Reviews 6an Braided Fuel Lines

EVIL ENERGY 6AN 90 Degree Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • ...on, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed..
  • 6AN 90 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose ..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Vincos 20Ft 6 an 6an AN6 Nylon and Stainless Steel Braided Oil Gas Fuel Hose Fuel Line + 10pcs 6an Hose Fitting Kit

  • Package Including: 16 Ft Silver Braided Fuel/Oil/Gas Line Kit:(10pcs 6AN hose fitting + 16Ft AN6 PTFE Oil line).
  • Universal Application: The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas....
  • Hose Material: Inner core PTFE has excellent corrosion resistance..
  • Working Temperature: -40 F to 248 F(-40¡æ to +120¡æ) under most operating. Working Pressure:500 PSI.
  • Features: Maximized Resistance to Heat, Corrosion and Abrasion.
Check Stock

EVIL ENERGY 6AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black 2PCS

  • The female AN6 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. Package: 2 PCS..
  • 6AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our swivel fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose, E85, rubber hose..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

3/8 Transmission Cooler Hose - 6AN High Pressure Fuel Line Braided Hose For Marine, Car, Engine System, Alcohol, Nitro, Fuel Transmission, Clutch, Power Steering, Oil and Hydraulic (10 FT)

  • PREMIUM MATERIAL◀The 3/8 transmission cooler hose is made with high-quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber, thus preventing it from rusting and corrosion. It has a wall thickness of 35mm..
  • BETTER TRANSIMMISION◀A perfect fuel line for vehicles with engines that need a large tube diameter. Its 3/8 inch diameter helps in better flow and intake of fuel. This 3/8 braided hose ensures that the car engine is able to process the fuel in the best possible state. The 3/8 fuel line comes as a roll of 10 feet long enough for a wide range of applications..
  • QUALITY TESTED ◀The tube is double annealed and 304 grade making it easy for bending and flaring. You can cut the tubing according to actual needs to better meet your needs.Oil resistant, cold-resistant, and ethanol tolerance..
  • BENDABLE ◀The 3/8 transmission hose enable you to make sharp bends without kinking. It is easy to work with, and you can even bend it with the palm of your hand. You, however, need to bend it slowly and back and forth for perfect curves..
  • WIDE APPLICATION ◀ The 6an fuel line i....
Check Stock

SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs

  • ... hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
  • 【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
  • 【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized finish for corrosion protection. Features: anti-rust, waterproof, oil-proof..
  • Six-month warranty provides by SINTLY. If you have any questions, please contact us. ( NO INSTALLATION INSTRUCTIONS, Adjustable wrench is highly recommended.).
Check Stock

EVIL ENERGY 6AN Straight Push Lock Hose Fitting End Black

  • Size: 6an female to 3/8" barb, and that of 6an thread size is 9/16-18UNF..
  • Material: made of aluminum alloy, reusable and recyclable..
  • Max pressure: 2000PSI, temperature range: -40℉ to 248℉..
  • Please attention that an6 push lock hose barb only compatible with rubber fuel line..
  • EVIL ENERGY provide 3 angles of 6an hose barb: straight, 45degree, 90degree..
Check Stock

EVIL ENERGY 6AN PTFE Hose End Fitting 90 Degree Black for PTFE Hose Only

  • Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
  • Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
  • The PTFE hose end is reusable, just  replace a new ferrule if you reinstall the fitting..
  • EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
  • Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

EVIL ENERGY Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion

  • Function: Fuel pressure regulator filter used to create a returnless fuel supply for LS engine swaps and electronic fuel injection conversions. This bypass regulator passes excess fuel back into the tank so the pump can run freely..
  • Feature: The fuel filter regulator with 6AN adpater fittings for LS Swap delivers 58 PSI (4 BAR) to your fuel rail and returns unused gas to the tank, and build-in a 10 micron fuel filter ensures clean fuel is delivered to your engine, thus to protect the normal operation of the engine, reduce wear, avoid blocking, improve the purpose of engine life..
  • Compatible with: The fuel filter pressure regulator compatible with Chevrolet 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines). Please you check the part is your need before purchase..
  • Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartm....
Check Stock

EVIL ENERGY 6AN Flare to 6AN ORB Male Fuel Rail Adapter Fitting Black 2Pcs

  • size:the thread size of 6AN is 9/16-18 UNF,the thread size of 6AN ORB is 9/16-18 UNF.
  • Sealing：The AN side of the flare is sealed by a 37 degree angle and The ORB side is sealed with an O-ring..
  • Material: The 6AN to 6AN orb reducer is made of aluminum alloy 6061-T6 which is anodized black surface,and the O-ring is made of NBR rubber.(Temperature Range: -40F° to +212F°.Maximum working pressure: 4000PSI).
  • The orb fitting can be used with water, air, fuel, oil, fuild, E85, etc..
  • EVIL ENERGY provide the orb adapter 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock