Reviews Air Compressor Tank Pressure Relief Valve

Vertical 30 Gallon Portable Air Compressor - 5.5CFM, 2HP, 120V/240V, Single Stage, 1 Phase (Campbell Hausfeld VT6358) , Blue

  • 2.0 SCFM @ 90 psi of the portable air compressor allows for quick compressor recovery time, per ISO1217.
  • 1.5 gallon tank in shroud of the electric air compressor is easy to carry, includes water drain valve and rubber feet.
  • 150 psi max tank pressure of the PORTER-CABLE air compressor stores more air in the tank for longer tool runtimes.
  • Durable oil-free pump for long life and no maintenance.
  • Low Amp 120V motor starts easily in cold weather or with extension cord.
  • Low Noise at 79 dBA (Tested per ISO3744) for a quieter work environment.
  • Fully enclosed design provides protection from hot or moving parts.
  • 25' coil hose and 8 pc accessory kit facilitate a number of inflation tasks.
Check Stock

Air compressor pilot unloader valve with muffler Vent Rolair 131B 125-150 psi

  • ✅【Product Description】This is a pressure switch, control valve with a single port connection manifold. Air compressor pressure switch is similar to the regular single port pressure switch, but this switch is equipped with heavy duty 26A contacts to provide a longer lasting switch in demanding applications..
  • ✅【Pressure Switch Features】Air compressor switch is a universal pressure switch replacement, convenient to replace the broken one..
  • ✅【Excellent Material】100% Brand new and high quality. Pressure switch control valve is Made of high quality material, with long mechanical life..
  • ✅【Specifications】Type: pressure sw....
Check Stock

TCP Global 10 Gallon (38 Liters) Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid, Caster Wheels, Regulator, Gauge - Use for Curing Resin in Casting Molds

  • Professional heavy-duty 10 gallons (38 liters) capacity pressure pot tank for resin casting. The tank has a maximum operating pressure of 50 PSI. Holds the air pressure constant at your regulated air pressure setting during the whole casting mold resin curing process..
  • The pressure pot tank is constructed with heavy gauge steel and has a durable easy to clean powder coating. It has a 14.5″ inside diameter and is 17″ deep, so it has a large enough capacity to accommodate almost any casting project. Includes 4 removable caster wheels..
  • Tank has a clamp-on lid with an airtight sealing gasket. The lid has an air pressure regulator with air inlet shut off ball valve, air pressure gauge from 0 to 100 psi, safety air relief valve and an air release outlet cock valve..
  • The ideal pressure pot tank for inserting resin casting molds and holding them under pressure so that you can make high quality virtually bubbleless resin castings..
Check Stock

BIG RED T88011 Torin Portable Horizontal Air Tank with 50' Hose, 11 Gallon Capacity, Red

  • Capacity: 11 Gallon | Dimension: L x W x H 23.6" x 11.8" x 14.6" | Maximum Allowable Working Pressure: 125 Psi.
  • Integrated with safety pressure bypass valve with manual override and air gauge displaying pressure in Psi and Bar.
  • Equiped with 4 feet long industrial grade 1/4 inch male NPT air hose with standard tire chuck.
  • Fitted with Shut-off valve on input allowing tank to be filled and disconnected from compressor without draining itself out.
  • Includes limited 1-year manufacturer warranty.
  • Built-in pressure release valve for safety.
Check Stock

Wadoy Central Pneumatic Air Compressor Pressure Switch Control Valve Replacement for Parts 90-120 PSI 240V

  • H/D PRESSURE SWITCH AIR COMPRESSOR 145-175 4 PORT 26 AMP w/ Gauge & Pop off valve 0-200 PSI Pressure Gauge 200 PSI Pop off valve.
  • efoo AIR COMPRESSOR CONTROL VALVE LF10A-H4,Four port, 145-175 PSI 26 AMP AMP RATING: 26 AMPS SINGLE PHASE OR THREE PHASE, 110/230.
  • Air Compressor Pressure Switches · For all global air compressor applications. · LF 10A Four Port Series (LF10A-L4) · UL Listed and CSA Certified. · DPST switch · Rated 26 Amps · Temp. range: -22° to 257°F.
  • Pressure Switch, Air Compressor, Standard Action, Factory On/Off Set 145-175 PSI, Pressure Range 35 to 150 PSI, Burst Pressure 500 PSI, Port Type 4-Port 1/4 In NPT (Female), 1/4" Compression Unloader, Diaphragm Actuation Type, Manual Switch Action Auto/ Off, Single Phase, DPST Contact Type, 26 Amps, NEMA 1 Enclosure, Temp Range -22 to 257 F, Standards UL/CSA.
Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • Each time your compressor runs, the moisture in the air condenses in the tank. This moisture must be drained daily from the tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank..
  • The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
  • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
Check Stock

