Reviews Ac Three Phase Magnet Power

Y&H 1200W Solar Grid Tie Micro Inverter with AC Data Monitoring Display Screen Waterproof IP65 MPPT DC28-50V PV Input AC80-160V Output for 36V Solar Panel

...VC series inverter Using IP65 waterproof streamline design which effectively prevent rainwater on the surface erosion. Microinverters turn the power from your solar panels into usable electricity. Single-phase microinverters are usually used in residential and small commercial environments（Support single-phase or three-phase connection）.
We have improved the AC wiring solution. Configure converters for faster installation. Avoid the risk of miswiring the fire, zero and ground wires.Meanwhile, the DC input is designed with MC4 connector to avoid reversing the positive and negative terminals. (Some customers extend the solar panel cable so that the positive and negative polarity is reversed).
Grid Tie Inverter can monitor in real time the power generated by the inverter through the AC digital meter.（Voltage, current, active power, electrical energy, frequency, power factor）No fire risk and electric shock during installation and operation due to low DC voltage(up to 50V) compared with at least 200V from string inverters.
Grid Tie Solar Inverter suitable for 4X250W-300W 36V solar panel (Vmp30-39V.
Voc = open circuit voltage.Optimized for high powered 60-cell and 72-cell* modules.Each MC4 branch cannot exceed 300W.

The base of the protector adopts a rail type with two screw holes, which can be directly installed separately or mounted on the HT35 rail..
Use 5 indicators to indicate: normal, phase loss (voltage three-phase unbalance), reverse phase, overvoltage and undervoltage..
Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S..
Overvoltage protection means that the voltage of the protected line is higher than the set value, and the delay is 3~8S, and the recovery is 6~20VAC..
Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action..

Features: Undervoltage protector integrates three-phase voltage protector, chronograph and counter in one.
Multifunction: The protection relay has protection functions such as overvoltage, undervoltage, phase loss, phase sequence, three-phase voltage unbalance, etc.
Practical functions: The voltage monitoring relay has functions such as start-up delay and output test. 2 rest module optional, manual and automatic.
Specification: Monitoring Circuit: L1, L2, L3.
LCD Display: LCD data display, easy to read, no external power supply required.

5000 watt two way Step Up Down voltage transformer with built-in voltage Regulator/stabilizer. Converts 110/120 volt to 220/240 V and Single Phase 220....
It can regulate big range fluctuating input voltage from AC 75V-130V or 180V-260V to output voltage: AC 110v+-3% or Single Phase AC 220v+-3%.....
Two Universal 220V outlet accepts plugs from any country except the big South African Plug. Three 110V outlet accepts 3 or 2 prong US plugs and 2....
Circuit breaker and metal casing with carry handle. Remember to leave at least 100% margin for power surges/Spike when buying a transformer. For....

3 INDICATORS-The protector base adopts 35mm rail type or device type, and has two screw hole structures inside, which can be directly installed separately or HT35 rail. Indicated by three indicators: normal, phase loss(voltage three-phase unbalance), reverse phase.
PHASE LOSS PROTECTION-Phase loss protection means that when the protected line is in the running state or non-operating state, any phase failure occurs, and the delay is 2S.
REVERSE PHASE PROTECTION-Reverse phase protection, a protection measure to prevent L1, L2, L3 three-phase AC phase sequence from being connected incorrectly, delay 2S action.
VOLTAGE IMBALANCE PROTECTION-Voltage imbalance protection, which refers to a protective measure that will affect the safe operation of the line due to three-phase voltage imbalance.
IDEAL FOR-Widely used in air compressors, electric motors, distribution boxes, water pumps, oil pumps, central air conditioning units, etc.

LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live.
Fully insulated alligator clips with wide jaws.
Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement.

...enerator (engine) + rotating body + wind tail.
2. Wind blade: 60cm in length, made of nylon carbon fiber. The longer the blades are, the more kinetic energy they generate and the more power they produce. Nylon material waterproof, corrosion resistant, lightweight, high efficiency..
3. Generator: three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged. The fan is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage.
4. Rotating body: with yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle, with low starting speed and low vibration..
5. Remarks: our products are designed through repeated experiments and tests, and the parameters are true，not false. Please contact us in time if you have any questions. Choose FBA to get wind turbine generator quickly..

1.Humanized design,the interface adopts binding posts,standard heat sink,integrated speed regulating potentiometer on the board,it can be used when the power is on,save time and effort..
2.Full patch technology,stable performance,with forward and reverse, brake function.Electric Motor Speed Controller Brushless Controller with Hall..
3.Wide voltage 6-60V high power 400W DC three-phase brushless with Hall controller..
4.High-power 400W DC three-phase brushless with Hall controller, support PLC 0-5V analog control, support PWM control, amplitude 2.5-5V.
5.There are three relatively thick phase wires on the motor, and there are also three phase wire interfaces on the driver board. They are marked with the characters of MA, MB, MC and other similar characters, and they are also connected respectively..