Reviews 3m Super 8spray Adhesive 2

ACCSS 20 Piece Stomp Pad Surfboard Traction Grip for All Boards - Surfboards, Shortboards, Longboards, Funboard, Skimboards

  • SUPER GRIP with COMFORT: A-grade EVA traction deck pad cut with small diamond grooves.
  • hard brushed all over the surface provides ultimate grip and soft comfort to the feet..
  • MARINE GRADE 3M ADHESIVE + DUST FREE TREATMENT: This surfboard traction pad is special treated to minimize dust on them before putting up the 3M adhesive, so the super bonding ability won’t be compromised..
  • PERFORMANCE DESIGN: The surf tail pad is with 25mm beveled tail kicker, and fading center arch (max. height at 10mm) with holes..
  • FIT ALL BOARDS: 5-piece template with general size of 11.75’’x14.17’’ (30cm x 36cm), it's a traction grip pad fits almost all kinds of surfboards..
  • WORRY FREE PURCHASE: OCEANBROAD offers complete customer satisfaction of replacement or refund for any quality issues..
Check Stock

Pops Sticky Adhesive Replacement for Car Mount, Volport 6 Pack 3M Dots VHB Sticker Pads Double Sided Tape for Socket Base and Magnetic Dashboard Cell Phone Holder with 2 Pack Round Metal Plate Discs

  • ADHESIVE PADS FOR DASH MOUNT: 6pcs small 3M circles dots kit is designed for the base of expanding socket mount, collapsible grip stand, magnetic dashboard car mount, cell phone finger ring holder, wireless charger mount, dash cam mount, windshield mount.
  • Mini foam glue tapes high temperature resistant, no problem in hot/heat/warmth summer in florida. With this backup stickies adhesion replacement parts, you can replace and reattach phone socket wall mount and magnetic vehicle/truck/uber mount..
  • HOW TO USE 3M VHB ADHESIVE PAD: 1. Remove the used adhesive and clean up the mounting surface with alcohol pad if you have.
  • 2. Peel off the yellow backing film, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base.
  • 3. Peel off the red backing film, stick on the flat and clean surface you want, then wait 24 HOURS to use after stuck, that’s it..
  • TIPS for USING 3M STICKY ADHESIVE: 1.If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again. 2.Do not stick adhesive on rugged, texture silicone surface, it may not stick well, clean flat and hard surface will be better. 3. Last but the most important point, please....
Check Stock

Phone Card Holder with Phone Ring Grip, Adhesive Wallet Cell Phone Pocket Credit Card ID Case for Back of Phone,3M Sticker, Stick-on,Card Sleeve for iPhone,Samsung, Smartphones- Black

  • ...??BLACK PHONE RING GRIP: We specially designed the color of the phone ring buckle the same as the color of the phone card holder, just to offer your phone a more refined appearance. With 360°Rotation & 180°adjustment so that you can position your phone at your best viewing angle anytime..
  • ????SUPER STICKY 3M ADHESIVE: Using 300LSE 3M adhesive is more viscous than other 3M glue on the market.No loss of adhesive strength due to heat, moisture or sweat in the bag. Use Hair Dryer to heat the surface and all around of phone card hold if you wanna removes,It can be cleaned up very clean..
  • ????COMPATIBILITY MODEL: Perfectly fit Most iPhone and other Smartphones have size 4.7 inch or more larger with a Flatback, such as iPhone XS MXAS/X / 8 / 8 Plus / 7 / 7 Plus / 6 / 6 Plus/ 6s / 6s Plus, Samsung Galaxy S2 /S3 / S4 / S5 / S6 / S7 /S8 /S9 PLUS, Samsung Galaxy Note, Nexus.
Check Stock

Koala Tablet Wall Mount by Dockem Universal Damage-Free Adhesive Wall Dock for iPads Tablets Smartphones and eReaders Chrome-Plated Plastic

