Reviews 5v Relay Current Ratings

CGELE PID Temperature Controller Kit Voltage AC 100V to 240V Comes with SSR 40DA Solid State Relay, K Type Thermocouple Sensor, and Black Heat Sink

♥【What You Get】In this PID temperature controller kit,it include 1 x PID temperature controller,1 x solid state relay 40DA，1 x K type thermocouple，1 x heat sink..
♥【Product parameters】Power supply voltage:110-240VAC 50/60Hz.
working environment:ambient temperature: 0℃~50℃,relative humidity: 35%~85% (no condensation) ；storage temperature：-25℃~65℃（avoid ice or dew）；resolution：1℃，0.1℃（adjustable）；wiring method：terminals；accuracy：+0.5%FS.
installation environment:installation type ll, pollution grade 2 (IEC61010-1).
max current: 30mA, load resistance:≥1K..
♥【Feature】 Support 2 wire thermocouple input,1 way solid state relay output,1 way relay alarm output.
digital display of real-time and set temperatures,adjustable degrees ℉ and ℃..
♥【Size】The panel size of PID temperature controller is 48(W)mmx48mm(L),install hole size is 46(W)mmx46mm(L).Total size:48mm(W)x48mm(L)x76mm(H).
♥【Widely application】Widely used in chemical industry, medical industry, product industry, machinery industry, greenhouse farming, agricultural planting, etc..

DIN Rail mount 8 Channel 10Amp SPDT Power Relay Module, DC 5V Version..
JS1-5V-F Power Relays. LED indicator for each relay channel. Darlington transistors circuit driving relay, improve the reliability of action..
DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass dual layers PCB..
High quality terminal block: Pitch 5.0mm/0.197.

Solid state relay module, long service life and high reliability, low drive voltage and current, widely used in many automatic control systems..
Model: XRE-1D4840 Solid State Relay 40A DC to AC..
Input voltage: 3-32V DC Output voltage: 24-480V AC.
Note: The current of this product is 40A for a long time. A large heat sink or fan need to be added..
Package Content: 2 x 40A Solid State Relay, ideal for automatic process control application, a must component for temperature controller and other machinery control system..

Output: fan relay, alarm relay and 4-20ma current loop.
Controls: buzzer, Digital display, latching relay, relay Delay, relay minimum runtime.
Mounts on a standard 4” x 4” electrical box.
5 a spdt fan relay controls starters of exhaust fans.

This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..

INPUT CONTROL SIGNAL: Voltage AC or DC 24V, Current 17mA..
OUTPUT CURRENT: Output switch DPST 1NO 1NC(Double Pole Single Throw, 1 Normally Open and 1 Normally Close ), rated current 8A/250VAC or 8A/30VDC (one switch)..
SIMPLE & PRACTICAL: This passive power relay module is simple and practical, which is very convenient to use. It can support both Normally Open and Normally Close..
EASY MOUNT: The power relay is of compact plastic case and wires connects for easy mount. Two screw mounting holes are convenient for you to fix it on the wall or wooden board. Of course, you can also choose not to lock the screw..
LED INDICATION: This power relay has a led indicator for relay action indication. It is obvious to know the status of the switch at a glance..

The Hawkeye Relay Combination Series is the ideal solution for the automation installer..
These units combine a current switch and relay into a single package, reducing the space required for total control of fans and pumps..
The current switch and relay operate independently of one another..
These devices allow start/stop control and status monitoring with one device instead of two..

12V 16-Channel Relay interface board, and each one needs 15-20mA Driver Current.
Equipped with high-current relay, AC250V 10A.
Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP433, TTL logic).
Indication LED's for Relay output status.

Control Method: The solid state relay uses DC-DC control method, which can provide stable performance..
Load Current: 100A, Load Voltage: 5-220VDC, Control Voltage: 3-32VDC, Control Current: DC: 5-50mA.
Installation: The solid state relay uses bolted installation method, easy to install and remove..
Heat Dissipation: The relay has pure aluminum heat sink base plate for fast heat dissipation..
Material: The solid state relay is made of thyristor and optoelectronic with non-contact switch..