Reviews All purpose Welding Rod Clamp

Forney 31210 E6011 Welding Rod, 1/8-Inch, 10-Pound

  • All position welding, all purpose rod for deep penetration and fast freezing on dirty, rusty and painted materials.
  • Smooth arc wetting and spread with good spatter providing fast deposition and flatter contour fillets offering faster travel speeds^Minimal surface preparation required.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications.
  • Dependable and ideal for AC operation, can be welded DC+ too.
Check Stock

Mig Welder Machine Inverter Gas Gasless RBM1500 Mig Stick Tig 4 in 1 Flux Core 220V Supports 2LB Wire Automatic Feed for Beginner

  • [Multiprocess MIG Welding] gasless(flux core wire) and gas(solid wire) welding :supports 2lbs .030’’ or .040’’ wire to weld over .030’’ thickness carbon steel stainless steel/mild steel..
  • [Stick Welding] switch to “MMA” on the panel and adjust the current as needed,welding well with 3.2mm rod 7018 1/8″, 6013 and 7018 3/32″as well.
  • [Generator Supported] this welder works well with a generator,but we suggest a 5000W above generator【30A breaker suggested for 220V】.
  • [Warranty] buy this welder with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.Click on the add to cart button now!.
  • Packing List : 1X dual Mig150,1X earth clamp,1X electrode holder,1X welding torch,1X 2lbs flux cored wire,1X welding hose.
Check Stock

Welding Electrode 10pcs ARC welding rods Electrodes Mild steel 1.6mm - 3.2mm E6013 General purpose Welding Rods (Size : 1.4mm x 250mm 10pcs)

  • All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
  • Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
  • Not recommended for use with low open circuit-Voltage OCV power sources.
Check Stock

WeldingCity 5-Lb Stick Welding Electrode Rods E6013 1/8\ (3.2mm) Carbon Steel | Pack of 5-lb

  • PRODUCT: premium shielded manual metal arc-welding (SMAW) electrode E6013 for stick welding carbon steel welding in metal fabrication, maintenance and repair works..
  • SPECIFICATION: AWS A5.1 ASME SFA 5.1/E6013. 60,000 psi min. yield strength. Core rod diameters and electrode lengths: 1/8" x 14" and 3/32" x 12". Typical deposited chemical composition (wt%): C=0.08, Mn=0.50, Si=0.40, P=0.015, S=0.012, Fe-balance..
  • FEATURES AND APPLICATIONS: Runs on AC or DCEP (reverse) polarity or DCEN (straight) polarity. Light to medium penetrating. Easy steady arc with excellent wetting and ease of operation. Smooth and flat beads with low spatter. Easy slag removal. For sheet metal, irregular short welds that change positions. Good for general, all-purpose applications and joints with poor fit-up. All-position welding..
  • PACKAGE: pack of 5-lb and 10-lb. With volume discount. Buy More Save More!.
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Pneumatic Clamp, 300mm SC3250 100PSI Professional Professional Pneumatic Hold Down Clamp

  • SPECS-- Length: 300mm / 11.8in, Air Inlet Interface: M10, Cylinder Specification: SC32*50, Maximum Working Pressure: 9Kgf/cm²（0.9mpa）100PSI, Movable Distance of Clamping Rod: 60mm / 2.3in, Clamp Screw: M8.
  • ADVANTAGES-- The pneumatic clamp helps ensure the machining accuracy of the workpiece, and can reduce the intensity of labor of workers.
  • MORE-- Base Fixing Screw: M6 * 4pcs, Base Fixed Screw Spacing: right and left(19mm / 0.7in), up and down(31.8mm / 1.2in, Package Weight: Approx.1084g.
  • EASY TO USE-- The 300mm professional hold down clamp has simple operation, and is easy to achieve automatic control.
  • SCOPE OF USE-- This 100psi pneumatic clamp can be used in welding, fixture, mold and other positions.
Check Stock

4pcs Heavy Duty C-Clamp, Wood Clamps, Stainless Steel Right Angle Clamps Universal Bracket for Welding Carpenter Building Household Mount (Silver)

  • Material: Made of high-quality aluminum alloy precision casting, brushed surface, corrosion resistance, no rust, very strong, not easy to break..
  • C-Clamp Size: 4.13"x1.26"x1.35" (LxWxH)..
  • Ractical Design: This C-clamp is designed for woodworkers, welders and construction workers. It is suitable for general clamping needs for fastening, gluing and welding in metalworking and automotive applications. Flat design of the clamp ensures that the object being clamped will not deform easily..
  • Multi-purpose: This C-type fixture is specially designed for woodworkers, welders, construction workers. Heavy duty C clamp Suitable for parts assembly, fastening, welding, woodworking, metal processing, automobile manufacturing and other industries..
  • Easy To Use: No additional tools are required, just hand tighten. With an adjustable positioning screw, can easily clip to any desktop up to the clamping thickness is about 0.1-1 inches. Easy to disassemble, save more time and improve work efficiency..
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

WYNNsky Magnetic Welding Support Ground Clamp, 2pcs Set, Single and Double Welding Head, Copper Tail

  • Design: This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Super suction magnet at the bottom, large suction power, long-lasting magnetism..
  • Application: This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
  • Material: The welding magnet head adopts high quality material, durable and solid. Has brass tail has good welding stability, durable, anti-rust, has good performance and long service life..
  • Advantage: This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
  • Including 1pc Single Head Magnetic Welding Ground Clamp.
  • 1pc Double Head Magnetic Welding Ground Clamp.
  • 1pc Copper Tail Welding Stability Clamps..
Check Stock