Reviews Adjustable Jack Screw

ROGTZ Electric Car Jack kit 5 Ton 12V Car Jack Hydraulic Jack with Impact Wrench and Tire Inflator Pump, Car Lift Floor Jack for SUV Sedans Tire Change with LED Light (Black)

  • ...max height(lifting height range:6.1~17.7 inch) .The inflator pump in storage box takes 2 min for inflating(35L/Min) the replaced tire.Build-in warning flash light and LED light enables operation at night,no need to buy additional lighting tools..
  • √Usage electric impact wrench NOTES: One:2 sleeves are available for screws of 4 sizes, pay attention to the sizes when selecting the sleeve.
  • Two: The left side of the power switch marked "II", means loosening the screw. Press "II" and keep holding until the screw has been loosened, remove the nuts.The right side mark "I", means tightening the screw.Same way, keep the "I" side pressed until the screw has been tightened.
  • √SAFE AND SECURE TO USE:Our electric hydraulic jackis will automatically stop working after reaching the height limit.The jack head uses a non-slip design:a cross-shaped groove plus particles protruding from the surface to increase friction.The self-locking fully enclosed design,completely waterproof,no oil leakage,to ensure safety during use..
  • √MATCH MOST VEHICLES:The electric jack kit 's two-way power supply (battery clip with 12V DC power socket or car cigarette lighter) allows any adult to change and repair tires at any time on the garage/highway,best choice for your car, truck or SUV.....
Check Stock

Ellis Manufacturing Company - Light Duty Steel Shores & Jack Post - 37 - 61 Range of Adjustment - 12,000 lb Safe Load Capacity - Adjustable Jack for Temporary or Permanent Support

  • LIGHT DUTY STEEL SHORE: The Ellis Light Duty Steel Shore is an adjustable support jack that provides temporary or permanent support. This functional....
  • EASY TO USE: Simply turn the wing nut to adjust the height. Once the desired height has been reached use a 6mm Allen wrench to tighten the set screw....
  • SAFE & SECURE: Built with high quality materials, this adjustable support jack is extremely powerful and long-lasting. The light duty steel shore is a....
  • SPECIFICATIONS: Weight 31 lb, Range of Adjustment: 37" - 61", Safe Load Capacity: 12,000 lbs, Wing Nut: 8.75" Long Galvanized, Top Plate: 3/8x 6/6"....
  • TRUST IN ELLIS: Ellis Manufacturing Company has been a leading manufacturer of construction materials since 1951. Our primary focus has always been on....
Check Stock

K Tool International 22 Ton Blue Air Hydraulic Truck Jack Welded Pump Wiper Seal on Ram 3 Adaptors Air Pressure 100-120 PSI KTI63197

  • [22-TON CAPACITY] - K tool International hydraulic jack rated to lift up to 22 tons or 44,000 lbs..
  • [TRUCK JACK SPECS] - Minimum Height: 8 2/3".
  • [WIPER SEAL] - Wiper seal on the ram for longer life in extreme environments.
  • [RELEASE KNOB] - Release Knob At the Top of the T Handle Works At Any Handle Position. 3 handle positions allows for easy storage and jack positioning.
  • [STRONG/DURABLE] - Heavy duty truck jack has a welded pump and reservoir for added strength and durability. Heat treated extension screw for extra....
Check Stock

Poyiccot 3.5mm Speaker Wire Adapter, 3.5mm (1/8") 4 Pole Stereo TRRS Male Jack to AV 4 Screw Terminal Block Balun Connectors Cable 30cm (3.5mm M/ 4pin)

  • Speaker Wire to 3.5mm Cable with Connectors 1: 3.5mm 1/8" TRRS (4-Pole) Male jack, Connectors 2: AV 4-Pin Screw Terminal Block jack,please note: Did not when when attached to wifi projector.
  • 3.5mm screw terminal cable,connecting single wires with open cable heads to your 3.5mm jack..
  • 3.5mm 1/8'' trrs cable, it has four total conductors - three signal and a ground as opposed to a more common stereo jack's two..
  • No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. Wiring diagram: PIN 1 - red wire.
  • PIN 4 - black wire. OMTP standard: PIN1 - Left channel.
  • PIN 4 - Ground. CTIA standard: PIN1 - Left channel.
  • 3.5mm trrs plug cable is more convenient to use more quickly without welding, and you can use the 22-18 gauge to connect..
Check Stock

Mautyke Electric Car Jack Kit 2 Ton Auto Scissor Jack Lift Portable Air Floor Jack Tire Jack Vehicle Repair Tool Quick Car Lift with Carrying Case

