Reviews Acid Alkali Resistance Steam Hose

Laboratory Support Ring, Stainless Steel Lab Closed Ring Retort Support Inner Diameter 60/80/100/120/140/160mm (80mm)

HIGH QUALITY 304 STAINLESS STEEL: This laboratory support ring is made of high quality 304 stainless steel for durability..
HIGH RESISTANCE TO ACID/ALKALI/OXIDATION: The advantage of this laboratory closed stainless steel support ring is acid and alkali resistance and oxidation resistance..
6 DIFFERENT SIZES: We have 6 different sizes of ring retort supports for your choice, so you can meet your different needs..
GOOD LABORATORY ASSISTANTS: These laboratory support rings are very good laboratory assistants and are very practical..
APPLICATION: This laboratory support ring is suitable for biological and chemical laboratory test bed to support a variety of beakers, flasks, etc..

【Material】 Plastic barb connector, made of high-quality PVED material.
【Size】 1/8" OD One Way Check Valve，Can fit 1/8" hose ID.
【Function】The check valves are applicable for fluid systems to prevent countercurrent liquids, or for pneumatic systems to prevent reverse flow of compressed air..
【Performance】Hose barb check valve’s Opening pressure: 0.5 Kpa, Maximum back pressure: 300Kpa. Normal performance under 25 ℃ to 60 ℃,Strong resistance to acid, alkali, salt corrosion ability.
【Design】The check valve is designed with a non-slip card slot inside, which has strong adsorption performance, prevents falling off, non-toxic, and has air tightness..

... of the water level line, and the switch can automatically start/stop. Once the water level reaches the specified value, the pump will automatically stop to avoid idling..
【SAFE AND DURABLE】：Electric water pump is made of high-quality thermoplastic composite material, which has the characteristics of corrosion resistance, acid and alkali resistance, and waterproof, sure its the service of products from details . Built-in overheat protection ensures that the pump will not be burned out..
【LIGHTWEIGHT AND PORTABLE】：The water pump is easy to assemble, and the hose can be discharged by clamps or hose threads.
the weight is only 3.7kg, easy to carry, resists corrosion, suitable for use in the courtyard, pond, garden, swimming pool..

★ 【Attract attention】: Please be careful while checking your Valve to make sure SIZES fit，The interface is coarse thread, the thread pitch is 6mm.
★ 【Lead free】: Lead free Copper & Polyethylene (PE), Anti-corrosion, acid and alkali resistance, Can be used for storage of beer, etc..
★ 【Superior quality】The included silicone gasket and sealing tape can effectively prevent leakage.
★ 【Compatible】The size of the ball valve interface is 1/2″, which can be directly connected to garden pipe fittings, NO need for an additional brass adapter to adapt to Your Garden Hose.
★ 【Include】: 1/2″ ×3/4″ GHT Valve Faucet Garden Hose Connector+IBC Tote Tank Adapter 2″ +Silicone anti-leak gasket & Leak-proof tape.

【Material】The shell material is PVDF, and the Diaphragm material is silicon rubber.
【Diameter】 1/2"barb, can fit 1/2" hose ID.
【Performance】Normal performance under 25 ℃ to 60 ℃,Strong resistance to acid, alkali, salt corrosion ability.
【Application】Check valve is used in fluid system to prevent reverse flow fluid, or used in pneumatic system to prevent reverse flow of compressed air.

APPLICATION.The adapter’s barbed fitting creates a tight seal on flexible PE pipe when used with a hose clamp (sold separately)..
ADVANTAGE.An O-ring is delivered to the end of each joint thread, eliminating the need for a sealant or raw tape.
HIGH QUALITY MATERIAL. made of PVC ,have Alkali resistance, high temperature resistance, corrosion resistance, strong anti-aging, high strength, no break..
-30 degree to 100 degree F temperature range..
BARB HOSE FITTING.has a male National Pipe Thread (G) thread on one end and a barbed insert on the other.
Size: 16mm or 5/8″ Barb x 3/4″ G Male.

Made of high density squeezing graphite rod.
Good lubricity, high temperature resistance, oxidation resistance.
Acid and alkali resistance, strong thermal shock resistance.
Good electrical conductivity, high mechanical strength.
Used for metallurgy, machinery, electronics, chemical industry, light industry,etc.

✔ 1-1/2″ P-trap is one of the double sink drain pipe fittings, used to connect the kitchen sink drain and the garbage disposal. Also suitable for the sink of bathrooms, toilets, bathtub and salons..
✔ The drain pipe is made of flexible material and corrugated stretch design, adjustable between 7.8 and 25.6 inches. It can be bent and stretched at will in a narrow sink tank..
✔ Made of professional engineering polypropylene material, which has corrosion resistance, 212°F high temperature resistance, acid and alkali resistance, and not easy to crack..
✔ The inner diameter of the nut at both ends of the P-trap is 1.78 “/ 45.2mm, which is convenient to connect with the drain connector. The diameter of the corrugated hose is 1-1/2inch. (Please make sure the diameter of your drain connector is 1.78” before purchasing.).
✔ When installing, put on silicone sealing rings to prevent water leakage. You can fixed the pipe with our S-shaped buckle to maintain the shape..

Without a stainless steel infuser~High quality food grade enamel tea kettle, premium LEAD-FREE and NON-TOXIC, healthy and safe, no rust, durable..
High concentration of acid and alkali resistant glaze, stable chemical, no pollution, acid and alkali corrosion resistance..
A perfectly serviceable teapot. Sturdy, pleasing shade, nice weight, larger size of 2.5 / 3.5 / 5 Quart. The handle works for nearly all hand sizes. A lip on the end of the pouring spout that helps prevent drips..
Can be used on many types of stovetops, including electric, ceramic, halogen, induction cooker,but don’t boil water on gas stove top!.
High quality service：If you have any problem, please contact us. Our customer service is online 24 hours a day.