Reviews 500l Pressure Tank

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...e equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • ✅【PERFECT COMPATIBILITY】 : The scuba tank's inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices.
  • ✅【HIGH QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag..
  • ✅【PROFESSIONAL SCUBA TANK WITH DOT CERTIFIED 】:Our min....
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ..., with the equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • PERFECT COMPATIBILITY : The scuba tank's inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices..
  • HIGH QUALITY MINI SCUBA TANK: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag..
  • PROFESSIONAL SCUBA TANK WITH DOT CERTIFIED :Our mini scuba tank have....
Check Stock

Viair 20001 PSI Ultra Duty Onboard Air System

  • Intended for inflation of tires up to 37 inches or to actuate air horns that require 200PSI.
  • Includes the essential components to install an onboard air system: 480C Air compressor, pressure switch, 2.5 gallon air tank, relay, air tank....
  • 200 PSI maximum working pressure, 1.76 CFM at 0 PSI.
  • Can inflate a 37 Inch Tire from 0-30PSI in 7 minutes and 10 seconds..
  • One Year Manufacturer's defect warranty through manufacturer with receipt. Air tank should be used with a drain cock and pressure release valve..
Check Stock

Pressurized Water Tank 8 Gallon, SAN HIMA Camping Shower Water Storage for Off-Road Vehicles, Pick-up Trucks,Outdoor Activities Water Supply

  • ...rized camping shower water tank comes with a nozzle which is engineered with four patterns and can meet all your needs. And the nozzle features a locking clip to provide you with hands free running water when you need both hands to clean your camping dishes with this pressurized water storage. Whether you need high-pressure jet or soft hand wash, the nozzle has you covered.
  • Hassle Free Pressurization: Your pressurized roadshower water tankwill automatically pressurize as it fills through a garden hose. The pressurized water storage can also be manually pressurized through the Schrader air valve. And the pressurized water tank comes with a built-in pressure relief valve which automatically relieves excess pressure to prevent excess pressure buildup that has the potential to cause a tank burst.
  • High Durability: This pressurized water tank is built of lightweight aluminum with powder coat finish, which can heat up the water in the sun. And the pressurized water storage is equipped with brass fittings and stainless steel mounting hardware for years of use. Two slots on the bottom of the pressurized water storage allows for more dependable attachment to your vehicle than....
Check Stock

HPDMC 2000PSI Paintball Air Tank Regulator & Valve Guage Adjustable Compressed Air Tank Cylinder

  • 【PARAMETER】Adjustable pressure: 0~2000psi / Input pressure: 3000psi / Output thread: G1/2-14 / Input thread: 0.825-14NGO.
  • 【ADJUSTABLE PRESSURE】 The air regulators change the fluctuating output pressure from your tank into a steady supply that provides a consistent and accurate function..
  • 【STABLE MATERIAL】The air tank regulator is made of high quality aluminum material, which is sturdy and durable, an economical high performance tank regulator..
  • 【WIDE APPLICATION】With a high air flow rate to make paintball shoot out with faster speed. The paintball accessory can fit most of your tanks with threads 5/8..
  • 【EASY TO USE】The regulator is lightweight and easily to rebuild. Practical and convenient to use..
Check Stock

Aquatec 6800 Booster Pump Kit for up to 100 GPD home RO reverse osmosis water filter system Standard or Manifold, includes pump, pressure switch PSW-240, transformer, 6840-2J03-B224 B221 Made In USA

  • This pump kit includes Aquatec pump 6840-2J03-B224 with heavy duty steel base plate with damper, PSW-240 pressure switch, transformer 110V USA plug, 1/4″ inlet/outlet for pump and pressure switch, detail instruction.
  • This pump is designed to increase the water supply pressure to a RO water system. Increase input pressure from 30-40 psi to 60-80 psi depending on the capacity of your RO system. This pump is good for under 100 GPD (gallons per day) RO systems Most home drinking RO systems are under 100 GPD.
  • Automatic ON/OFF operation. The pressure switch would sense the pressure in the output line, so when the output line is shut off or the storage tank is full or reaches 40-50 psi, the pump would shut off, and then when you start using water and tank pressure drops, then the pump turns back ON to replenish the tank..
  • This kit DOES NOT come with the optional (ESO) Electric-Shut-Off solenoid valve, so it would reply on your existing mechanical auto-shut-off valve in your RO system to turn off the water supply when the tank is full. For most systems this kit will work fine..
  • This kit is NOT for misting, ice maker line, line boosting, water transfer. This pump kit is designed for increasing water supply pressure to a RO water system.
Check Stock

American Standard CE-12-AS 12 gallon Point of Use Electric Water Heater

  • Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion.
  • Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life.
  • Factory installed Brass temperature/pressure relief valve.
  • American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory.
Check Stock

American Standard CE-20-AS 19 Gallon Point Of Use Electric Water Heater

  • Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion.
  • Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life.
  • Factory installed Brass temperature/pressure relief valve.
  • American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory.
Check Stock

American Standard CE-6-AS 6 gallon Point of Use Electric Water Heater

  • Inner Dura glas lined tank fired at 1,600°f for optimum protection from the effects of corrosion.
  • Factory installed Brass drain valve on all models allows for easy draining of the unit which reduces sediment deposits extending tank life.
  • Factory installed Brass temperature/pressure relief valve.
  • American standard point-of-use electric water heaters are all certified at 300 psi test pressure and 150 psi working pressure. All tanks are also 100% hydrostatically tested at the factory.
Check Stock