Reviews 4 Bay Hard Drive Reader Dock

StarTech.com 4 Bay 3.5 SATA SAS Backplane - 3 x 5.25in Bays - Trayless Mobile Rack - SATA Backplane - Removable Hard Drive Bay - HDD Rack HSB43SATSASB

  • Hot swap up to four 3.5" SATA or SAS hard drives using three 5.25" bays.
  • 4 Bay 3.5" SATA SAS Backplane with trayless design.
  • Hot Swap Mobile Rack for three 5.25" bays, supports SAS I/II and SATA I/II/III (up to 6Gbps).
  • 4 bay mobile rack with durable plastic and aluminum construction provides a cost-effective solution for drive maintenance and hot swapping drives....
  • 2 fans and venting to optimize heat dissipation / HDD Rack/ SAS Backplane/ SATA Backplane / hard drive tray / 4-bay SAS/SATA backplane / Hard drive....
Check Stock

ASUS Transformer Book 12-Inch T200TA-B1-BL 2-in-1 Detachable Touchscreen Laptop, 2 GB RAM, 32 GB Storage

  • Intel Atom Z3775 1.46GHz (Turbo up to 2.39GHz). 2 GB RAM..
  • Storage Capacity: 32GB Solid-State in tablet..
  • Includes Keyboard Dock with USB 3.0 port, USB 2.0 Port, and Ethernet Port..
  • Smart HD Bay in Dock allows for Self-Upgradable Standard 2.5-inch Hard Drive (up to 1TB).
  • 9-Hour Long Battery Life. 2MP Webcam and 5MP Rear Camera..
Check Stock

WORKDONE 12-Pack - 3.5\ Hard Drive Caddy - Compatible for Dell PowerEdge Selected 14-15th Gen. Servers - with Detailed Setup Manual - Front Sticker Labels - Screwdriver - Strong Tray Screws

  • README FIRST: The same PowerEdge server type can have two different sizes of the drive bay.  Your server HAS TO HAVE 3.5 inches Hot-Plug Drive Bay. This 3.5 inch Drive caddy supports ONLY 3.5-inch hard drives. Check that your PowerEdge Server or Drive Array is LISTED and supported..
  • SUPPORTED 3.5 inch MODELS PowerEdge 15th Generation: R250, T350, R450, T550, R550, R650, R650xs, R750, R750xs, R6515, R6525, R7515, R7525, C6520 enclosure.
  • PowerEdge 14th Generation: R240, R340, R440, R540, R640, R740, R740xd, R740xd2, R6415, R7415, R7425, XC Series appliances XC640-10, XC740xd-12 and C6420/25 enclosure, Precision 3930 Rack and 7920 Rack. Supported ONLY Hot-Plug 3.5-inch Drive Bay models. NOT compatible when your server has a 2.5-inch drive bay.
  • WORKDONE BRIGHT LED: This innovation make hard drive indicator lights brighter. The PowerEdge server backplane has activity LEDs and LED signal lights are transferred special plastic rail to the front of drive caddy. Indicator lights tell important status from the hard drive. Hard drive activity indicator green and hard drive status indicator - green and amber are now cleaner and brighter. (compared typical aftermarket products - green light in the pictures are just an illustration).
Check Stock

StarTech.com Universal Hard Drive Docking Station for SATA and IDE - USB 3.0 Dock for 2.5'/3.5' HDDs/SSDs with UASP (UNIDOCKU33), Black

  • EASY TO USE: The external hard drive docking station enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots..
  • ENHANCED WITH UASP: This USB 3.0 universal HDD / SSD dock increases performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller..
  • SMART DESIGN: This USB 3.0 universal docking station has a single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously..
  • INCREASED PERFORMANCE: The dual hard drive docking station can be used to greatly increase the storage and backup capabilities of your computer system with support for high capacity drives..
  • Connect both an IDE and a SATA 2.5 & 3.5in HDD or SSD to your computer using USB 3.0, with support for UASP for optimal performance.
  • works with USB desktop & laptop computers and SATA & IDE drives such as Samsung 840 EVO.
  • hard drive dock / HDD & SSD docking station / hard drive dock / SSD dock / HDD dock.
  • Test or benchmark virtually any hard drive or solid state drive.
  • Transfer files directly between SATA and IDE drives without a host computer.
Check Stock

USB 3.0 / eSATA Dual Hard Drive Docking Station with UASP for 2.5/3.5in SATA SSD / HDD - SATA 6 Gbps USB 3.0 Dual Drive Dock

  • Easily connect and swap two 2.5 or 3.5in SATA III drives through eSATA or USB 3.0.
  • Compatible with USB and eSATA enabled computer systems such as EliteBook 8470p and 2.5in or 3.5in SATA solid-state Drives and hard drives.
  • HDD Dock / SSD Dock / USB 3.0 Hard Drive Dock / eSATA Hard Drive Dock / External Hard Drive Docking Staiton / SATA HDD & SSD Dock SATA 6Gbps / UASP.
  • Easily transfer data from one hard drive to another.
Check Stock

StarTech.com 3.5' to 5.25' Front Bay Adapter - Mount 3.5' HDD in 5.25' Bay - Hard Drive Mounting Bracket w/ Mounting Screws (BRACKETFDBK)

