Reviews Acq Preservative

Conquest 0.275” x 8” T-30 Star Drive Structural Screws ICC Certified ESR-4613 Pack of 50

  • ICC Certified under Listing Report ESR-4613.
  • [DIMENSIONS] Thread Diameter: 0.275" | Length: 8" | Quantity: 50 Pieces | Material: Carbon Steel.
  • [CORROSION RESISTANT] Silver Ruspert coated and approved for ACQ lumber.
  • [STAR DRIVE] T-30 Star Drive for positive engagement and no stripped screw heads..
  • [TYPE 17 POINT] Sharp pointed design with a cut out flute to help capture and remove waste allowing self-drilling.
Check Stock

CAMO Edge Deck Screws 1-7/8' ProTech (1750 ct)

  • SELF-DRILLING POINT: Together, coarse screw threads and a self-drilling point design eliminate the need for a pilot hole.
  • FLAT-HEAD STYLE: Sits flush with material.
  • TAN CERAMIC COATING: 4-layer coating provides superior rust and corrosion protection.
  • STAR DRIVE STYLE: Also known as Torx, this drive is designed to reduce slippage and camout when tightening the screw.
  • FREE T25 STAR BIT: Free driver bit included in package to match screws and take the guesswork out of installation.
  • SAFE FOR TREATED LUMBER: Recommended for use with ACQ, CA, and CCA treated lumber.
Check Stock

Germall Plus- Natural Preservative - Clear Liquid - Excellent Broad Spectrum Preservative Compatible with Most Cosmetic Ingredients Good for Water Based Formulas (1 Ounce / 30 mL)

  • Liquid Germall Plus is a good choice preservative for lotion making, shampoos, conditioners, creams, body washes, body sprays and other such formulas..
  • Germall Plus is a highly effective, broad spectrum preservative for emulsions and aqueous formulations..
  • Liquid Germall plus preservative for lotion making, natural preservatives for DIY products..
  • Germall PLUS can be used without additional co-preservatives and is compatible with essentially all cosmetic ingredients, including surfactants..
Check Stock

OZCO 56637 Laredo Sunset 8-inch Post to Beam Bolt Inline Connector, (2 per Pack)

  • (4) 2-3/4-inch OWT Timber Screws for bottom hole placement only.
  • Four OWT Timber Bolts are required and sold separately.
  • Approved for use with ACQ treated lumber.
  • Rest the heavy beam on the ledge while you secure the bolts.
  • Material constructed of 3/16-inch galvanized steel with a beautiful black powder coated finish.
  • Recommended for roofs, larger pavilions, pergolas and rafters.
Check Stock

Paslode Framing Nails 650385 HDG 30 Degree Round Head 3 inch x .120 Gauge 2,000 per Box

  • Efficiency - 10% more nails per collated strip means less reloading.
  • Durability - Offers high corrosion resistance in LVL, including ACQ and MCQ.
  • Low Maintenance - Polymer coating on round nailhead reduces staining and streaking by 80% compared to traditional Hot Dipped Galvanized framing nails.
  • Increased Productivity - Paper tape collation means no job site debris to clean up.
  • Expert Approval - IRC R319.3 code approved for use in pressure-treated lumber in accordance with ASTM A 154.
Check Stock

Tapcon 3/16\ x 1-1/4\ Star Torx Head Concrete Anchor Screws 3169407V2 | 100 Pack | Drill Bit Included

  • Tapcon anchors are masonry screws designed with Advanced Threadform Technology which cuts threads into all masonry materials including concrete, block and brick.
  • Many applications that include shelving brackets used in electrical equipment, HVAC strapping, 2x4 lumber, wood headers, window frames, jambs & sills, door frames to masonry, plywood backer boards to masonry & exterior installation into masonry.
Check Stock

Deck Plus 48401 Wood Screws #10 x 2-1/2', Green, 1lb Box

  • SELF-DRILLING POINT: Together, coarse screw threads and a self-drilling point design eliminate the need for a pilot hole.
  • FLAT-HEAD STYLE: Sits flush with material.
  • GREEN CERAMIC COATING: 4-layer coating provides superior rust and corrosion protection.
  • STAR DRIVE STYLE: Also known as Torx, this drive is designed to reduce slippage and camout when tightening the screw.
  • FREE T25 STAR BIT: Free driver bit included in package to match screws and take the guesswork out of installation.
  • SAFE FOR TREATED LUMBER: Recommended for use with ACQ, CA, and CCA treated lumber.
Check Stock

Tapcon 1/4 x 1-1/4 Star Torx Head Concrete Anchor Screws 3183407V2 | 100 Pack | Drill Bit Included

  • Tapcon anchors are masonry screws designed with Advanced Threadform Technology which cuts threads into all masonry materials including concrete, block and brick.
  • Many applications that include shelving brackets used in electrical equipment, HVAC strapping, 2x4 lumber, wood headers, window frames, jambs & sills, door frames to masonry, plywood backer boards to masonry & exterior installation into masonry.
Check Stock

Tapcon 3/16 x 2-3/4 Star Torx Head Concrete Anchor Screws 3175407V2 | 100 Pack | Drill Bit Included

  • Tapcon anchors are masonry screws designed with Advanced Threadform Technology which cuts threads into all masonry materials including concrete, block and brick.
  • Many applications that include shelving brackets used in electrical equipment, HVAC strapping, 2x4 lumber, wood headers, window frames, jambs & sills, door frames to masonry, plywood backer boards to masonry & exterior installation into masonry.
Check Stock