Reviews Adjustable Tablet Arm Mount

Mippko Tablet Holder for Microphone Stand and Mic Music Stand, 360° Swivel Tilt Aluminum Alloy Mount, Adjustable Clamp Fits 4.7~12.9 " iPad/ Samsung Tab / Nexus / LG G Pads / e-Reader / iPhone

  • ...d equipped with built-in anti-skid rubber inside, non-slip, increased friction and reduced scratching, more stable and secure. One 1/4 threaded hole and one 3/8 threaded hole is clamp feature, jaw opens to max is 1.77" /44 mm and minimum is 0.39" / 10mm,clamped on the poles diameter is between max and min..
  • 【Angle Adjustable】: Articulating arm has 2 stainless steel ball heads at each end of arm,allowing to 360° rotation and 90° tilt freely, twisting control knob to change articulating arm position for ball heads tighten or loose, you can adjust any angle of devices relax..
  • 【Install & Portable】: Tablet stand installation is simple and without any tools to help,microphone stand tablet bracket is lightweight about 320 g / 11.3 oz, put it in backpack to carry easily due to small size, only the arm mount clamped on the smooth of pole,it’s very convenient..
  • 【Compatible】: Tablet clamp can be pulled up and pulled down different sizes to compatible with all 4.7~12.9 inches tablets:e-Reader,iPad Air 2/3/4/5/6, iPad mini 2/3/4/5/6/, iPad Pro 9.3/10.5/11,iPad2019/2020/2021,Samsung Galaxy Tab A7/A8/A10/S7/S8, Google Nexus7/8/9/10/11,LG G Pads/7.0/8.0/ 8.3.iPhone 14/14 Pro/14 Pro Max/14 Plus, iPhone 13/13 Pro/13 Max/13 Pro Max/Mini,iPhone 12 /12 Pro/M....
Check Stock

DURABLE Tablet Holder Wall/Cabinet Mount (for Tablets 7-13 Inches, 360 Degrees Rotation with Anti-Theft Device) Silver/Charcoal (893523)

  • Compatibility: From kitchen cabinets for recipes/instructions, counters for point of sale interactions, to tables for trade shows, your DURABLE Tablet Holder Wall/Cabinet Mount is the perfect solution. Compatible with any iPad or Tablet size ranging from 7" to 13" and is suitable for all tablet thickness up to .314" (8 mm). Depending on the tablet edge radius, it can also be suitable for depths above .314" (8 mm)..
  • Cable Management: opening in the support arm allows for easy connection to power supply..
  • Worry-Free Protection: Includes two lockable holding arms on either side to secure the tablet in place for anti-theft protection (key included)..
  • Easy to Use: For easy insert and removal of the tablet, your DURABLE tablet holder wall/cabinet mount features rubberized surfaces protect the tablet from damage..
  • Adjustability: Includes an easily adjustable rotation of 360° with locking points at 90° so it can be used in landscape or portrait format. It also features a pivoting range of 0° to 88°..
Check Stock

Arkon Mobile Grip 2 Phone Holder for iPhone 7 6S Plus 6 Plus 6S 6 5S Galaxy S7 S6 Note 5 Retail Black

  • ...s, helicopters, cars, trucks, big rigs, RVs, motor homes, boats, or anywhere else you have a flat surface. Shock tested and certified to hold up to a force of 20 Gs. The quick release mechanism allows for easy repositioning or removal, making it perfect for owners and renters alike..
  • INFINITELY ARTICULATING AND ADJUSTABLE: The ball and socket end joints and ratcheting center make the arm adjustable to any position, creating the perfect heads up viewing of your device. The arm has three independent joints, all adjustable and lockable from the single, centrally located, control knob. The suction cup attachment is a separate lockable joint. You are no longer limited to a fixed length or a limited rotation. The mount is extendable to 10.5” and retracts to as little as 3.25”..
  • HEAVY-DUTY WHILE BEING COMPACT AND LIGHT-WEIGHT: The aircraft-grade aluminum and stainless steel construction provides a rocksteady, vibration-free platform for your iPad, iPhone, phone, tablet, GPS, camera, ELD, or other device. When removed, the mount is portable and can easily fit into your flight bag as it only weighs 13.8 oz..
  • GEN 3 SPORT ADAPTER at the end of the arm, which quickly connects to any MYGOFLIGHT device holder. The MGF Sport Cases are available in different s....
Check Stock

