Reviews 4 Crt Module

waveshare Original Raspberry Pi Compute Module 4 IO Board for All Variants of Compute Module 4,with Real-Time Clock Dual MIPI DSI/CSI Interfaces,USB Connectors

The Compute Module 4 IO Board is a companion board for all variants of Raspberry Pi Compute Module 4(supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products..
The Compute Module 4 IO Board is designed to allow you to create systems quickly using off-theshelf parts such as HATs and PCIe cards, which might include NVMe, SATA, networking, or USB. The major user connectors are located along one side to make enclosures simple..
Connectors: Standard Raspberry Pi HAT connectors with PoE support. Standard PCIe Gen 2 x1 socket. Various jumpers to disable specific features, e.g. wireless connectivity, EEPROM writing..
RTC : Real-time clock with battery socket and ability to wake Compute Module 4 Video: 2 x MIPI DSI display FPC connectors (22-pin 0.5 mm pitch cable) Camera: 2 x MIPI CSI-2 camera FPC connectors (22-pin 0.5 mm pitch cable).
USB: 2 x USB 2.0 connectors. Micro USB socket for updating Compute Module 4. Ethernet: Gigabit Ethernet RJ45 with PoE support..

The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module driver IC is TM1637 driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube..
Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable. Control interface level can be 5V or 3.3V..
4-digit LED display module with LED brightness adjustable and clock point, can be used to display decimal, letters and so on, suitable for uses in induction cooker, micro-wave oven and small household electrical appliance..
Total 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
The Positioning holes in this LED Display Module 4 Bits has 4 M2 screws positioning hole diameter is 2.2mm and the positioning of the module is easy to install with easy to achieve the inter-module combination..

YTX51822-S01 is a high performance ,low power radio transmit and receive system module based on Nordic BLE 4.0 nRF51822 controller chips..
It has the smallest volume package in the industry, the size is 18.5 X 9.1X 2.0, suitable for most applications which pay more attention to the size..
The module integrate the complete standard low energy Bluetooth 4.0 protocol stack S110 drive..
Customer's MCU is connected to the module by UART port, it will automatically send a broadcast code after the module starts..

Resilient HA stacking with up to 6 switches (only SFP+ ports can be used for stack connections).
Up to 24 auto-sensing 1/10Gb Ethernet switching ports available.
16 internal server 10Gb (KR) Ethernet ports with auto-negotiation capability to 1Gb Ethernet.
4 external integrated 1/10Gb SFP+ Ethernet ports.
Flexible media choices for up to 4 additional 1/10Gb uplink ports with one optional FlexIO Module: 4-port SFP+ 10GbE module 3-port CX-4 10GbE copper module (supports 10Gb connections only) 2-port 10GBASE-T 10GbE copper module (supports 1/10Gb connections).

This monitor is for industrial LCD monitors, used to replace the old CRT monitors A61L-0001-0093 LCD monitor directly replace the old CRT, install the original hole location, industrial LCD panel, HONDA 20 pin signal interface, DC 24V power supply, aluminum casing, interference resistance, good heat dissipation, suitable for use in high temperature, strong interference in the work environment to use for a long time, out of the box..
.LCD port is perfect for original display, Plug and play, no need to debug, mounting holes, data interface, power lines exactly match the original display!.
Related 9 inch items for this replacement: A61L-0001-0093, MDT947B-2B with HONDA 20pin signal interface DC 24V power interface.

Compute Module DSI display adapter, 22PIN to 15PIN, allowing the Compute Module to use 15PIN DSI displays.
Suitable for Compute Module IO Board,connecting with Compute Module 4 IO Board.
Suitable for connecting with Waveshare Compute Module IO Board Plus.
Support all Waveshare DSI LCD, such as 4.3inch DSI LCD,5inch DSI LCD,4.3inch DSI LCD (with Case).

DRIVER IC: The module driver IC is for AIP650 (compatible for TM650), as well as supports multiple display characters..
4 DIGIT 7 SEGMENT: The digital tube display module is designed for 4 digit 7 segment, with stable and reliable performance..
CONTROL INTERFACE: With 4 pins, SDA is bidirectional data line, SCL is clock line, GND is for ground line, and VCC is power supply..
COMPACT STRUCTURE: The LED digital tube module is exquisite and compact, which can be flexibly used in a variety of situations..
WIDE APPLICATION: This module is suitable for 3 B+ 4, for DIY electronic devices, toy cars and instrumentation etc..

Offers a redesign from the classic Resolv A-Series monitor, with more accurate sound reproduction and a stylish new look.
5" woven carbon fiber woofer provides tight and controlled low frequency response and its 1.25" soft dome tweeter gives the high frequencies a true, natural sound without unwanted resonance.
50Hz-27kHz frequency response with Active crossover with multi-pole design for linear response.
4-position high frequency lift control that allows the monitor to be optimized for different mixing environments, and is AV shielded for operation near CRT monitors and other sensitive electronics.
Balanced 1/4-inch inputs, unbalanced RCA inputs.

【Powerful Ethernet Capability】Dual Gigabit Ethernet Base Board designed for Raspberry Pi Compute Module 4, suitable for evaluating the Raspberry Pi CM4 or being integrated into end products.
【Connecting with Compute Module 4】Standard CM4 socket and color-coded Raspberry Pi 40PIN GPIO header, suitable for Compute Module 4 Lite/EMMC series module.
【Rich Interfaces】Providing interfaces including ETH/CSI/DSI/RTC/HDMI/Micro SD/USB.
【FAN Header】5V/12V, allows speed adjustment and measurement.
【SD Card Slot】MicroSD card socket for Compute Module 4 Lite (without eMMC) variants.