Reviews 6an Nylon Braided Hose

EVIL ENERGY 6AN Female to 3/8 Push on Hose Barb Fitting Adapter Straight Swivel Aluminum Alloy Black

Female 6AN to 3/8 inch push on hose barb connector is made of aluminum alloy 6061-T6 for the transition from pipe threaded connector to hose ,which is....
-6AN thread size is 9/16 UNF, used for 6AN male thread fitting.
The barb can use in 3/8" inner diameter fuel hose..
Simple installation - Female thread adapter: only need to tighten the thread.barb adapter: put the hose over the barb and use a hose clamp to tighten....
Note：Barbed style fittings are limited to relatively low pressures(usually below 4000 psi)due to the limitations of the soft and flexible....
EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..

Size: 6an female to 3/8" barb, and that of 6an thread size is 9/16-18UNF..
Material: made of aluminum alloy, reusable and recyclable..
Max pressure: 2000PSI, temperature range: -40℉ to 248℉..
Please attention that an6 push lock hose barb only compatible with rubber fuel line..
EVIL ENERGY provide 3 angles of 6an hose barb: straight, 45degree, 90degree..

Package Including: 16 Ft Silver Braided Fuel/Oil/Gas Line Kit:(10pcs 6AN hose fitting + 16Ft AN6 PTFE Oil line).
Universal Application: The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas....
Hose Material: Inner core PTFE has excellent corrosion resistance..
Working Temperature: -40 F to 248 F(-40¡æ to +120¡æ) under most operating. Working Pressure:500 PSI.
Features: Maximized Resistance to Heat, Corrosion and Abrasion.

8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black.
Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi. AN-8 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances..
Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance.
The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability..
PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant..
Package Includes: 1 x 8AN 20FT Nylon Braided Hose. It can't be bend and folding in half. Professional Installer is Highly Recommended. Exchange or return for free if leak..

【Material】Outside Hose Material: Coverd with High Quality Nylon and Stainless Steel Wires.
Inner Hose Material: CPE Synthetic Material Hose..
【CPE Braided Hose】Mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel..
【Application】This braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
【Performance】Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
【Note】Not recommended installation in corrosive environment, braided fuel line's service life will be influenced..

Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
The PTFE hose end is reusable, just replace a new ferrule if you reinstall the fitting..
EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..

Application: Universal fuel line hose, Such as fuel, lube, alcohol, ethanol, coolant, and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes..
Reliable Material: The fuel line hose based on high-quality stainless steel, aluminum alloy and nylon, it has excellent flexibility and wear resistance. The outer nylon braid has excellent flame resistance and is safe to use..
The fuel line hose Maximum Working Pressure of Braided Steel Fuel Hose (psi): 500 psi. Bursting pressure (psi): 2000psi. Operating temperature range: -40°F to 257°F (-40°C to 129°C). Before buying, make sure that the pressure and temperature range are suitable for your application..
Package Includes: 10pcs 8an rotating hose ends (4 straight, 2pcs 45 degrees, 2pcs 90 degrees, 2pcs180 degrees),2pcs 8an hose separator clamp,1pcs gloves,1/2 braided fuel pipes (length: 16 feet). Hose ID: 0.44 inch (11.13 mm). The outer diameter of the hose: 0.67 inches (17.02 mm)..
Perfect Replacement: Fuel line hose, reliable material can safely replace the original parts, covered with high-quality braided nylon, enhance flexibility and provide a cool racing appearance.

Package Included: 2 pcs x 6AN to 6AN Male Flare Coupling Union Adapter.
Thread size of 6AN male coupler is 9/18-18 JIC, can use to splice or extend a line, works with female thread fitting..
Black 6061-T6 aluminum 6AN flare union work temperature: -65 to +252 degree F, max pressure: 1000 psi, ultimate torque: 25N..
Male to male flares coupler usually used in fuel system,such as fuel hose extend, line connect to fuel filter, fuel pump, cooler system..
Mala union fittings can works with EVIL ENERGY Swivel fitting, push lock fitting and female AN fittings.Please match the correct size..

This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..