Reviews 5 16 18 Screws

5/16-18 x 1\ Flat Countersunk Head Socket Cap Screws, Full Thread, Machine Thread, Allen Hex Drive, 304 Stainless Steel 18-8 SS, 20 PCS

Package: 20 PCS 5/16-18 x 1" Flat Head Socket Cap Screws (Specification described in the pictures).
Screw Length: 1 inch or 25.4mm (including the height of the flat head).
Please pay attention the thread length is the total screw length minus the head height..
Outside Diameter of the Head: approximately 0.6-0.656 inch.
Ideal for use in confined areas where the head needs to be flush or below the surface..
Made of 304 stainless steel (no coating outside), provides good strength and corrosion resistance in bad environments..

【♖♖】Product name: M2.5 Hex Socket Screws and M2 Nylock Nuts Kit.
【♖♖】Material: 12.9 Grade Carbon Steel.
【♖♖】Package: 60pcs M2.5 Nylon Self Locking Nuts, 100pcs M2.5 Hex Socket Cap Screws, one wrench.
【♖♖】Sizes: M2.5 x 10mm , M2.5 x 12mm, M2.5 x 16mm, M2.5 x 18mm, M2.5 x 20mm..

10 pack/pieces knurled head solid brass thumb screws with straight shoulders and flat tips.
The knurled surface on these thumb screws provides optimal gripping allowing the screw to be tightened and loosened by hand pressure alone eliminating the need for tools. Knurled head screws are common in applications requiring frequent fastening and unfastening..
Available in the following SAE thread sizes: 6-32, 8-32, 10-32, 1/4-20, 5/16-18 and 3/8-16.
Made from solid brass which is a corrosion-resistant alloy..

Allows Moroso and other air cleaners with 1/4" stud and wing nut to be used on carburetors with a 5/16" mounting hole.
One end of the adapter features a 5/16" -18 male thread that screws into the carburetor, the other end features a 1/4" -20 female thread that accepts....

Product includs:3-Rubber Paddle , 3-Metal Straps , 9-Bolts & Lock Nuts , 3-Self-tapping Screws.
The traditional zinc coated screw, after long time use, will inevitably rust with the nut and become welded together. This makes it impossible to repeat use after unscrewing. Our screws are made of 304 stainless steel, which means it can stand years of harsh environment while being rust-resistant. Because of this, you can expect to use it again and again..
Rubber Paddle 3/8″ thick(2″W x 5″L), Made from Styrene Butadiene rubber (SBR rubber) ,SBR rubber with minimum tensile strength of 725 PSI (5 MPA),Hard rubber with a durometer of 65-75.
Metal Strap with holes – 1 3/8″ W x 3 3/4″L ,Punched flat bar stainless steel materials, 1/16″ thick.
Bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2″ wrench & socket).
Hex Bolts,Hex lock nuts nylon inser,self-tapping screw (#14 x 1),Sheet metal screw, Hex washer head self drilling, Stainless Steel Materials.
The Purpose of the Kit : This kit reduces the existing “gap” between the snow blower’s impeller blades and the impeller chamber wall. The smaller the gap, the greater your machine’s operational efficiency and snow throwing capability will be, a....

Precise Design. Each faucet extractor is specially designed for fast grasping and easy removal of damaged screw taps..
Scenes to Be Used. The faucet extractor is suitable for industrial screw and bolt removal and daily household maintenance work..
Product Usage. Faucet extractors are used to remove peeled, rusted, damaged or corroded screws and bolts..
Strict Quality Inspection. Each faucet extractor has undergone strict quality testing and is durable..
3/4 FLUTE SPECIFICATION---1#: 3 flute, M4, 6#.

...e bag, 8" water pump plier, 6" slip-joint plier, 6" needle nose plier, 8" adjustable wrench, 6" mini hack saw & 5 saw blades, 8oz fiberglass claw hammer, 8" household scissor, 9" magnetic torpedo level, 10ft self-locking tape measure, 0.7" (18mm) utility knife & 10 blades, 50 cable zip ties, 5 spring clamps, 100pcs screws assortments.
18+1 Clutch & 2 Variable Speeds: Max torque is 221inlb/25Nm, 25% powerful than other 12V cordless brush motor drills. Flexible, adjust the torque level for different types of project (1-4: driving small screws, 5-9: driving screws into soft material, 10-13: driving screws into hard material, 14-16: driving screws into hard wood, 17-18: driving larger screws, +1: for heavy drilling), two speeds are easy to set for driving at low speeds (0 – 350 RPM) or high speeds ( 0 – 1,350 RPM).
2.0 Ah Li-ion Battery: Larger capacity compared with other 12V cordless drills’ 1.5Ah battery, offering more working time and reducing charging frequency. Battery can be fully charged within 1.5 hours and load working times is 70mins. Safe and reliable, continuously charged for 24 hours without high temperature or explosion situation.
3/8” Keyless Chuck & Forward/Reserve Control: Universal, fitting most 3/8” drills with 24 UNF thread mo....

FUNCTION: By allowing you to easily add mating threads to your wooden furniture components, these premium, dependable screws give you an efficient way to quickly and securely attach your threaded components to your furniture and cabinets..
GREAT ADVANTAGE: With these handy screw-on t nuts, you can secure the mating threads from the attachment surface (rather than through the back, as is the case with regular t-nuts) essential when installing glides and caster onto the ends of legs, and fastening bedposts to beds..
SECURE & EASY INSTALLATION: Screw-on design makes for easy, precise non-rotating installation. Simply pre-drill the hole of the nut, accommodating the screw’s 15/32” OD. Three side protrusions on the OD of the screw further enhance positive lock against loosening, even with heavy-duty use. Install utilizing the 3 pre-drilled holes on the nut’s flange..
APPLICATIONS: Allows for the easy attachment of wooden legs, feet, glides, casters, levelers, and other components to your furniture, cabinets, shelves, and more. This nut inserts flush to the mating surface to ensure a polished look to your finished pieces..
COMPATIBILITY: Works with 5/16”-18 threaded bolted components.

Multi-purpose applications such as steering wheels, flywheels, harmonic balancers, pulleys and gears with tapped holes.
Includes special stepped bolts for 1990-2005 GM 3300-3800 V6 crankshaft pulleys.
4-way slotted puller yoke and 2 lengths of hardened "live-center" forcing screws - a set of 3 interchangeable forcing screw tips are included to optimize pressure and prevent "walking".
Blow molded case to prevent spilling and each bolt size is molded into the storage compartment.
Three each of the following bolt sizes: M8 x 1.25 x 90mm, M8 x 1.25 x 45mm, 1/4-28 UNF x 3 inches, M8 x 1.25 x 65mm, 5/16-24 UNF x 3 inches, 5/16-18 UNC x 3.5 inches, 3/8-24 UNF x 1.5 inches, 3/8-16 UNC x 2 inches, 3/8-16 UNC x 3 inches, 3/8-16 UNC x 4.5 inches, and M10 x 1.5 x 35mm..