  • ...d place it in the direction parallel to the car.②Keep away when the jack is working.③Do not exceed the max. load capacity. Using GuideStep 1: Get power from the car, connect the cable (make sure the positive and negative poles are correctly matched, otherwise there will be button failure, abnormal noise or screw bending). Step 2: Choose the right jack head. Step 3: Press the (^) button to lift the car and the (v) button to lower it..
  • Best Choice for Tire Change: This electric car jack is made of cold-rolled steel which has excellent bearing capacity, it has also been updated with an extra-wide base and reinforced solid screw rods to avoid being cracked or twisted. This electric floor jack also features a bright built-in LED light, which makes changing tires much easy in the dark. 2 heads fit both sedans and SUVs of different chassis heights, vehicles under 2 tons can be lifted easily..
  • Safety Guarantee: When the car jack reaches the maximum height, it will stop working automatically. The protruding particles on the top of the jack head can increase the friction. The self-locking structure of the jack can prevent the car from falling suddenly and ensur....
Check Stock

Smartphone Video Microphone Kit with LED Light,Phone Holder,Tripod Vertical & Horizontal Vlog YouTube Filmmaker Video Kit for iPhone 7 8 X XS MAX 11 Pro Samsung Huawe

  • Vertical & horizontal: This Phone Holder allows your phone to be in Vertical or horizontal. In either situations, there is a 1/4 screw and cold shoe mount for the microphone and LED light..
  • Professional MIC: The cardioid microphone with a professional shock mount is super shielded and anti-interference.
  • Tripod: This handheld table tripod have adjustable legs (3 level heights), it also has a swiveling ballhead for various angles..
  • LED Light: Lightweight but super bright, adjustable brightness.Universal fit, it has 1/4 screw and cold shoe mount..
  • NOTICE: This microphone supports all smartphones that come with 3.5mm audio input jack. Iphone 7 and above versions need to use original 3.5mm-lightning adapter. The adapter is not included ..
Check Stock

Torin T90413 Big Red Hydraulic Bottle Jack with Carrying Case 4 Ton 8,000 lb Capacity

  • Hydraulic bottle jack designed for residential and commercial use.
  • Wide, rugged base enhances stability and strength.
  • Meets ASME safety standards. Product Dimensions (LWH) for jack and storage case- 7.4 x 4.72 x 11.02 inches.
  • Features a lifting range of 7-1/2" to 14-5/16"" with a 4 ton (8, 000 lb) capacity.
  • Adjustable screw top extension adds versatility.
  • Engineered using a drop forged alloyed steel construction with reinforced stress points for added durability.
  • Inner/outer welded structure delivers leak-free performance.
  • Smooth, glide-action pressure pump is designed to lift with minimal effort.
  • Hydraulics are powered with a high-quality oil, offering corrosion resistance.
  • Serrated, heat-treated saddle provides a generous lifting area and a secure grip.
  • Includes a plastic blow mold carrying case for easy storage.
Check Stock

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

  • ...rom stripping, making it important to install the harmonic balancer with precision and accuracy.
  • FITS YOUR VEHICLE: Designed for use on many late Ford, GM, Dodge, and Chrysler vehicles with V8 and V6 engines.
  • Long reach thread sizes include M14x1.5, M12x1.75, M12x1.5, M16x2.0.
  • EASY TO USE: Attach the pressure bearing screw nut onto the chosen jack screw.
  • After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer.
  • Continue tightening system into place with hand wrench (not included) and remove installer assembly.
  • CONTENTS: Long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes.
  • Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to corrosion.
  • CONVENIENT STORAGE: Heavy-duty plastic blow-molded case provides convenient organization and easy transportation.
  • The 10 x 5.2 x 2.8 inch (25.4 x 13.2 x 7.1 cm) carrying case features lock latches for safe storage.
Check Stock

Skelang 2 Pcs Racing Jack Caster Wheel with 12mm Stem for 3 Ton Floor Jack

  • This jack caster is made of steel, durable and solid in construction.
  • The jack caster measures 2-3/8" in wheel diameter, 3-3/8" in mounting height.
  • stem size measures 12mm x 7/8" (Dia. x H).
  • Compatible with 3 ton rated floor jack with 12mm mounting holes (Please check the size before order).
  • Package includes jack casters, washers and nuts.
  • it's easy to screw the caster onto the floor jack.
  • It's great to replace old, worn or damaged casters on the floor jack, making the floor jack roll around with ease.
Check Stock