Reviews Air Suspension Damper

DNM Mountain Bike MTB Air Rear Shock Rebound/Remote Lock Out/Air Compression Pressure Adjustable AL 7075 Shaft/AL 6061 Shock Body 210mm Travel 53 mm/w Extra Bushing Hardware

308g =0.68lbs (210mm). Remote lock out cable length: 1750mm=68.9inch..
COURTESY BUSHING HARDWARE INCLUDED: Top Busing Size : 8mm x 24mm. Bottom bushing size : 8mm x 24mm. We have included an additional set of bushing hardware (8mm x 50mm) to fit bikes with different suspension systems..
Weight 120 lbs - Main air chamber 90 Psi. Weight 140 lbs - Main air chamber 105 Psi. Weight 160 lbs - Main air chamber 120 Psi. Weight 180 lbs - Main air chamber 135 Psi. Weight 200 lbs - Main air chamber 150 Psi. Weight 220 lbs - Main air chamber 165 Psi..
ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide one year warranty ! Made in Taiwan..

Fit for Subaru Impreza WRX GC8 1993 1994 1995 1996 1997 1998 1999 2000 2001 GC8A GC8B GC8D GC8E GC8F GC8G.
Note: Please confirm your chassis is GC8 or....
Front Spring rate: 10 kg/mm (560 lbs/in).
Rear Spring rate: 6 kg/mm (336 lbs/in).
Adjustable Camber Plate: Yes (Front Only).
These coilovers are able to have their height adjusted without being taken out of the car, able to lower ride height by 1''-3'', allows user to have a....
Pillow ball top mount: This design helps combat noise while tuning and improves the steering feel and response.
Suspension lowering kit is a fast and....

Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring....
Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC....
INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal....
The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from....
Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are....

PRODUCT SPECIFICATION: Adjustments Rebound / Lockout / Air Pressure Adjustable, Damper shaft Dark hard-anodized AL-7075 Ø 10 mm (0.39 inch) shaft. Dark hard-anodized AL-6061 shock body.Riding style XC /TRAIL, Available Size Eye to Eye x Travel 165 x 35 mm ( 6.50 x 1.38 inch) 190 x 50 mm ( 7.83 x 1.97 inch) 200 × 55 mm ( 7.87 × 2.17 inch) Weight: 0.4 KG(0.88 Ib) for 165 mm Lenght.
EXTRA BUSHING INCLUDES: Top Busing Size 8mm x 24mm Bottom Bushing Size 8mm x 24mm, Includes extra bushing and hardware 8mm x 50mm Length. We Have Included An Additional Set Of Accessories To Meet The Different Size Requirements Of Some Customers Please see 2nd Pictures.
Rebound Adjustment Knob +direction Rotation Increase Damper (Slow),- Direction Rotation, Decrease Damper (Fast). Compression Adjuster + Direction Rotation Lock-out,- Direction Rotation Open Up.main Air Chamber Supply Air Pressure According To Pressure Meter.
Weight 120 lbs - Main air chamber 90 Psi, Negative air chamber 50 Psi.Weight 140 lbs - Main air chamber 105 Psi, Negative air chamber 50 Psi.Weight 160 lbs - Main air chamber 120 Psi, Negative air chamber 55 Psi.Weight 180 lbs - Main air chamber 135 Psi, Negative air chamber 65 Psi.Weight 200 lbs - Main air chamber 1....

The Listed size 12"x 8" is for inside duct opening measurement (duct hole), actual outside dimension is 13.75" X 10".
All plastic construction with 1/2" fin spacing for high air flow with rust proof feature perfect for areas with high moisture.
Three way air deflection design with bright white face and black damper in the back.
Multi-shutter damper with easy handle to adjust desired amount of air flow.
Two screw holes on each side with two screws included.

PRODUCT SPECIFICATION: Adjustments Rebound / Lockout / Air Pressure Adjustable, Damper shaft Dark hard-anodized AL-7075 Ø 10 mm (0.39 inch) shaft. Dark hard-anodized AL-6061 shock body.Riding style XC /TRAIL, Available Size Eye to Eye x Travel 165 x 35 mm ( 6.50 x 1.38 inch) 190 x 50 mm ( 7.83 x 1.97 inch) 200 × 55 mm ( 7.87 × 2.17 inch) Weight: 0.4 KG(0.88 Ib) for 165 mm Lenght.
EXTRA BUSHING INCLUDES: Top Busing Size 8mm x 24mm Bottom Bushing Size 8mm x 24mm, Includes extra bushing and hardware 8mm x 50mm Length. We Have Included An Additional Set Of Accessories To Meet The Different Size Requirements Of Some Customers Please see 2nd Pictures.
Rebound Adjustment Knob +direction Rotation Increase Damper (Slow),- Direction Rotation, Decrease Damper (Fast). Compression Adjuster + Direction Rotation Lock-out,- Direction Rotation Open Up.main Air Chamber Supply Air Pressure According To Pressure Meter.
Weight 120 lbs - Main air chamber 90 Psi, Negative air chamber 50 Psi.Weight 140 lbs - Main air chamber 105 Psi, Negative air chamber 50 Psi.Weight 160 lbs - Main air chamber 120 Psi, Ne....

Durable design means they will be an improvement to your motorcycle's suspension performance.
All steel double wall damper with multistage velocity sensitive damping.
High pressure gas charged for consistent damping performance.

Durable design means they will be an improvement to your motorcycle's suspension performance.
All steel double wall damper with multistage velocity sensitive damping.
High pressure gas charged for consistent damping performance.

Durable design means they will be an improvement to your motorcycle's suspension performance.
All steel double wall damper with multistage velocity sensitive damping.
High pressure gas charged for consistent damping performance.