SuperHandy Air Compressor 6.3 Gal Tank Fill in 150 seconds Max 120 PSI Ultra Quiet, Oil Free, Mechanical Pressure Gauge, Heavy Duty Steel Tank for Tire Repair, Construction, Nail Gun, Pneumatic Tools

  • SPECS and CAPABILITIES - This ULTRA-QUIET Air Compressor and Tire Inflator, 1HP 6.3 Gallon Tank runs at a lower RPM (1700).
  • This unit has a 1/4" inch NPT Quick Connect Coupler and a reliable Mechanical Pressure Gauge to monitor the PSI range. Time to Fill Tank 150 seconds.
  • OUTPUT 3.0CFM @ 40PSI OUTPUT 2.2CFM @ 90PSI.
  • SUPER DESIGN - This unit uses a highly efficient maintenance-free Electric Brushless induction motor resulting in longer motor and pump life, capable of producing consistent performance at all times of operation with super fast Inflation.
  • Our ULTRA-QUIET design produces a mere 60dB of sound during peak operation, making if comfortable to use without damaging your hearing..
  • HANDY FEATURES - Equipped with a Safety Valve for easy and fast depressurizing, also including a Drain Valve for the releasing moisture build up in the tank to prevent corrosion (air hose not provided).
  • Outfitted with commercial grade rubber suction cups that grip to both smooth and textured services and Ergonomic Grip Carry Handle for easy moving/portability.
  • BEST APPLICATION - (DO NOT use tools or the unit over the Max 120 PSI capability) Great for Job Site/Construction work use of pneumatic air tools like drills, saws, grinders and nail guns,also suitable for inflating....
Check Stock

Supco SPP5 Hard Start Kit, AC Compressor

  • Efficient Performance: 10 gallon ultra large tank and 175 psi max tank pressure stores more air in the tank for longer tool run times.
  • Powerful Motor & Pump: 120V/60Hz, 15A,1.8 HP, UMC motor, 4 SCFM at 90 psi, 5.0 SCFM at 40 psi allows for quick compressor recovery time, it is enough to make it easily drive a variety of industry and household equipment.
  • Sturdy & Durable & Portable: The 10 gallon air compressor is made by high quality Q235B steel, oil-free pump for long lifetime and no maintenance. 2 big rubber wheels with hand carry, easy to move. noise level 80 dBA noise level for operational work environment.
  • Multifunction: This air compressor is designed for garage, jobsite and workshop, etc. Perfect used for inflating, cleaning, stapler pinner, brad/finishing nailer, roofing nailer, wrench, drill, paint sprayer, caulk gun, chisel and other tools.
  • What you get: 1 x 6 feet cord, 1 x ball drain valve, 1 x plastic filter, 1 x quick coupler, 2 x rubber wheels, 1 x user's manual, 1 year limited warranty.
Check Stock

DEWALT FLEXVOLT 60V MAX* Air Compressor Kit, Cordless, 2.5 Gallon (DCC2560T1)

  • ..., saws, grinders and nail guns,also suitable for inflating high pressure tires on cars, SUVs, trucks, motorcycles and bicycle, sports balls and more (this unit DOES NOT SUPPORT heavy duty truck tires, like industrial tractors or semi-trucks), ideal for both indoor/outdoor use.
  • SAFETY and PROPER USE - Air tank of the compressor should be drained daily for safe and best optimal performance (DO NOT leave the battery plugged into the compressor when the unit is not in use) (DO NOT disconnect the air hose/tool until the you confirm the pressure gauge reads (0) psi (DO NOT use for deflation, ONLY for inflation).
Check Stock