  • DAMAGE-FREE SETUP & REMOVAL: Installs in less than 2 minutes using damage-free 3M Command Adhesive Strips (included) that are rated to hold up to 5lbs....
  • UNIVERSAL: Uses 2 separate brackets that you can set at whatever distance required for your device, allowing for wide compatibility. This includes the....
  • NOTE ON COMPATIBILITY: While it does fit most popular tablets, the bracket supports can block ports/buttons on either side between 1.5 - 3.75 inches....
  • SIMPLE: Super easy docking and undocking, can be set up in portrait or landscape mode. No extra accessories required.
  • MOUNTING: These come with Regular 3M Command strips that are not designed to work in areas exposed to high heats or moisture (like the bathroom). 3M....
Check Stock

Sticky Adhesive Replacement for Dashboard Suction Cup Mount, 80mm (3.15') VOLPORT 4pcs 3M VHB Circle Double-Sided Extra Strong Adhesive Sticker Tapes for Dash/Camera/GPS/Ipad/Car Phone Sucker Holders

  • 1.[ Designed for Suction Cup Mount] Volport 3M round flat adhesive stickers fit for dashboard suction cup mount cradle,make your sucker stronger.It is also compatible with dash cam, GPS, car cell phone mount, iPad, tablet holder, soap dispenser, bathroom shower caddy / head /shelf /rod/, suction adhesive base/car clips, dashboard pad mounting disk, hook, towel rack/ring, rv, backup camera screen, hanging hooks, ect.You can also cut or trim the two sides sticky tabs to any smaller size you need..
  • 2.[ Genuine 3M Heat Resistant Tile Semi Permanent Sticky Adhesive Sheeting Disc Replacement ]The high temperature resistance performance of these suction cup adhesive back for dash cam mount/stainless steel holders/decorations/security camera/shower washcloth holder/towel bar/shower walls/motion sensor light/hanger/picture/hottub/kitchen/sink/glass doors/aluminum toilet paper holders reaches 120°C+，even on hot summer days in Texas,you can also use it safely, no more worries in cold weather, too..
  • 3.[ Very High Bond Stickiness ]: The adherence of these thin durable 2-sided circular waterproofing foam adhesive stickies parts pads is 40% stronger than the ordinary glue on the market. This 3M double face strength sticky part big adhesive backing dot is also....
Check Stock

Universal Golf Cart Set Belts 4 Retractable Belts Max Length 47\ and 35 x 6.9 Inch Belts Bracket Kit Fits EZGO TXT Yamaha Club Car DS(NOT FIT 2 Passenger Club Car Precedent Yamaha G29 Drive EZGO RXV)

  • ...of the light for ON/OFF, Long touch for brighter and dimmer, and our LED remembers your last brightness setting, no need to adjust every time, making it super safe to operate the light while driving the cart..
  • 003cb003eONE MINUTE INSTALL:003c/b003e Simply press and hold for 60 seconds the included triple strength 3M adhesive pad to any plastic, metal, or glass surface. Our upgraded 3M tape was specifically chosen to support the weight of our light for a ceiling mount in a moving golf cart..
  • 003cb003eBATTERY-POWERED:003c/b003e Three AAA batteries (batteries not included), means longer-lasting and brighter light beam. Last up to 7 hours in full brightest and much longer when dimming is engaged. Super Bright LEDs in high settings produce 80 lumens and last up to 20,000 hours..
  • 003cb003eBUY WITH CONFIDENCE:003c/b003e Our Golf Cart LED Light is a lifesaver. You will discover operating a golf cart at dusk or nighttime is a lot safer with a dimmable interior push light. If you don’t ABSOLUTELY LOVE our product we offer 100% Money-Back GUARANTEE no questions asked..
  • 003cb003eWHAT IS INCLUDED:003c/b003e 2 Golf Cart Specific LED Lights, 2 triple strength 3M adhesive pads with Hook-n-Loop back, Instruction manual, and MADSON GOLF gift box packaging. AAA batteries....
Check Stock

Double Sided Tape 3M VHB Mounting Tape 1 Inch x 18 Feet Length Heavy Duty Waterproof Black Foam Tape for Home Office Automotive Decorations and LED Strip Lights

