Reviews 3d Printer Glass Bed

Sovol SV01 Upgraded 3D Printer 95% Pre-Assembled with Direct Drive Extruder Meanwell Power Supply Glass Plate & Built-in Thermal Runaway Protection 280x240x300mm

  • ★ Direct Drive Extruder ★: Sovol SV01 features with direct drive extruder and dual Z lead screw, greatly increase its printing stability and....
  • ★ Meanwell Power Supply ★: Built-in branded Meanwell power supply ensures stable and sufficient power, heat up the hotbed and nozzle fast.....
  • ★ Removable Glass Plate ★: This 3D printer comes with a flat glass plate on the regular heated bed, greatly resolving warped bed issues. No matter....
  • ★ Semi-Assembled Kits ★: Sovol Direct Drive Extruder 3D Printer comes with several partially assembled kits, just only take you at most 30 minutes....
  • ★ Sovol Support ★: All of our products are shipped to the consumer directly from the manufacturer, we provide lifetime technical assistance.....
Check Stock

Wide Blue Painters Tape, 6 inch x 60 Yards, 3D Printing Tape, Easy Clean Removal up to 21 Days, Masking Tape

  • Wide Blue Painters Tape - Tapix 3d printer tape is easy to use and remove as well because of its width. The width allows you to put one stripe of tape to cover your print bed instead of cutting and pasting various 1-inch stripes of adhesion tape. For almost all types of the commonly used print bed, only one stripe of Tapix blue tape will be enough to cover your entire printer bed..
  • 3D Printing – Blue painters tape is the preferred use for 3D printing projects. It is simple, cheap and effective. Using our wide painters tape will make it easy to cover your whole 3D printer bed. By applying blue tape to the print bed, you will be able to remove the 3D print from the bed with ease when done printing..
  • Adhesive - Blue painters tape sticks well to common 3D printing beds. Stripes of tape can be applied to the build platform surface and easily removed or replaced when ready to do a new project. It adheres well to the print bed and leaves no residues behind..
  • Premium Quality Blue Tape - Blue painters tape is strong, flexible, durable, and versatile. Our 3d printer tape is heat resistant so it can withstand up to 190°F/87°C heated beds and the heat of the filament. Available in several widths 4”, 6”, 9”, and 12”..
  • Painting - Wide Blue Painters Masking....
Check Stock

Glass Bed, Upgraded 3D Printer Platform Tempered Glass Plate Build Surface Cover for Anet A8 /A6/ A2/ ET4 (220x220x4mm)

  • BED MATERIAL-100% Genuine Borosilicate Glass is coated with inorganic microporous coating and has a hardness of 8 Mohs, heat resistance up to 400 ℃..
  • BUILD SURFACE TEMPERATURE SETTINGE- PLA: 50-70ºC TPU: 50-70ºC ABS: 100-125ºC (recommended 110ºC) PC: 100-130ºC (120ºC is recommended) Nylon: 90-120ºC (110ºC is recommended) PP: 100-130ºC (120ºC is recommended) PETG: 50-70ºC.
  • SIZE&COMPATIBILITY-Build Surfaces have 4 different size to choose 220x220x4mm Works for Anet A8 /A6/ A2/ ET4,235x235x4MM Works for CREALITY Ender3 300x300x4MM Works for Anet E12 E16 A8PLUS ET5 Artillery SW-X1 310x310x4MM Works for CREALITY CR10.
  • NO EDGE CURLING - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • QUANLITY ASSURANCE-All products in this shop provide free lifetime service.
Check Stock

TRONXY X5SA PRO 3D Printer with Glass Bed Upgrade, Full Metal Frame CoreXY Printer with Auto Leveling, OSG Guide Rail+Titan Extruder+Silent Board, Large Build Volume 330×330×400mm

  • [New Upgraded Version] - Professional industrial grade DIY FDM 3D printer, Core XY structure + Square structural support, higher stability. 3D printer large build volume 330×330×400mm. Configuration boost - OSG Dual Guide Rail+Titan Extruder+Glass Bed+Black TR-Sensor, improve the printing effect of the model, small error, high speed and low noise, more smooth to use.
  • [Main Function] - Black Auto Leveling Sensor, one-key leveling,16 points data collection, compensate Z-axis for height deviation, can be detected opaque materials, use with glass beds.
  • Multiple strong timing belts drive, adjustable tension, stable operation and printing accuracy.
  • Filament detector + Resume print function, avoid time and filament waste.
  • [Core Components] - Highly wear-resistant, silent pulley to ensure printing speed.
  • Titan extruder reduces the risk of poor extrusion, support TPU filaments.
  • Dual Z-axis and upgraded motor, precise positioning transmission, stable performance.
  • Two-way fan, maintain better cooling efficiency. Reduce errors in printing, easy to achieve high-precision printing.
  • [Interesting] - DIY assembly type industrial-home dual-purpose 3D machine, suitable for manual skills and experienced large 3D printer enthusiasts, transforming machines and building she....
Check Stock

3D Parts Heater Bed of Ender 3 / Ender 3 Pro 3D Printer Replacement Parts Aluminum MK3 Heatbed Hotbed Platform with Heated Bed Cable Line for Ender 3 V2/ Ender-3 /Ender 3 Pro

