Reviews Advanced Chisel Set

Buck Brothers 120103BC 1/2 Inch x 5 Inch Professional Wood Chisel, Woodwork Chisel, For Woodworkers Tool Set, For Wood Chisel Sets, Carpentry Tools

  • DURABLE BLADE: Never worry about the construction of our wood chisels.
  • This wood carving tool is crafted from high-grade tempered tool steel for optimal strength, durability, and power.
  • This tool is a great addition to your chisel set.
  • DURABLE HANDLE: The handle of our steel chisel is composed of shatter-resistant acetate and features steel capped ends to stand up to repeated mallet strikes.
  • The mortising chisel is a great bonus to any woodworking chisel set.
  • VERSATILE TOOL: These wood working chisels can be used to make finish or paring cuts on wood surfaces, as well as cut mortises.
  • These wood carving tools are also suitable for most soft wood, hard wood, and laminated wood products.
  • PRECISELY HONED AND SHARPENED: The mortise chisel blade already arrives very sharp and can be easily sharpened if dulled by continued use.
  • No matter how much you use these carpenter tools, you can count on them to keep working.
  • USE WITH BOTH HAND AND MALLET: To make cuts with this small wood chisel, you don’t even need a wooden mallet.
  • If you need a deeper cut though, the steel caps on the handles will allow you to do that by striking the chisel with a wooden chisel mallet.
Check Stock

Buck Brothers 120105BC 3/4 Inch x 5 Inch Professional Wood Chisel, Woodwork Chisel, For Woodworkers Tool Set, For Wood Chisel Sets, Carpentry Tools

  • DURABLE BLADE: Never worry about the construction of our wood chisels.
  • This wood carving tool is crafted from high-grade tempered tool steel for optimal strength, durability, and power.
  • This tool is a great addition to your chisel set.
  • DURABLE HANDLE: The handle of our steel chisel is composed of shatter-resistant acetate and features steel capped ends to stand up to repeated mallet strikes.
  • The mortising chisel is a great bonus to any woodworking chisel set.
  • VERSATILE TOOL: These wood working chisels can be used to make finish or paring cuts on wood surfaces, as well as cut mortises.
  • These wood carving tools are also suitable for most soft wood, hard wood, and laminated wood products.
  • PRECISELY HONED AND SHARPENED: The mortise chisel blade already arrives very sharp and can be easily sharpened if dulled by continued use.
  • No matter how much you use these carpenter tools, you can count on them to keep working.
  • USE WITH BOTH HAND AND MALLET: To make cuts with this small wood chisel, you don’t even need a wooden mallet.
  • If you need a deeper cut though, the steel caps on the handles will allow you to do that by striking the chisel with a wooden chisel mallet.
Check Stock

Sabre Tools SDS Plus 4-Piece Chisel Set, Thinset Scraping Bit 3” x 10” Thinset Scaling Chisel, Point Chisel, Flat Chisel, Wide Chisel - SDS Chisel Bits for Hammer Drills – Tile Removal

  • 4-Piece SDS Plus Chisel Set - Includes: Thinset Scraping Bit 3” x 10”, Point Chisel, Flat Chisel 3/4” x 10”, and Wide Chisel 2” x 10”.
  • Our high quality SDS Chisels are designed to work in masonry applications.
  • brick, stone, concrete, block, stucco, thinset, tile, etc.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • Extreme durability: Heat-treated high-quality steel ensures excellent strength and unmatched longevity.
  • Wide application: Our SDS Chisel Set has a wide set of uses from light chipping and scraping to more difficult chipping applications.
Check Stock

Prismacolor Premier Colored Pencils, Soft Core, Landscape Set, 12 Count

  • Dual ended markers featuring both fine and chisel tips.
  • Advanced ink formulation for richly saturated color and superior blendability.
  • Fine point lays down sharp lines while the chisel tip creates multiple line widths.
  • Single source of ink guarantees color consistency at both ends.
Check Stock

Punch And Chisel Set, 16 Pieces- Includes Taper Punches, Cold Chisels, Pin Punches, Center Punches, Chisel Gauge, and Storage Case- By Stalwart

  • MULTIUSE TOOL SET- The 16 piece punch and chisel is a must have for artists, woodworkers, carpenters, metal workers, automotive work, and home DIYers. Ideal for working with wood, metal, cars, sculpture, carving detail into cabinets, moldings, dressers, wood furniture and more!.
  • DURABLE-  Stalwart’s chisels and punch tools are made from heat treated chrome vanadium steel construction with 54~58 HRC hardness. The chisel set can be used multiple times without worry of dulling or wear from use..
  • EASY TO STORE AND CARRY- The cloth roll up carry and storage pouch will keep your chisel and punch set safe, secure, and organized until your next use. The carry case also makes for easy transport and storage of the tools..
  • SET INCLUDES-  The 16-piece set consists of 5 taper punches.
  • 3/32”x5 1/4”, 1/8”x 5 ¾”, 5/32”x6”, 3/16”x 6 ¼”, 1/4”x 6 ¾”. 3 Cold chisels: 3/8”x 5 ½”, 1/2”x 6”, 5/8”x 6 ½”. 5 Pin punches.
  • 3/32”x 4 ¼”, 1/8”x 4 ¾”, 5/32”x 5”, 3/16”x 5 ¼”, ¼”x 5 ¾”. 2 Center punches.
  • 1/8”x5”, 3/16”x 6” and 1 chisel gauge. Hardness 54~58 HRC..
Check Stock