  • TAA Compliant: This TAA compliant 3.5" to 5.25" hard drive mounting bracket adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases..
  • Easy to use: The front bay hard drive mounting bracket lets you install a 3.5" floppy drive, external facing USB hubs, media card readers, and fan controllers into the front bay of your computer..
  • Sturdy design: The 3.5" to 5.25" front bay bracket features an attractive open-faced black bezel that provides a secure fit..
  • Easy installation: This hard drive mounting bracket comes complete with 4 x mounting screws for a hassle-free installation..
Check Stock

StarTech.com 4-Bay Hard Drive Duplicator and Eraser, External Standalone 1:3 HDD/SSD Cloner/Copier, USB 3.0 / eSATA to SATA Docking Station, Hard Disk Copier / Sanitizer / Wiper Tool (SATDOCK4U3RE)

  • DUPLICATE, ERASE AND DOCK: This 4-bay external cloner and drive eraser/ wiper performs standalone cloning or erasing of 2.5/3.5" SATA drives.
  • Hard disk docking station for quick access to your 2.5/3.5" SATA drives over USB or eSATA.
  • DRIVE COMPATIBILITY: Works with 2.5/3.5" SATA and IDE SSDs/HDDs of any capacity.
  • Included IDE cable adapters support 40-pin/3.5in and 44-pin/2.5in drives.
  • Hardware includes eSATA and USB-A cables and Universal Power Adapter.
  • DUPLICATION AND ERASE MODES: Up to 4.2 GB/min Standalone sector-by-sector cloning.
  • Target disk must be equal/larger than the source disk.
  • Supports Quick Erase & Secure Erase (NIST SP 800-88 Rev 1 Purge).
  • Disk mount / File transfer / Backup / Recovery tool.
  • LCD MENU DISPLAY: Use push button menu navigation to select duplication and erase modes, and check drive info.
  • USB 3.2 Gen 1 (5 Gbps) or eSATA (3 Gbps) Host Device Connection (optional).
  • Top-Loading w/ Drive Doors & Eject Buttons.
  • THE IT PRO'S CHOICE: Designed and built for IT Professionals, this hard drive copier an....
Check Stock

WORKDONE 3.5 inch Hard Drive Caddy Tray Compatible for Dell PowerEdge Servers - SAS SATA HDD Adapter Sled - Handle Busy Schedule - Easy Setup with Detailed Manual - Your Saved Time is Priceless

  • README FIRST: The same PowerEdge server type can have two different sizes of the drive bay. Your server HAS TO HAVE 3.5 inches Hot-Plug Drive Bay. This 3.5 inch Drive caddy supports ONLY 3.5-inch hard drives. Check that your PowerEdge Server or Drive Array is LISTED and supported..
  • COMPATIBILITY: Supported Hot-Plug 3.5-inch Drive Bay models.
  • PowerEdge 14th Generation T340, T440, T640.
  • PowerEdge 13th Generation R230, R330, T330, R430, T430, R530, T630, R730, R730xd, R930, XC430, XC730, XC730xd.
  • PowerEdge 12th Generation R320, T320, R420, T420, R520, T620, R720, R720XD.
  • PowerEdge 11th Generation R310, T310, R410, R415, T410, R510, R515, T610, R710, T710.
  • PowerVault ME4012, MD3600, MD3400, MD3200, NX3000, MD1200, MD1400.
  • WHAT YOU GET: 3.5 inch Hard Drive Caddy accessory compatible for Dell PowerEdge Servers.
  • FINAL CHECKLIST: Suitable DELL servers with 3.5 inch Drive bay chassis and hot-plug backplanes.
  • NOT suitable for servers with a stand-alone backplane or 2.5 inch Drive bay chassis.
  • Backwards compatible with listed Generation 11 and 12 PowerEdge and PowerVault arrays.
  • Compatibility with part numbers KG1CH, F238F, 0G302D, 58CWC, 058CWC, G302D, X....
Check Stock

ORICO 3.5 Hard Drive Enclosure Type-C to SATA III Aluminum 5 Bay Raid External HDD Enclosure Up to 80TB Support RAID 0/1/3/5/10/JBOD/ClONE/Normal-WS500RC3

  • [80TB Larger Capacity] - WS series drive bay enclosure can support all 3.5inch sata hard disks under less than or equal to 16TB HDD, altogether 80TB large capacity for hard drive expansion, maximize to meet your data storage and backup demand. The 3.5inch drive enclosure also a good choice for nas expansion or the data protector in big enterprise.
  • [Support RAID Mode] - The 5 bay external hard drive raid enclosure support RAID 0/1/3/5/10/JBOD/ClONE/Normal RAID Mode which can meets different work requirements, and enlarge the ways of working habits. With back cover RAID Set and built-in RAID software management, you can choose the way you convenient. Please operation follow the page description and user manual of the 5 raid bay enclosure.
  • [Great Heat Dissipation Performance] - Designed with a built-in cooling fan and honeycomb heat dissipation holes on the front and back cover of the 5 bay type c external hard drive enclosure, made by all aluminum alloy enclosure and allows the heat generated in the use to be accelerated by the flowing wind for the great ventilation performance.
  • [5Gbps Transfer Speed] - The external hard drive enclosure adopts high performance master control scheme, and set with SATA3.0 interface, the data transfer rate of the sata 3 encl....
Check Stock