thickness, 6.5foot total length.
  • MATERIAL –The tubing is made of Rubber material, wear resistance, anti-aging, good elasticity, strong bending,Working temperature is -40°C to 80°C(-40°F to 176°F)..
  • ADVANTAGE –High elasticity, strong tensile, easy to bend, and aging resistant,Anti-skid foam is fixed on tools or appliances and is not easy to slip..
  • MULTIPLE USAGE – Household fitness equipment anti-collision pipe, industrial machinery anti-collision pipe, household fitness equipment anti-collision pipe, handle sponge cover, protection and insulation, water pipe insulation and insulation..
  • HOW TO USE – When installing the pipe, wet the steel pipe with lubricant and water, and then install a sponge, so it is easier to install the pipe..
Check Stock

WORKPRO Ratchet PVC Pipe Cutter Tool, Cuts up to 1-5/8\ PEX, PVC, PPR and Plastic Hoses, Pipe Cutters with Sharp 5Cr15MoV Stainless Steel Blades, Suitable for Home Repairs and Plumbers

  • 【High Quality】The pipe cutter is made of durable hardness aluminum alloy steel with high hardness, good toughness and high strength. The blade is made of 5Cr15MoV, which is not easy to rust, bend and break, and can cut the pipe evenly and accurately, not easy to deviate.
  • 【Wide Applications】Ratchet PVC Cutter is designed to OD up to 1-5/8"(42mm), ideal for cutting all kinds of plastic pipes and tubes (PVC, CPVC, PP-R, PEX, PE, Rubber hose, etc.), it is a must-have cutting tool for your handyman, plumber, electrician and vehicle mechanic.
  • 【Ergonomic Design】The pipe cutting machine adopts ratchet transmission technology, which can successfully complete the cutting operation with one hand, cutting more labor-saving and improving work efficiency. The ergonomic spring-loaded handle provides a reliable grip and strong bite, increasing productivity with fast cutting, faster positioning and single-stroke cutting. Users can cut pipes in 5 to 20 seconds.
  • 【Efficient and Safe】The ratchet drive design ensures the automatic locking function during the cutting process, protecting the user from the injury caused by the rebound of the blade. There is a plastic buckle on the bottom of the tube cutter for easy storage. When not in use, the handles on both s....
Check Stock