6-Piece Chisel Set for SDS Plus Bits Tile Grooving Scraping Flat Point Scaling Chisels Hammer Drill Tool Set for Tile Masonry Concrete Brick Stone Work 40Cr Steel Drill Bit Set w SDS Plus Shanks

  • ALL-in-ONE: This multifunctional 6-piece chisel set includes a tile chisel, grooving chisel, scrapping chisel, flat chisel, point chisel, and scaling chisel so that you're ready to work on any material from ceramic tile to concrete, brick and masonry to real and artificial stone, even granite.
  • SDS PLUS SHANKS: These drill bits slot perfectly into your SDS Plus hammer drill regardless of manufacturer, whether Bosch, DeWalt, Makita, Milwaukee, Hilti, or other.
  • NON-SLIP: Our handles are crafted for tight non-slip use, with powerful torsion resistance to give you a longer service life even under punishing use.
  • HEAVY-DUTY: This SDS Plus drill bit set is made from high-quality chromium steel that has been drop forged and then heat tempered to give you strength and long-term corrosion resistance.
Check Stock

Prismacolor 3722 Premier Double-Ended Art Markers Fine and Chisel Tip 72-Count

  • Dual ended markers featuring both fine and chisel tips.
  • Advanced ink formulation for richly saturated color and superior blendability.
  • Fine point lays down sharp lines while the chisel tip creates multiple line widths.
  • Single source of ink guarantees color consistency at both ends.
Check Stock

Makita 3 Piece - SDS-Max Chisel & Point Bit Set for SDS Max Rotary Hammers - Heavy Demolition for Reinforced Concrete & Tile

  • ✅ Makita's 3-Piece SDS-MAX Shank DEMOLITION BIT Set with Steel Case For SDS-MAX Chuck ONLY Rotary Hammer Drills with dedicated 3 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Point Bit, Flat Chisel & Scaling Chisel for EASY Demolition into all your Reinforced Masonry, Concrete, Brick, Tile & Cinder Block application.
  • ✅ 4 Piece SDS-Max Shank Demolition Set includes: 1 Heavy-Duty Carrying Case + 1 Point Bit of 15" + 1 Flat Chisel Bit of 15” x 1" Wide + 1 Scaling Chisel Bit of 15" x 2” Wide | Engineered in Japan for optimal use with Makita SDS-Max Rotary Hammer while also fully compatible with All SDS-MAX Rotary Hammers.
  • ✅ EASILY Demolish concrete, brick, and masonry LONGER & MORE PRECISELY with Makita’s HARDENED, Single, Cold-Steel Piece Bits with industry-leading Tungsten Carbide & Steel Bit Integrity for unmatched LONG LIFE, SAFE Chiseling & RELIABLE Demolition | Each Premium Makita bit is uniquely forged and heat-treated, designed for chipping, scaling and large area surface removal.
  • ✅ AVOID LOWER PRICED & lower quality Chisel and Point bits that prematurely wear and strain the powertool, resulting in high bit consumption rate, project completion delays, ineffective demolishing and making the overall chiseling much more difficult | ....
Check Stock

WORKPRO W043001 1/2” Wood Chisel – Wood Carving Chisel with Heavy-Duty Design, Hardened and Tempered Steel Blade, Woodworking Chisel for Use with Hammer or Mallet , Zinc

  • WOOD CHISEL – Need a wood chisel that holds its edge while working? The WORKPRO ½” wood chisel is what you’re looking for. With a durable design, this wood chisel tool will help you achieve a variety of projects.
  • HEAVY-DUTY DESIGN – Forged of hardened tempered steel, this heavy-duty chisel holds its edge and the blade stays sharper on soft, hard and laminated wood.
  • ERGONOMIC GRIP – The full-sized ergonomic handle grip means this chisel for woodworking fits comfortably in your hand, even when using for an extended period of time.
  • PROTECTIVE BLADE – A protective blade guard is included to keep the chisel blade edge sharp, meaning less time tuning the blade and more time to work on your project.
  • DURABLE STEEL CAP – The durable steel butt is designed for heavy pounding with a hammer or mallet. Complete your woodworking chisel set with this 1/2” wood chisel.
Check Stock