Reviews 3d Printer Filament Storage

JAYO 3D Printer Filament Dryer Box,Printing Filament Dry Box for Filament Drying and Storage,Dehydrator of Filament,3D Printing Filament Holder Compatible with 1.75mm,2.85mm,3.00mm Filament 1kg Spool

  • ➽JAYO Filament Dryer and Storage Box: JAYO 3D printer filament dryer dry filament, which helps you reduce the impact of the objective environment on....
  • ➽Personalized Time and Temperature Setting: The default continuous drying time of the JAYO filament dryer is 6 hours at 50℃. The time range and....
  • ➽User-friendly Design: JAYO dryer is made up of a transparent lid, a white bottom, a 2-inch LCD screen(display temperature and time), 2 built-in....
  • ➽Compatible with most 3D Filament Spools: Most widely used filament often requires 3-6 hours of drying to achieve a good printing experience and the....
  • ➽Partner for 3D Printer Filament: JAYO filament dryer box keeps heating up to your preset temperature and works until up to the preset time with the....
Check Stock

Flexible TPU 3D Printers Filament 1.75mm Color is Clear Accuracy +/- 0.05mm Net Weight 1KG(2.2LB) Transparent TPU Hardness 95A…

  • 【1.75MM TPU(flexible) FILAMENT】 The TPU(flexible) filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle TPU(flexible), TRONXY 3D printer filaments have adjusted the degradability of the material for optimal performance, so TRONXY TPU(flexible) filaments are not brittle during 3D printing jobs.
  • 【+/-0.02MM TOLERANCE】TRONXY TPU(flexible) 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.02 mm. No matter which 3D printer you are using, the consistently round diameters provide optimum flow through the extruder nozzle. Almost all 1.75 mm-specification 3d printers in the market are configured to run with the TPU(flexible) 3D printing filaments.
  • 【VACUUMED SEALED PACKAGING】Some 3D printing materials can be negatively affected by moisture, so this is why TRONXY 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
  • 【100% ENVIRONMENTAL FRIENDLY】TRONXY 3D printer filaments comply with the Restriction of Hazardous Substance (....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Black ABS 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Black ABS 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • ABS Filament Specs: Black - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Print Temperature: 240°C - 260°C (464°F - 500°F)/ Print Bed Temperature: 80°C - 110°C (176°F - 230°F).
  • Why INLAND ABS Filament: Designed with the high quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm White ABS 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm White ABS 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • ABS Filament Specs: White - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Print Temperature: 240°C - 260°C (464°F - 500°F)/ Print Bed Temperature: 80°C - 110°C (176°F - 230°F).
  • Why INLAND ABS Filament: Designed with the high quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Blue ABS 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Blue ABS 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • ABS Filament Specs: Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Print Temperature: 240°C - 260°C (464°F - 500°F)/ Print Bed Temperature: 80°C - 110°C (176°F - 230°F).
  • Why INLAND ABS Filament: Designed with the high quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

BOSOKU PLA 3D Printer Filament Matte Black/Blue/Green/Grey PLA Filament 1.75mm Dimensional Accuracy +/-0.02mm, 4 Assorted Colors, 4 Spools

  • ✔️【PREMIUM MATERIALS】: 3D printer filament made of 100% new pure Polylactic Acid material, or PLA, is a bio-plastic printing material derived from natural materials, which boasts complete biodegradation and lower melting temperature, eco-friendly and safe, with no odor during the printing.
  • ✔️【4 ASSORTED COLORS】: PLA plus filament 1.75 set includes 4 Assorted Colors(4 Spools), Matte Black PLA/ matte Blue PLA/ matte Green PLA /matte Grey PLA, that offer multiple choices for your artistic creation, special colors suitable for printing lampshades, vases, and other design parts.
  • ✔️【3D PRINTING TEMPERATURES】: Recommended Printing Temperature of your PLA 3D printer filament: 374 °F to 410°F (190℃~210℃), high precision diameter 1.75mm PLA filament roll with tolerance: +/-0.02mm, that brings maximum smooth performance, no breaks, no bubbles, no clogging during even the most delicate of 3D printer work.
  • ✔️【HIGH COMPATIBILITY】: Your 3D printer filament PLA is easy to press and works with the most well-known 3D Printers with PLA filament 1.75mm in the market place for 3D art craft making.
  • ✔️【4 COLORS PACK】- 4 Spools，250g Matte PLA filament in one Package, Within 24 Hours Reply, 100% Satisfaction Guarantee, If you're no....
Check Stock

