Reviews Ac Drain Line Fittings

Lisle 37140 Disconnect Pliers, 45 Degree

  • The Low Profile Design with 45° Bend Disconnects Fuel Line, EVAP Line Fittings and DEF Fittings in Hard-to-Reach Areas.
  • Low-profile design with 45° bend allows the tool to fit between the top of the fuel tank and vehicle.
Check Stock

IQIHUI 7PCS AC Fuel Line Disconnect Tool,AC Line Disconnect Kit,Transmission Oil Cooler Line Quick Disconnect Kit for Ford GM Mazda More Vehicles,Size1/4 5/16 3/8 1/2 5/8 3/4 7/8 Inch

  • 【Material】Fuel line quick disconnect heater hose disconnection tools are made of hard plastic to ensure strength and sturdiness..
  • 【Founction】Oil cooler pipeline quick disconnect kit, used to disassemble/disconnect fuel pipeline, heater pipeline, AC cooling pipeline and other quick disconnect fittings..
  • 【Application】The AC fuel line disconnect tool is compatible for most Ford, GM, Chrysler and Mazda models. It is also suitable for some other vehicles, and the automatic transmission line is within the size range..
  • 【Easy to use】The compact size is easy to grasp, and the inclined design allows access to hard-to-reach areas. Place the notch against the fuel line to release the lock and remove it..
  • 【Package】Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

  • Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
  • Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
  • Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
  • Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock

F-AL-3/8, 3/8″ Threaded Female Tank Filter for Mosquito Misting Systems

  • {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
  • {Pump Specifications} 110 Volt Kit Includes: – 200PSI Booster Pump with Plug (110v) – 50ft Flexible Tubing – Calcium Inhibitor Filter – 12 Brass/Stainless Steel Mist Orifice Nozzles – 0.012” – 11 – Push Lock Mist Tees – 1 – Push Lock End Mist Elbow – 6ft Feed line with 3/4 Garden hose connector – Plastic Clamps.
  • {Installation} – Push Lock Fittings – Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/or 3/8” Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4” Garden Hose Connecter Outlet Fitting: 1/4” and/o....
Check Stock

FEL-PRO ES 70599 Fuel Injector O-ring Set

  • Durable Material: Made of heavy plastic, durable, resistant to fuel and solvents, light weight, small size, easy to grip, spring-loaded design, long life..
  • Function: The Oil Cooler Line Quick Disconnect Kit provides 7 different sized tools for removing/disconnecting the fuel line, heater line, AC cooling line and other accessories on the quick disconnect fittings..
  • SIMPLE HANDLING: Compact size for easy grip and access to hard-to-reach lines. Hold the notch of the tool against the wire and open the clamp with a push. Then you can plug the line into the tool and disconnect it. (Please check the outer diameter of the fuel/oil/air conditioning piping before use.).
  • What You Get: Transmission Line Removal Tool Set Contains 7 Opening Sizes: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"..
  • Wide applicability: 7 sizes of disconnect tools for a variety of fuel lines and other quick disconnects. If you have any questions about this product, please keep in touch with us in time..
Check Stock

Orbit Cobra Personal Misting System Stand for Cooling - Includes 2 Mist Nozzles

  • BEAT THE HEAT: The Orbit Misting System will decrease the temperature on your outdoor patio up to 20 degrees F. You will beat the heat this summer and cool off with this awesome misting system..
  • EASY ASSEMBLY: This patio misting system can be assembled and having you enjoying your backyard in just minutes. It will attach to virtually any standard garden hose. No special tools are required..
  • STORAGE AND MAINTENANCE: If you live in an area that will see freezing temperatures be sure to drain your Orbit Mist Cooling System before winter sets in. It is recommended that you clean your nozzles once a year..
  • KIT CONTENTS: This outdoor misting system comes with 10 feet of 3/8 inch Flexible Feed Line Tubing, (5) 2 feet lengths of 3/8 inch Flexible Mist Tubing, (5) Brass Misting Nozzles, (6) Brass Slip-Lok T Fittings, (10) Hanging Clamps, (1) Hose Washer, (1) Brass Automatic Drain Valve, (1) Brass Slip-Lok End Plug and (1) Brass Slip-lock Hose Faucet Adapter..
Check Stock

1/2" NPT Solid Brass Drain Plugs commonly Used in Boat Hulls, 2 Pack Solid Brass Boat Hull Spare Garboard Drain Plug for Bayliner Four Winns Glastron Larson Sea Ray Starcraft and Many Other Models

  • Cast Brass Pipe Plug, 1/2" NPT solid brass Drain Plugs. These are made to stopper drain holes on boat transoms. It fits a standard transom drain hole. Check the size of your transom hole..
  • Precision thread and solid brass, more durable, ductility at high temperatures, and low magnetic permeability, not hollow like many poor quality plugs that rot and sink boats..
  • This item for sale is a brand new 2-Pack of 1/2" NPT solid brass Drain Plugs commonly used in boat hulls. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • Used on Most boats such as: Bayliner, Four Winns, Glastron, Larson, Sea Ray, Starcraft And many other models. Unique design achieves very good waterproof sealing performance..
  • It can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

Residential Misting System- Made in USA Pump- 200 psi Mid Pressure Patio Misting System-12 Nozzles Misting System

  • {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
  • {Pump Specifications} 110 Volt Kit Includes: - 200PSI Booster Pump with Plug (110v) - 50ft Flexible Tubing – Calcium Inhibitor Filter - 12 Brass/Stainless Steel Mist Orifice Nozzles - 0.012'' - 11 - Push Lock Mist Tees - 1 - Push Lock End Mist Elbow - 6ft Feed line with 3/4 Garden hose connector - Plastic Clamps.
  • {Installation} - Push Lock Fittings - Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock. MC12020.
Check Stock

BLACKHORSE-RACING Turbo Charger Oil Drain Return Line Oil Feed Complete Kit T3 T4 T04E T60 T61 T70 Silver

  • Will work with T3 T3 T04E T61 T601 T70 turbo.
  • Comes with 17" braided oil drain return line (comes with AN10(-10AN) fittings for return line kit,oil line covered with high quality woven Stainless steel for racing and aggressive look.).
  • Circulate oil to the oil pan (only for metal plates).
  • It helps to circulate oil from the turbocharger to the oil sump. The kit provides an anodized appearance that provides optimum cooling performance on a turbocharger for long life.And special designed inlet adapter limits oil flow ,effectively prevent blown oil seal caused by excessive oil pressure.
  • Comes with gasket,screws/washer,all fitting are made of high quality aluminum.No Instruction Included, Professional Installation is Recommended!.
Check Stock