Reviews Ac Current Contactor

Electrodepot 30 Amp 3 Pole Contactor, 110-120V Coil, Motor Load 32A, Lighting 40A, 50A Bundle with Slotted Steel Zinc Plated DIN Rail, 35 Millimeters x 6 Inches – 1 Piece with 2 Number 10 Screws

BUNDLE CONTENT: The bundle includes one (1) 30A Contactor and one (1) compatible Slotted Steel Zinc Plated DIN Rail with two (2) drive stainless steel truss head screws (#10, 1/2") for immediate installation.
LOAD: Inductive/Motor Load, 32Amp. Incandescent/General purpose Load, 50Amp. Lightning, 40Amp, 50Amp.
COIL RATED VOLTAGE: AC 110V/120V, 50/60Hz.
AUXILIARY CONTACTS: 1 NC (Normally Closed) and 1 NO (Normally Open) incorporated contacts.
CONTACTOR DIMENSIONS (approx.): 85 x 45 x 92 mm / 3.4'' x 1.7'' x 3.6'' (Length x Width x Height).

1.Made of solid and weather resistant steel and powder coated black surface for great durability.This winch solenoid contactor replacement come with shatterproof sealed and corrosion resistant case..
2.It is designed to handle intermittent current loads of 250 amps for up to 10 seconds, requiring a 20-30 second cooling time between cycles,Wireless remote control kit 12V for winches up to 2000-5000lb.Easy to install and use, portable..
3.Built-in antenna design,Remote range up to about 164ft(50m).Visual indicator light shows remote operation.Allows operator to keep clear of dangerous rigging.Operator can monitor winching or lifting from different positions..
4.Weather-resistant receiver WATERPROOF design,Waterproof casing will protect the receiver from rain or coffee spill,Submerged in water operation is NOT recommended..
5.12V 250A Winch Solenoid Relay Contactor for all 12Vsolenoid winches,including ATV's,UTV's,SUV's,Jeep's,4x4 vehicles, and 12V Trailer ect..

Replacement 12V Solenoid Relay Contactor & Winch Rocker Thumb Switch Combo for ATV UTV..
Fitment: for ATV Winch Solenoid Relay Contactor Switch..
Package Includes: 1 x 12V Winch Solenoid Relay Contactor, 1 x Winch Contactor Rocker Thumb Switch, 1 Set of Mounting Brackets, 6 x Insulated Protecting Waterproof Caps..
Fast ships from TX/CA warehouse,handing time within 24h in business days..

【Features】：5A range single-phase AC mutual inductance module The inductance module is equipped with ZMCT103C series high-precision current transformers and high-precision sampling resistors to facilitate the collection of AC current within 5A.
【Convenience】：Sampling resistance of AC current transformer onload sampling resistance to facilitate the signal collection of AC current..
【Analog current output】：the module can measure the AC current within 5A, and corredsponding output is 5A/5mA.
【Small size】：Current transformer of AC current mutual module with precise miniature current transformer.
【Original】：Our electronic components are 100% original manufacturing, please rest assured to buy our products.

☛Choose UL Listed☚ UL Listed Means Highest Safety and Quality Standard with Accurate Current Rating,We Receive Unannounced Visits from UL Representatives to Ensure Highest Standards are Being 100% Maintained..
☛Easy Identification☚ Current Rating (DC 40 Amp) Marked Clearly on Top of the Fuses and Standard Color Coded Orange,Pack of 10 pcs.
☛Fuse Type☚ ATC Fast Cutout,Contact Material Open to the Atmosphere,Transparent Housing and Fluke Detectable Contactor on Top Make it Easy to Check Fuse Link and Quick Detection of a Blown Fuse.
☛Product Details☚ Voltage:32V(24V 12V Acceptable to use a Higher Rated Fuse in a Lower Voltage Application), Current Rating: 40 A, Resistance: 1.2mΩ, I2t: 3310A2Sec, Quick Acting (cutoff) Time: See Picture, Size:19mmx18.5mmx5.2mm,Temperature:-40℃ - +125℃.
☛Compatible with☚ Most German/EU Cars,Electric Bicycle,Trucks,Motorcycle,RV,Camper,Headlamp Headlight,Vehicle,Lawn tractor,Automotive,Automobile,Boat,Blo Fuse Replacement,DOT Requirement..

40 FLA Amp Rating - 1 Pole - 24 Volt Coil. Replaces Most 2 Pole Contactors Rated at 20 Amps, 25 Amps, 30 Amps, 35 Amps, or 40 Amps on Air Conditioners....
Can be used for virtually all single pole ac contactor replacements Carrier-Bryant-Payne-Goodman-Amana-Janitrol-Rheem Ruud Weatherking-Lennox,....
Base assembly is made from high performance Bulk (Dough) molding compounds.

【DC Current Output Signal】 - The SZT15-CH-420E AC current transducer provides real-time isolated measurement of AC current in the grid or circuit and converts it to a 0-5V / 0-10V or 4-20mA DC current output signal ..
【Withstand Voltage】 - Through-heart structure design, insulation withstand voltage up to 2000V AC. The measured current AC: 0-10A / 20A / 50A can be selected..
【Usage】 - Magnetic hysteresis less than 1%, can be used in strong magnetic field conditions. The current transducer is used for AC current monitoring, detection, current overload protection, and is also used as an electronic switch for automatic control systems..
【High Performance】 - The outer casing is made of self-extinguishing material, it has the characteristics of strong overload ability, high precision, high isolation, high security, low power consumption and strong anti-interference ability..
【Easy To Installation】 - There is no need to connect the dc series into the circuit during measurement, safe isolation of input and output. It is suitable for various applications requiring current and voltage conversion..

This is a Brand New Upgraded 1 Pole 30 Amp Condenser Contactor.
This contactor is rated for 30 amps, meaning it is an upgrade for old 25 amp contactors.
The coil is rated for 24 volts- It also has a sealed contact!.
This contactor will work with 99% of residential units!.