3D PETG Filament 1.75mm Black 3D Printer Filament 1kg Spool PETG Filament Dimensional Accuracy +/- 0.02 mm PETG Black XVICO

  • 【PETG Filament Printing Tips】 petg 3D filament has the advantages of high purity with low shrinkage and superb layer bonding, Filament 1.75mm meeting your demands for different printing projects. 1.75 petg Filament 100% made of environment-friendly natural materials, harmless to users and the environment.petg Filament Recommended Extrusion/Nozzle Temperature 230°C – 240°C, Bed 70°C – 80°C..
  • 【petg filament 1.75mm Clog-free & Bubble-Free】3D Printer Filament approximately 2.2 LBS 1 KG Spools.petg filament Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Since the petg filament is prone to moisture, please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance..
  • 【PETG Filament Less-tangle & Wide Compatibility】3D Petg Filament Full mechanical winding and strict manual examination, which guarantee the Petg filaments tidy and easy to be fed.The 1.75mm filament You don’t have to worry that it will be incompatible with your 3D printer — 1.75 mm in diameter, dimensional accuracy +/- 0.02 mm. It works perfectly with most FDM 3d printers on the market..
  • 【3D Petg Filament ACCURACY & CONSISTENCY】....
Check Stock

EIBOS 3D Printer Filament Dryer Box 3D Filament Storages with Fan Keeping Filaments Dry During 3D Printing Compatible with 2 Rolls 1.75mm 2.85mm 3.00mm PLA PETG ABS Spool Holder

  • 【DRYER & STORAGE BOX】the dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a....
  • 【ADJUSTABLE TEMPERATURE & HUMIDITY MONITOR】adjustable heating temperature to accommodate needs of various filaments, actual and setting temp are....
  • 【COMPATIBLE WITH MULTIPLE SPOOLS】filament dryer box works for different filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D....
  • 【REVIVE YOUR BRITTLE FILAMENT】filament dryer box aims at drying the wet or brittle 3D printer filament, or even make it better than the brand new....
  • 【100W PTC HEATER】Different from applying ordinary heater 48W PI heating pad to heat up space, our product use 100W PTC heater which is more....
Check Stock

YOUSU Flexible TPU 3D Printer Filament Black TPU Filament 1.75mm 1kg, Dimensional Accuracy +/- 0.03 mm, 95A Shore Hardness and Good Layer bonding Performance.

  • [ 95A Shore Hardness Flexible 3D Filament ] – Yousu Flexible Filament Enables you print shoe insole, phone case, sporting goods, medical devices, automotive instrument panels..
  • [ Strong layer bonding like injection parts ] –1Kg TPU filament Spool has Unique recipe enables the printing parts function similar like TPU injection parts..
  • [ Good compatibility ] – Yousu 3D Printing Filament Suitable for many existing 3d printer in the market. Such as Raise 3D, Makerbot Replicator 2 & 2x, Flashforge creator pro, Monoprice MakerSelect, Prusa i3, iDo, Troxy, Wanhao… Before purchase, it is better to consult with your 3d printer supplier whether the printer can print flexible 3d filament..
  • [ No warping & Precision Diameter ] – Yousu TPU Filament has excellent first layer adhesion to reduce warpage, shrinkage, curl and print failure. Good diameter control..
  • [ Technical support available ] – All Yousu Filament come with a guarantee,human technical support are provided..
Check Stock