Ade Advanced Optics PS001C 30mm Offset Cantilever One Piece Rifle Scope Mount
- This is a 30mm one piece riflescope rings. Mounting rings are pushed forward 2" for better eye relief..
- ADE Cantilever Mount was designed by the experienced merchandise experts and ADE is able to get it from OEM manufacturer to sell at a fraction of cost compare to other brands where purchase this same mount and resale for a lot higher.
- Our 3-bolt clamping systems with over 6,500 lbs of clamping force hold your scope firmly to the rail. Relief cuts designed into the scope tube bearing surfaces prevent scope pinching and ensure clamping forces are evenly distributed along the top and bottom of the scope body..
- The Mount has no protruding levers, bolts, or knobs to rap your knuckles, or get caught on clothing, gear, and surroundings.
- Height" 1.5". Weight 6oz. Screw Torque - 15 in-lbs. We are so confident in these mounts they are covered under our excellent Lifetime Warranty..
Check StockMonstrum Picatinny Rail Mount for Savage Axis/Edge Rifles |20 MOA | Old Version Pre 9/2021 Models
- Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on your rifle. For models manufactured before 9/2021 (Serial numbers below N936371), purchase the old Pre 9/2021 compatible mount. For models manufactured after 9/2021 (Serial numbers above N936371), purchase the new Post 9/2021 compatible mount..
- Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
- Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
- Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
- All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock
FENTUK 1
- 2 Pack FENTUK Scope Ring Adaptors With Picatinny Rail- 1 Inch & 30mm ring with picatinny top rail provides a solid mounting platform for adding an additional backup sighting tactical accessories to your rifle scope. Four screws on this ring ensure that the back-up sight will hold zero shot after shot, provide dependable long-lasting durability..
- Fit for 30mm & 25.4mm Scope Tube- Our rifle scope ring adapter with picatinny style, each ring with circular hard gasket design, the diameter of the ring from 30mm/1.18 inch to 25.4mm/I inch, effectively switch between two sizes, perfectly meeting your different needs!.
- 4 Slots Picatinny/Weaver Top Rails- Top 4 Slots 1.77" picatinny rail design, allowing you add on standard 21mm Picatinny or Weaver accessories, such as tactical flashlight, laser scope sight, red dot sights, micro red dot, backup/second laser sights, optics and other accessories..
- High Quality Aluminum, Solid & Durable- Precision machining of aircraft grade aluminum alloy in black matte anodizing finish. Sturdy & durable, lightweight & compact construction, offer stable safe performance in the field. Item size: 1.77"L x 1.72''W x 1.70''H, item weight:1.38Oz/1 pcs..
- Easy To Install & Remove- Our Scope Ring Barrel Mount is easy to install or remove ....
Check StockEGW Picatinny Rail Scope Mount Savage Rascal
- Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
- Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
- Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
- The ring is for most scopes which are in 1''/ 25.4mm scope tube..
- With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check StockMonstrum Picatinny Rail Mount for Remington 700 Rifles | Long Action | 20 MOA
- Picatinny rail mount built specifically for Long Action Remington 700 rifle platforms.
- Compatible with Long Action Remington 700 models only including: 270 Winchester | 300 Win Mag | 30-06 Springfield | 25-06 Remington | 338 Lapua.
- Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
- Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
- All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check StockMonstrum Picatinny Rail Mount for Remington 700 Rifles | Long Action | 0 MOA
- Picatinny rail mount built specifically for Long Action Remington 700 rifle platforms.
- Compatible with Long Action Remington 700 models only including: 270 Winchester | 300 Win Mag | 30-06 Springfield | 25-06 Remington | 338 Lapua.
- Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
- Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
- All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock
Starscope Monocular and Phone Scope Mount Bundle - Monocular Telescope with Phone Adapter Kit | 10X Scope for Cell Phone | IPX5 Universal Travel Adapter | Compact Phone Adapter for iPhone and Android
- STARSCOPE SPOTTING SCOPE SMARTPHONE MOUNTING SYSTEM - Take world-class photos from your phone! The 12X magnifying lens has a field of view at 305 ft/1000 yards. When it's combined with the monocular adapter and tripod stand (sold separately), it becomes the ultimate accessory for mobile smartphone photography. The cell phone mount secures the telescope to camera to your phone and lets you unleash the photographic power of the ultra-zoom optics lens.
- HIGHLY DURABLE TELESCOPE FOR IPHONE AND ANDROID - Engineered for adventure. The Starscope spotting scope phone attachment is built to keep up with you and your travels. The mobile telescope camera's small, shockproof, and rugged build makes it perfect for popping in a backpack. It’s IPX5 water-resistant and protects against sea spray, making it the perfect travel telescope phone mount. The must-have clip-on photograph phone device for cellphone photos..
- CELL PHONE TELESCOPE AND PHONE TRIPOD ADAPTER FOR NEXT-LEVEL PHOTOS - The Starscope Mount Kit has a universal adapter that easily adjusts to hold smartphones from 2.2” (58mm) to 3.5” (90mm) wide. Its portable and lightweight design makes it the ideal smart phone holder. The scope clip and cell phone telescope adapter turns your old or new smartphone in....
Check StockMonstrum Dual Ring Scope Mount Compatible with Ruger 10/22 | 1 Inch Diameter
- Dedicated dual ring scope mount compatible with the Ruger 10/22 platform.
- Scope mount installs directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required. The mount will not install on platforms other than the Ruger 10/22..
- 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
- Precision machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount design.
- All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check StockTutengelctri 1 Scope Mount 2Pcs High Profile Scope Rings for 11mm Dovetail Rails
- ▄︻┻┳═一 Double scope ring mount for 11mm dovetail mounts, specialized scope mount for .22/Airgun. Not for AR rifle..
- ▄︻┻┳═一 Scope Rings Type: High Profile (0.8inch),Fit for a .22 rifle or an air rifle using a 3/8" or 11mm dovetail mount.
- ▄︻┻┳═一 【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy & high strength steel in....
- ▄︻┻┳═一 With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment. Scope rings are for standard....
- ▄︻┻┳═一 Lifetime Warranty: 100% Satisfaction Guarantee.
Check Stock 