  • Ender 3 Replacement Heater Bed DC 24V 220W with Cable Installed for Creality 3D Printer Ender 3/Ender 3 Pro / Ender 3X.
  • Original 3D Printer Ender 3 Replacement Parts / 3D Printer Accessories for Ender 3 / Ender 3 Pro / Ender 3X.
  • Ender 3 Pro Hotbed with Cable Which be Installed Well. Build Surface with 3M Adhesive which easily to stick on the heater bed platform..
  • 3D Printer Ender 3 Replacement Heater Bed with Free Technical Support..
Check Stock

Creality 3D Printer CR-10 S5 CR Touch auto Leveling 3D Aluminum DIY Printer with Resume Print Open Source Large Print Size 500*500*500MM

  • 【THE LARGEST CREALITY 3D PRINTER】 Creality 3D printer CR10 -S5 is the largest 3d printer. The Creality CR-10 S5 desktop 3D printer offers the....
  • 【CR TOUCH AUTO BED LEVELING SENSOR KIT】The Creality Largest FDM 3D printer CR10-S5 new version comes with CR touch. High Precision Intelligence....
  • 【DUAL Z-AXIS AND DUAL MOTOR】Creality CR10S 3d printer has Dual Lead Screw Z-axis design, give much stability and accuracy than single lead screw....
  • 【POWER LOSS RECOVERY AND FILAMENT SENSOR FEATURES】The function of CR10S-5 detecting filament run-out or breakage/power loss and resume printing....
  • 【SOLID GLUE STICK INCLUDED IN PACKAGE 】Creality CR10S 5 has comes with large hot bed, preheating time make longer than others, and there is the....
Check Stock

Dremel DigiLab 3D45-01 3D Printer with Filament - Heated Build Plate & Auto 9-Point Leveling - PC & MAC OS, Chromebook, iPad Compatible - Nylon, ECO-ABS, PETG, PLA Print Capable

  • ADVANCED 3D PRINTING: The Dremel Digilab 3D45 Idea Builder 3D printer is one of the best 3D printer options for printing advanced materials. It is ECO-ABS, Nylon, PETG and PLA filament friendly, and with an all-metal 0.4 mm nozzle that heats up to 280°C and a removable glass build plate that heats up to 100°C, you can print almost any 1.75mm filament with ease..
  • BEST IN CLASS: The winner of PCMag.com’s 2022 Editors’ Choice Award for Best 3D Printer for Professionals and Small Businesses, a Google For Education Partner, and built to withstand daily use, the Dremel 3D45 3D Printer Kit is the ideal purchase for architecture, engineering, university use, or commercial 3D printers..
  • EASY TO USE: Our guided setup process gets you from unboxing to printing in just a few minutes. The 4.5 inch full color touchscreen has an intuitive interface so you can quickly navigate through different functions, and the built-in RFID reader detects the 1.75mm Dremel filament that you place inside and automatically chooses the best print settings for you..
  • TOP RATED FEATURES: Features include an automated 9 point leveling sensor that detects any variation in the print bed and automatically accounts for it for more successful printing, a built-in HD camera for remote prin....
Check Stock

8 Pieces 3D Printer Heat Bed Leveling Parts Silicone Solid Column OD 0.63 Inch ID 0.16 Inch Stable Hot Bed Tool Heat-Resistant Buffer Compatible with CR-10 Ender 3 Bottom Connect Black

  • Material: 3D printer heat bed parts are made of heat-resistant silicone, solid bed mounts is very stable, not shaking, heat-resistant and....
  • Function: larger contact surface than spring, reduce shock, heatbed silicone leveling column better to level your 3D printer.
  • Size: the outer diameter 16 mm/ 0.63 inch, inner diameter 4 mm/ 0.16 inch, height is 18 mm/ 0.71 inch.
  • This heat-resistant and pressure-resistant....
  • Application: replace original spring leveling for 3D printer hot bed platform.
  • Simple installation, no need complicated tools, convenient for using.
  • Package includes: there are 8 pieces heat bed silicone leveling column, enough to meet your need, suitable for 3D printer hot bed and platform bottom....
Check Stock

ADIMLab Gantry Pro 3D Printer 24V Power 310x310X410 Build Volume Resume Print Run Out Detection Lattice Glass Platform Modifiable to Upgrade to Auto Leveling&WiFi

  • 90% pre-assembled 3d printer, dual Z-axis motors and dual Y-axis tracks, supply eccentric nuts to fasten the X/Y/Z pulleys or carriages, make the....
  • Titan direct extruder and dual fans to cool the hot end, make the extruder system more stable and wear resistant. The operation is more convenient....
  • Lattice glass is on hot end, make it easy to leveling and first layer stick and get off, the connector for the bed wire will be strong enough to....
  • Supply resume print and filament run out detection functions, Customer can upgrade the auto leveling& touch screen& wifi functions by self,....
  • ADIMLab Gantry Pro 3d printer includes: ◆The hot bed with Lattice Glass Platform ◆24V15A UL Certified Power supply ◆Titan....
Check Stock