  • ...car registration plates, name plates, address plaques, signs, emblem, car holders, mosquito/bug screen, metal mailbox, mirrors, hangers, tooth brush holder, photo frames, power strip and other automotive home office decorations..
  • PRODUCT FEATURES: 3M VHB 2 Sided Acrylic Foam Tapes is double coated pressure sensitive adhesive tapes for bonding a wide variety of substrates including lower surface energy materials and smooth surfaces, such power coated paints, glass, marble, plastic, tile, wood and lamination.
  • but not good to heavy textured surfaces and painted walls (taken off paints while removal). Excellent temperature resistance, water moisture resistance, removal and residue free..
  • PRETREATMENT GUIDELINES: For maximum bond strength, the surfaces should be thoroughly cleaned with a 50:50 mixture of isopropyl alcohol and water. Ideal tape application is accomplished when temperature is between 70° and 100°F (21° and 38°C) and the bond is allowed to dwell 72 hours. Initial tape application to surfaces at temperatures below 50°F (10°C) is not recommended..
  • INSTALLATION: Clean and dry surface first, wipe with ADHESION PROMOTER if some surface does not work well, apply the tape to objects (warm up the adhesive if weather is too cold) and let it cure f....
Check Stock

LISEN Magnetic Phone Holder for Car Fit Curved Surfaces Car Phone Holder Mount Flexible & Stable Dashboard Magnetic Phone Car Mount with 3 Metal Plates Fit All iPhone 14/13/12/11,Pro,Pro Max,Android

  • LEGENDARY STABLE MAGNETIC PHONE HOLDER FOR CAR: With 2 3M adhesive pads, 6 magnets and an adjustable arch bridge design, this is definitely the most revolutionary magnetic phone car mount on the market. 2 sticky pads firmly stick the mount to any flat or curved surface. 6 magnets can hold all large mobile phones with metal plates. Arch bridge adjustment design can provide a larger and better field of vision. You won’t find a second such powerful and ingenious phone mount for car on the market..
  • DOUBLE ADHESIVE PADS, LARGER STICKING AREA: This magnetic phone mount for car adopts the design of double 3M adhesive pads with a larger area, and the sticking area is at least 200% bigger than other ordinary single adhesive pad one. The larger sticking area can fit the curved dashboard to the maximum extent. Thereby improving the stability and durability of the adhesive magnetic car mount by 200%.That car phone holder mount comes with 2 additional high quality 3M adhesive pads for replacement..
  • GRAPHENE 3M ADHESIVE, EXTREMELY STABLE: The adhesive strength of this upgraded double-pad magnetic car phone mount is over 66 lbs. The graphene-based adhesive pad has gorgeous heat resistance and heat dissipation. Tested by LISEN laboratory, in an atmosphere of 12....
Check Stock

Battery Operated Motion Sensor Cabinet Strip Lights, 9.8Ft 90 LED Counter Closet Strip Light, Motion & Night Sensor Safe Tape Light with 3AA Large Battery for Stairs,Wardrobe,Kitchen (Cool White)

  • Motion Sensor Strip Lights: The motion sensor range is 120°, sensor distance is 10ft (3m) , Manual delay, you can manually set the delay 20s/60s or steady on, Super saving energy.
  • Day & Night 2 Sensor Modes: Day Mode ☼ means the Light up as long as triggered by the motion.
  • Night Mode ☽ means Only Light up triggered by the motion in the dark.
  • Easy to Install: 3M adhesive can be easily pasted on a smooth surface. The battery box have magnetic strip and comes with 3M double-sided adhesive, which is applicable anywhere.
  • Cuttable Motion Activated LED Light Strip: Every one leds as a unit is with a cutting mark, please cut it according to its cutting mark. Indoor waterproof IP44.
  • Powered by 3*AA Batteries (NOT INCLUDED), Really safe and easy to assemble and to put up & take down.
  • Widely use anywhere you need, like kitchen, wardrobe, cabinet, doorway, drawer, cupboards, staircases, under beds etc..
Check Stock