Cuxwill Car Cup Holder Tablet Mount for 4-13" iPad & Phone, Universal Truck Cup Tablet Mount with Adjustable Arm for iPad Pro 12.9 9.7 Air Mini, Samsung Galaxy Fold 4 3, Kindle Fire HD, iPhone etc

  • 【2022 Upgraded-Latest Version】: With the 2022 upgraded latest durable and sturdy long neck design, makes it much more flexible(with 2 adjustable knobs) and longer(Up to 11"), two adjustable knobs and 360° rotation top of the pole allow you to set car tablet holder at a comfortable and safe height and not block the dash or gear shifter. Unlike other gooseneck, when it got hot it fall over like a limp noodle, our high quality and solid pole never break or shake..
  • 【Upgraded Adjustable Expandable Long Arm】: This new car cup tablet mobile phone stand for in-vehicle cup holders adapts an expandable neck for height adjustment. This cup tablet holder can be freely expanded and contracted from 8.66 to 11 inch (22~28cm) in length. A joint arm for easy 270 degree adjustment and a flexible ball joint for a 360 degree rotation design can provide the best viewing angle..
  • 【Upgraded Wider Expandable Base】: The upgraded adjustable base can be extended from 2.56 to 4.06 inches (6.5~10.3cm). to fit all car, SUV, truck, and golf cart, treadmill, massage recliner cup holders. Meanwhile, The weighted base with three extensions and non-slip silicone, forming a triangular....
Check Stock

UYODM Drill Base Tablet Wall Mount Holder for 7"~12.9" iPad/Samsung Galaxy Tabs/Google Nexus7-11/Fire HD/e-Reader/LED Clock/iPhone/Smartphone,360°Rotation Aluminum Alloy Magic Arm and Adjustable Clip

  • 【Excellent Design】: Tablet mount has two ball heads at end of arm, one end with a 1 / 4 " threaded to connect tablet clip,it has a flexible adjustment and locking system,the ball heads will be unlocked by twisting down the elbow knob,the ball can be 360 ° rotation and 90° tilt easily,also the same as another one with base, you can adjust any angle of tablets to capture the best viewing, then twist elbow knob up to keep it locked in place..
  • 【Material & Stable】: This tablet stand arm material are aluminum alloy,stainless steel and high-end aluminum polishing,the durable material ensures tablet holder stable and sturdy.The tablet clip has a built-in anti-skid rubber pad to increase friction and reduce scratches for tablets and cellphones, it can be stretched to both sides and clamped tightly. 10 inch (25.4 cm) length arm can load a maximum weight of 1 kg /2.2 lbs,you do not worry about your tablets and cellphones fall off..
  • 【Compatible】: Tablet holder clip can be adjusted 7 ~ 12.9 inches, compatible with tablets ( iPad Air 2, iPad Pro 9.5, iPad Pro 10.5, iPad Pro 11,iPad Pro 12.9, iPad mini 4, iPad2019/2020, Samsung Galaxy Tab S7, Samsung Galaxy ....
Check Stock

Fleximounts 2 in 1 Desk Laptop Monitor Mounts for 10-27 inches LCD Screen or 10-17.3 inches Notebook (for Laptop, Desk Mount)

  • LAPTOP TABLET TRAY: Secure almost any laptop or tablet on the market. Extendable grips and adjustable slider match your devices perfectly. Cooling tray keeps your device from overheating so it operates at maximum efficient temperatures. Sturdy construction ensures it will hold your device in place.
  • FULLY ADJUSTABLE: Move your mount stand vertically for height adjustments or left or right. Hand control your tray with grip up to 180 degrees vertically and 360 degrees horizontally. Create ergonomic typing positions to make working more comfortable. Collapse your mount in seconds for storage at your feet or under your seat.
  • LOCKING: Adjust the laptop tray and arm with two quick-release levers and knob screws. Move your mount around in nearly any direction in a matter of seconds. Tighten the knobs and joints by hand to ensure a completely stable device. The laptop or tablet will not bounce or sag when properly mounted.
  • CONSTRUCTION: Built from the most stable materials on the market. The sturdy aluminum arms are capable of supporting most laptops and tablets with ease. The adjustable grips and mounting bracket can hold your devices.
  • UNIVERSAL: Mounting bracket can attach to large vehicles, vans, trucks, minivans, and some sedans. Check photo to see if your ve....
Check Stock

