Reviews Air Plasma Cutting Torch

WeldingStop 9-0093 9-0096 Plasma Electrode Tip for Thermal Dynamics CutMaster 42 Cutter SL40 Torch PK-40

  • These plasma electrodes and tips can fit Thermal Dynamics CutMaster 42 Cutter and SL40 Plasma Cutting Torch.
  • There are total 40pcs of plasma cutting SL40 torch conusables in the package.
  • The plasma electrodes and tips are replacement parts, NOT Thermal Dynamics Original plasma consumables.
Check Stock

WeldingStop Standoff Guide 9-8281 for Thermal Dynamic Cutmaster 38/52/82/102/152 Plasma Cutter SL60 SL100 Torch Consumables

  • The Standoff Guide 9-8281 used for Drag cutting.
  • the Standoff Guide 9-8281 need work with shield cap 9-8218.
  • The Plasma Standoff Guide can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
  • can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
  • The Standoff Guide can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
  • The standoff guide are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock

Plasma Cutter 110&220V 45Amp 1/2\ Clean Cut 3/5'' Max Cut Plasma Cutting Machiner,HF IGBT Inverter Portable Plasma Cutting Equitment for Aluminum Alloy Mild Steel Cast Iron

  • ...rials than standard DC plasma cutters. Cuts faster with less distortion in the workpiece.It is easy to ignite arc by adopting HF arc ignition.With IGBT inverter technology, It is long life and efficient higher than most machine. It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • ✅【Cutting Thickness】20-50A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V. 20-35A DC output: 1/3" ideal clean cutting and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation..
  • ✅【Wildely Application】This plasma cutting machine available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work,repair/maintenance,metal processing,manufacture ect,lightweight and portable,also suitable home DIY and industrial projects ..
  • ✅【Setup Simple】Automatic Dual Voltage Transfer / Dual Frequency (110/120 V 220/240 V 50/60Hz),With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional. Air post time adjust function, the adjustment range is 1-15seconds ,this function allow user adjust the time for post air to cool torch head effectivel....
Check Stock

PD0088-12 PD0019-12 Drag Tip Kit for Eastwood Versa-Cut 40amp Plasma Cutter Consumables 34pcs

  • 34pcs Plasma cutting consumables kit equivalent to Eastwood Versa-Cut 40amp plasma cutter PLTrafimet CB50 torch consumables, aftermarket replacement, not original.
  • PD0088-12 Plasma tip / nozzle x 10pcs, drag tip,diameter 0.047in / 1.2mm.
  • PD0019-12 Plasma tip / nozzle x 10pcs, diameter 0.047in / 1.2mm.
  • PE0007 Plasma air diffuser x2pcs,PC0003 Plasma outside nozzle x 2pcs.
Check Stock

Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm (CUT35 110V)

  • ✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine..
  • ✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 8mm in 110V 60PSI Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!.
  • ✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal..
  • ✤ The plasma cutter easy to cut stainless steel, Alloy steel, mild steel, Copper etc. Quality cutting torch PT31 come with machine, Max cutting thickness is 10mm at 40Amps 110V 60PSI..
  • ✤ Machine come with 110V power plug, We provide three years warranty for this unit..
Check Stock

Reboot Plasma Cutter Machine 50Amp Plasma Cutting Equipment CUT50D 3/5'' Cut 110/220V High Frequency 1/2'' Clean Cut,IGBT Air Plasma Cutting Machine for Aluminum Alloy Mild Steel Cast Iron

  • [Widely Application and Low Cost] 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation.this Plasma Cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture.
  • [SEE WHAT OUR CUSTOMER SAYS] I tried it on 120v with the air pressure turned way down on a piece of 1/8 angle iron the pilot arc worked as it should and it went through it like it wasn't even there. Next thing I tried it on was some roughly 3/8 wall tubing I needed to cut and notch for the safety cage on my figure 8 car..
  • [Generator Supported] This Plasma Cutting machine works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V,50A breaker for 110V.
  • [Blowing Back] Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and consumables.[110/220V Input ]Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • [Warranty] Buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.
Check Stock

PrimeWeld Plasma Cutting Table with Replaceable Slats, Plasma Cutter Table, Cutting Equipment, 32" H x 21" W x 30" L

  • Plasma Cutting Solution - The PrimeWeld Plasma Cutting Table offers you an industrial solution to a problem that most face when trying to cut material with their plasma cutter or gas torch. Using this table you can lay your workpiece over the support slats and make cuts with your plasma cutter or gas torch and not worry about what to use to support the back side of the material..
  • Sturdy, Carbon Steel Construction - The 250 pound capacity allows you to plasma cut or weld heavy plate steel. As an extra safety feature, the slag catch tray helps you to not worry about pieces falling to the floor..
  • Work At The Right Height - This slatted-top, steel cutting table is the place to support your workpiece while plasma cutting or welding. The dimensions are 32"H x 21"W x 30" L and are designed to let you cut and work at the perfect height..
  • Replaceable Slats - The PrimeWeld Plasma Cutting Table comes with 23 replaceable slats. The slat support spacing allows arcs and sparks from your welder or plasma cutter to penetrate the steel..
Check Stock

WeldingStop 9-0096 9-0093 Plasma SL40 torch for Thermal Dynamics CutMaster 42 Cutter 20pcs

  • Suitable for Thermal Dynamics CutMaster 42 Plasma Cutter (Ref. 1-4200) SL40 Torch (Ref. Code 7-0040).
  • 10 pieces x 9-0096 Plasma Cutting Electrode (NOT Thermal Dynamics 9-0096 Original).
  • 10 pieces x 9-0093 Plasma Cutting 40A Drag Tip (NOT Thermal Dynamics 9-0093 Original).
  • Nozzle Style: 40A Cutmaster 42 plasma drag tip.
  • These electrodes and tips are replacement parts which can be fit in SL40 torch, and these cutmaster 42 consumables are made by WS, not original.
Check Stock

WeldingStop Shield Cap 9-8218 for Thermal Dynamic Cutmaster 52/82/102/152 SL60 SL100 Plasma Cutter Torch Consumables PK-1[Black 9-8218 Level Up]

  • The Shield Cap 9-8218 used for Drag cutting.
  • the Standoff Guide 9-8218 need work with Standoff Guide 9-8281.
  • The Shield Cap can fit CutMaster 38 / 52 / 82 plasma cutter which work with SL60 plasma torch.
  • can fit CutMaster 58 / 60i plasma cutter which work with SL60QD plasma torch.
  • The Plasma Shield Cap can fit CutMaster 102 / 152 plasma cutter which work with SL100 plasma torch.
  • This 9-8218 Shield Cap are replacement parts which produced according to the standard size by WeldingStop, and not original.
Check Stock