McKleinUSA Logan Pebble Grain Calfskin Leather 17" Leather Two-Tone Dual-Compartment Laptop & Tablet Backpack Black (19082)

  • ... to the most comfortable position,monitor mounting arm offers 145 degree tilt, the maximum extension length up to 52cm/20.5", reach the height of 43cm/16.9", Laptop or Tablet mounting arm offers 45 degree tilt, the maximum height up to 42cm/16.5"..
  • ️HEIGHT ADJUSTABLE OR MOUNTED:Height adjustable from 90-360 in Rolling laptop desk at any angle you want The item can be mounted onto everywhere desk, Bed side, anywhere it can clamp upto 2.5 inch thickness flat edge, Rotating 90 to 360 laptop stand at any angle you want..
Check Stock

OHLPRO Tablet Holder Car Air Vent Mount, Universal Dashboard Windshield 2-in-1 Cradle TPU Suction Sticky Gel for iPad/iPad Mini Samsung Galaxy Size 6"- 10.5" All Tablets (Black)

  • [Vast Compatibility] Utilizing an adjustable loading button and a revolutionary spring locking system for most 7-12.4 inch tablets: iPad 2021 2020 2019 2018 2017 9.7" 10.2", iPad mini 6 5 4 3 2 1, iPad Pro 9.7"/10.5"/11", iPad Air 4 3 2 1, iPad 9 8 7 6 5 4 3 2 1 ▶ Samsung Galaxy Tab S7+ S7FE S7 S6 S5e S4 S3 S2 S E A 4 3 2 Pro (7-12.4"), etc /// tablet mount for car, tablet mount for truck, ipad holder for car, ipad car mount, car tablet holder, tablet car mount, ipad car holder, car ipad holder.
  • [Also A Suction Cup Phone Mount] Works for nearly any cell phone, such as iPhone 13ProMax 13Pro 13 13Mini 12ProMax 12Pro 12 12Mini 11 XSmax XS XR X 10 8+ 8 7+ 7 SE 6S+ 6S 6+ 6 5S 5, Samsung Galaxy S21+ S21 S20 S20+ S10 S10+ S10e S9 S9+ S8 S8+ S7 S6, Z Fold 3 2 1, W22 W21 W20, Note 20 Ultra 20 10 9 8 6 5, A91 A90 A80 A72 A71 A70 A60 A52 A51 A50 A42 A41 A40 A30 A32 A31 A22 A21 A20 A12 A11 A10 A02 A01, Google Pixel 6Pro 6 5a 5 4XL 4 3XL 3, and more. ▶Cable hole design, good for charging your phone..
  • [Flexible Long Arm] Premium extra lengthens long arm made of thick rubberized Aluminum pipe up to 13 inches, make your tablet/cell phone close to y....
Check Stock

iBOLT TabDock Bizmount AMPs - Heavy Duty Drill Base Mount for All 7 - 10 Tablets iPad Samsung Tab Great for Commercial Vehicles Trucks and Wall Mounting- Features 1 inch / 25mm Ball Joint

  • ...ere you mount it. Place your tablet in a horizontal position, clamp the holder into place then rotate it to a horizontal or vertical position..
  • UNIVERSAL DESIGN - fits all Tablets 7"-10". ( iPad , Nexus , Sony Xperia , Kindle , Samsung Galaxy Tab ). This kit includes: TadDock tablet Holder, 5” dual ball joint adjustable pedestal, screw pack and adhesive for drill base. Features 1-inch / 25mm / B Size Ball joints that are compatible with all industry standard 1 inch / 25 mm / B size adapters and arms..
  • GREAT FOR BUSINESS OR PERSONAL USE - Works with most smooth surfaces, in a vehicle or a building. Has 2 adjustable points for optimal viewing positions. The TabDock Bizmount AMPS is great for business, homes, vehicles, or schools..
  • ADJUSTABLE - Rotates 360 degrees for optimal viewing positions. The 2 adjustable points offer freedom to completely adjust the arm to the optimal viewing position..
Check Stock